Author Topic: ARCEE Guitars. Check this out! :) (Read 78270 times)

yahoo! · « **Reply #100 on:** April 24, 2009, 09:57:03 AM »

Quote from: paengkee on April 24, 2009, 12:52:43 AM

it has begun...

kakambal yata ng gitara ko gitara ni Bakit?.

nice

paengkee · « **Reply #101 on:** April 24, 2009, 06:45:36 PM »

Quote from: bakit? on April 24, 2009, 08:19:25 AM

@paengkee,69 neck papagawa mo?iniisip ko din whole guitar na pacustom ko e?na inspire ako nung mga gawa ni bill nash.kaya ni sir arcee mga ganun.hehehe.

actually mejo weird ang balak kong neck. trapezoidal neck profile. natry ko kasi warwick bass ni incx and nasarapan ako sa feel natural na natural.

paengkee · « **Reply #102 on:** April 24, 2009, 08:22:08 PM »

bakit? · « **Reply #103 on:** April 26, 2009, 03:46:44 AM »

Quote from: paengkee on April 24, 2009, 08:22:08 PM

nice.hehe.gusto ko mga to oh:

http://ukinam1978.multiply.com/photos/album/44/ahhh_gas_gas_gasgasgasgas#4

magtataho7 · « **Reply #104 on:** April 26, 2009, 09:59:53 AM »

Ayos yung distressed look ah. Kung pwede sana palitan yung logo, mukha kasi sticker na dinidikit sa ref...

low_end · « **Reply #105 on:** June 15, 2009, 02:37:51 PM »

up for sir arcee and sir raph...pinamod ko bass ko sa knaila..galing..satisfied customer here...lapit pa sa min...down to earth ang magama..nice job sir arcee and raph...i'll be back for future projects.hehehe

kurt_morello · « **Reply #106 on:** July 22, 2009, 02:09:26 AM »

nanggaling din ako dun... mabait sila.... hehe. nabali kasi neck ng sg ko... i'll post ung pics pag ok n ok. na.

kurt_morello · « **Reply #107 on:** July 22, 2009, 02:19:07 AM »

hehe. nakita ko na mga gitara niyo.... hehehe.

maganda ung neck!!! ung body di ko pa nakita na tapos eh.. .

pero nice nice!!!

Taoistguitarist · « **Reply #108 on:** October 17, 2009, 01:55:11 AM »

hi everyone. i'd like to share pictures of my ARCEE custom guitar.

the neck is actually from a barclay wolfgang copy that i purchased from one of the sellers here in philmusic. It used to have a lifeless plywood body but was advertised as solid mahogany ( i found out when i checked the guitar cavity when i got home and unfortunately the seller won't give my money back....go figure

)

Newly rewound Alnico P90's
Salvaged OFR
Tone Chambered Northern Ash Body
Jumbo Frets

thanks to ARCEE for making this guitar blunder into a roaring beast!

changedmynametojimi · « **Reply #109 on:** October 17, 2009, 02:02:58 AM »

Quote from: Taoistguitarist on October 17, 2009, 01:55:11 AM

hi everyone. i'd like to share pictures of my ARCEE custom guitar.

the neck is actually from a barclay wolfgang copy that i purchased from one of the sellers here in philmusic. It used to have a lifeless plywood body but was advertised as solid mahogany ( i found out when i checked the guitar cavity when i got home and unfortunately the seller won't give my money back....go figure )

Newly rewound Alnico P90's
Salvaged OFR
Tone Chambered Northern Ash Body
Jumbo Frets

thanks to ARCEE for making this guitar blunder into a roaring beast!

congrats reg!

if that ain't pretty, i don't know what is...

cacophony · « **Reply #110 on:** October 17, 2009, 02:46:17 AM »

Quote from: Taoistguitarist on October 17, 2009, 01:55:11 AM

hi everyone. i'd like to share pictures of my ARCEE custom guitar.

the neck is actually from a barclay wolfgang copy that i purchased from one of the sellers here in philmusic. It used to have a lifeless plywood body but was advertised as solid mahogany ( i found out when i checked the guitar cavity when i got home and unfortunately the seller won't give my money back....go figure )

Newly rewound Alnico P90's
Salvaged OFR
Tone Chambered Northern Ash Body
Jumbo Frets

thanks to ARCEE for making this guitar blunder into a roaring beast!

ayun oh!

peabrain12789 · « **Reply #111 on:** October 17, 2009, 09:30:44 AM »

magkano kaya pa-repaint?

.bong. · « **Reply #112 on:** October 17, 2009, 11:15:49 AM »

Sir taoistguitarist, nice guitar.

coolaxer · « **Reply #113 on:** October 17, 2009, 12:38:51 PM »

kapitbahay ko lang pala yan di ko alam hahah..

stringman · « **Reply #114 on:** October 17, 2009, 12:42:35 PM »

Quote from: Taoistguitarist on October 17, 2009, 01:55:11 AM

hi everyone. i'd like to share pictures of my ARCEE custom guitar.

the neck is actually from a barclay wolfgang copy that i purchased from one of the sellers here in philmusic. It used to have a lifeless plywood body but was advertised as solid mahogany ( i found out when i checked the guitar cavity when i got home and unfortunately the seller won't give my money back....go figure )

Newly rewound Alnico P90's
Salvaged OFR
Tone Chambered Northern Ash Body
Jumbo Frets

thanks to ARCEE for making this guitar blunder into a roaring beast!

Reg, may extra floyd ka pa diyan?

peabrain12789 · « **Reply #115 on:** October 17, 2009, 03:42:25 PM »

road map naman jan gusto ko pumunta dito tho di ako gamay pumunta ng pacita...

from alabang pls... directions lang po...

ian1227 · « **Reply #116 on:** October 17, 2009, 11:04:46 PM »

Quote from: peabrain12789 on October 17, 2009, 03:42:25 PM

road map naman jan gusto ko pumunta dito tho di ako gamay pumunta ng pacita...

from alabang pls... directions lang po...

bro sakay ka lang ng mga dumadaan na greenstar na bus papuntang acita.. ang baba mo complex.. sakay ka ng trike sabihin mo pacita 1 monday street.. hanapin mo #6 na gate.. may black na auto.. hehe

charles55 · « **Reply #117 on:** October 18, 2009, 04:29:02 PM »

ganda nung wolfgang guitar custom..hehe

fraudulentzodiac · « **Reply #118 on:** December 06, 2009, 06:15:18 PM »

guys, galing ako kanila sir Ruel kanina lang. I checked on my custom guitar and settled some of the balance.

anyway, I was able to try their tele-strat hybrid which was mostly done by Raph. Stupid me forgot to take photos. The guitar was very, very, and I MEAN VERY IMPRESSIVE, specially the pickups Raph made himself (seriously, made-not just re-wound or something). Those single coils he made easily puts the Texas Specials to shame, seriously. I've tried it on my friend's strat, walang binatbat dun sa gawa ni Raph. It was his first project btw, and it wasn't bad at all. In fact, it's a lot better than your everyday squier or even an MIM fender.

The guitar sports an ash tele body with a strat bridge and pickguard assembly, a maple neck with a rosewood fretboard with a telecaster headstock. 60's C-shape neck and block "wood" inlays. Sayang talaga nakalimutan ko kuhanan ng litrato. I hope the father and son tandem will be kind enough to post that guitar here. I was even joking them if they would sell it, ayaw hehe.

I got a lot more excited on my custom, sana matapos na ASAP. Btw, I saw paengkee's "jazzmaster" and it's almost done. @paengkee, dude, the grains on your guitar is to die for, promise, specially on the backside.

ian1227 · « **Reply #119 on:** December 06, 2009, 08:36:43 PM »

Quote from: fraudulentzodiac on December 06, 2009, 06:15:18 PM

guys, galing ako kanila sir Ruel kanina lang. I checked on my custom guitar and settled some of the balance.

anyway, I was able to try their tele-strat hybrid which was mostly done by Raph. Stupid me forgot to take photos. The guitar was very, very, and I MEAN VERY IMPRESSIVE, specially the pickups Raph made himself (seriously, made-not just re-wound or something). Those single coils he made easily puts the Texas Specials to shame, seriously. I've tried it on my friend's strat, walang binatbat dun sa gawa ni Raph. It was his first project btw, and it wasn't bad at all. In fact, it's a lot better than your everyday squier or even an MIM fender.

The guitar sports an ash tele body with a strat bridge and pickguard assembly, a maple neck with a rosewood fretboard with a telecaster headstock. 60's C-shape neck and block "wood" inlays. Sayang talaga nakalimutan ko kuhanan ng litrato. I hope the father and son tandem will be kind enough to post that guitar here. I was even joking them if they would sell it, ayaw hehe.

I got a lot more excited on my custom, sana matapos na ASAP. Btw, I saw paengkee's "jazzmaster" and it's almost done. @paengkee, dude, the grains on your guitar is to die for, promise, specially on the backside.

yah!!! natry ko dun yun.. to the max.. i want to swap my beloved axe na nga for that hybrid e.. haha.. sabi ko how much aabutin for a copy.. tignan nalang daw namin ni raph.. pwahahaha

ukeleleboy · « **Reply #120 on:** December 07, 2009, 10:17:51 AM »

ganda ng mga custom...

jamesplaysguitar · « **Reply #121 on:** December 07, 2009, 02:56:05 PM »

waahh!!!phase 7 lang c sir ruel phase 6 lang ako sa pacita..Its been so long na naghahanap ako ng luthier na malapit lang.Thank God this thread was revived.Bakit ngayon k lang to nakita.haysh

Papacustom ko les paul ko. Makabisita nga mamya.

MEGADENZ · « **Reply #122 on:** December 07, 2009, 03:41:22 PM »

^ Whoa, ako rin nagulat, tagal ko ng nakatira sa Pacita, ngayon ko lang to nabasa, too bad I stay mostly nowadays in sta. mesa, good thing malapit lang kina sir jon ...

scofield · « **Reply #123 on:** December 07, 2009, 05:27:08 PM »

galing nga to i was in their place a couple of weeks back, ang ganda ng tunog ng pickups ng rj Les paul nila hahaha

bka pa rewind ko din pickups ko skanya gawing alnico ung ceramic na gibsons

great work

st_anger · « **Reply #124 on:** December 07, 2009, 06:14:38 PM »

Quote from: Taoistguitarist on October 17, 2009, 01:55:11 AM

hi everyone. i'd like to share pictures of my ARCEE custom guitar.

the neck is actually from a barclay wolfgang copy that i purchased from one of the sellers here in philmusic. It used to have a lifeless plywood body but was advertised as solid mahogany ( i found out when i checked the guitar cavity when i got home and unfortunately the seller won't give my money back....go figure )

Newly rewound Alnico P90's
Salvaged OFR
Tone Chambered Northern Ash Body
Jumbo Frets

thanks to ARCEE for making this guitar blunder into a roaring beast!

sir 1 piece ba yung body? ikaw ba nagprovide ng wood?

News:

Author Topic: ARCEE Guitars. Check this out! :) (Read 78270 times)