LINE 6 M9/M13 users thread (with photos)

[jracz_28]

Dont know about the first issue. Never happened to me. Did it recur?

About the second issue, there is an autosave and manual save feature. If you left your effects turned on then you unplug the unit, if will come back like you left if on auto save. Switch to manual save and see if there is a positive result. Dont forget to save your setting though

so far di na po naulit yung first issue sir. ittry ko yung suggestion mo sir... Thanks for the advise. normal din po ba na may sound p din yung guitar s amp even naka-off na yung M9? kahit na naka DSP Bypass sya sa settings? napansin ko dn po kasi kagabi. patry naman po nung sa inyo if the same. even other M9 users, please advise naman po if same din yung sa inyo... thanks ng marami...

[pao2pao16]

so far di na po naulit yung first issue sir. ittry ko yung suggestion mo sir... Thanks for the advise. normal din po ba na may sound p din yung guitar s amp even naka-off na yung M9? kahit na naka DSP Bypass sya sa settings? napansin ko dn po kasi kagabi. patry naman po nung sa inyo if the same. even other M9 users, please advise naman po if same din yung sa inyo... thanks ng marami...

Of course normal un. How can you play guitar when you cant pass through an off unit? That is not called bypass for nothing.

[Muzickero]

Buhayin ko lang ulit to.

I have a question regarding pitch shifting capabilities of the M9.  Naka Drop C# kasi ang  usual tuning ko but sometimes there are song na kelangan ko tugtugin ng standard tuning so I use the "pitch glide".

Kaya lang ang issue ko sa kanya is parang may ringing sound sometimes lalo na pag clean lang which based on my experience is depende din sa picking.

Ganito din ba sa inyo? Or can you suggest other settings para makuha ko yung standard tuning or dapat ba ko kumuha ng separate pitch shifter pedal?

[rschua]

Buhayin ko lang ulit to.

I have a question regarding pitch shifting capabilities of the M9.  Naka Drop C# kasi ang  usual tuning ko but sometimes there are song na kelangan ko tugtugin ng standard tuning so I use the "pitch glide".

Kaya lang ang issue ko sa kanya is parang may ringing sound sometimes lalo na pag clean lang which based on my experience is depende din sa picking.

Ganito din ba sa inyo? Or can you suggest other settings para makuha ko yung standard tuning or dapat ba ko kumuha ng separate pitch shifter pedal?

You mean like a ring modulator sound specially when playing more than 1 note? It is some sort of hardware limitation causing a tracking error or sometimes delayed output sound. The M9/M13 willl not give you a decent pitch shifter due to H/W limitation. I have a Zoom G3 and it has a better pitch shifter and you can play a decent multi note/polyphony and still get better result.

The best advise is for you is to tune your guitar to standard then get a Morpheus DropTune (www.youtube.com/watch?v=DcDvSq1pFjA) to drop the tuning to C# using the pedal. With this setup, you can get at least 85% decent dropped tune sound (since there is no substitute to the real thing) and will no longer be noticeable within the mix. HTH 

[sinosimelo]

sino merong USB-MIDI na hindi na ginagamit? baka gusto nyong ibenta for cheap, pm me! 

[rschua]

sino merong USB-MIDI na hindi na ginagamit? baka gusto nyong ibenta for cheap, pm me! 

I have an M-Audio midi UNO mint as new and complete with box, manual etc. selling it at 1.5k. thanks.

[dread_head]

hey guys!

does anyone here offer a line 6 m9 firmware update?

please PM me...

thanks!

 

[Muzickero]

Buhayin ko ulit tong thread na to. Help po kasi bigla na lang nagloko yung m9 ko. Yung isang switch pumapalya. Minsan nag-eengage pero madalas hindi. Feeling ko baka nasobrahan  yata sa apak ko. Safe po ba ma ako magbukas nung unit para ayusin or better pagawa na lang sa pro

[Xelly]

Buhayin ko ulit tong thread na to. Help po kasi bigla na lang nagloko yung m9 ko. Yung isang switch pumapalya. Minsan nag-eengage pero madalas hindi. Feeling ko baka nasobrahan  yata sa apak ko. Safe po ba ma ako magbukas nung unit para ayusin or better pagawa na lang sa pro

Kung tapos na warranty bro, pagawa mo nalang. Try mo kay Yahoo! forumer din siya dito or kay mang Raul.

[JoeF]

Buhayin ko ulit tong thread na to. Help po kasi bigla na lang nagloko yung m9 ko. Yung isang switch pumapalya. Minsan nag-eengage pero madalas hindi. Feeling ko baka nasobrahan  yata sa apak ko. Safe po ba ma ako magbukas nung unit para ayusin or better pagawa na lang sa pro

Flimsy talaga yung stock switches. kung confident ka na buksan yung m9 mo madali lang yung fix jan. open mo yung m9 locate mo yung switch na sira. sa footswitch mismo may dalawang part: yung plastic na plunger (parang pako) at yung spring. pwede mo ibend slightly inward yung end nugng spring o gawin mo yung ginawa ko. nagapply ako onting adhesive paradi matanggal yung plunger. Pero long term i suggest na palitan mo nung self contained switches yung m9 mo parang yung sa mga diy tap tempo.

[Muzickero]

Flimsy talaga yung stock switches. kung confident ka na buksan yung m9 mo madali lang yung fix jan. open mo yung m9 locate mo yung switch na sira. sa footswitch mismo may dalawang part: yung plastic na plunger (parang pako) at yung spring. pwede mo ibend slightly inward yung end nugng spring o gawin mo yung ginawa ko. nagapply ako onting adhesive paradi matanggal yung plunger. Pero long term i suggest na palitan mo nung self contained switches yung m9 mo parang yung sa mga diy tap tempo.

Sir thanks sa advice. binuksan ko yung m9 and nakita ko yung sinasabi mo pero maganda naman yung kabit nung plunger sa spring for the switch na may problem ako. ang problem is yun mismong button na nakasolder sa board. i tried pressing it on and off, yun yung sometimes nageengage sometimes hindi.
may idea ba kayo kung san nakakabili ng replacement nun kasi kaya ko naman sya palitan di ko lang alam kung may mabibilhan ng replacement nun

[pao2pao16]

Nahirapan ako buksan m9 ko. Hanggang enclosure lang. Hindi ako makaabot sa foot switches

[rjthemute]

Sir thanks sa advice. binuksan ko yung m9 and nakita ko yung sinasabi mo pero maganda naman yung kabit nung plunger sa spring for the switch na may problem ako. ang problem is yun mismong button na nakasolder sa board. i tried pressing it on and off, yun yung sometimes nageengage sometimes hindi.
may idea ba kayo kung san nakakabili ng replacement nun kasi kaya ko naman sya palitan di ko lang alam kung may mabibilhan ng replacement nun

parang sinabi nga ni Joe, palitan mo nalang yung buong switch assembly (yung external swicth at yung pinipindot nyang button sa board) ng isang self contained switch. Kung kaparehas lang nito yung Line6 modelers, two solder points lang kelangan mo so pwede kang gumamit ng spst momentary switch na usually ginagamit sa tap tempo boxes. Like the ones available at epektos:



tapos i-hardwire mo yung switch to the board. Since papalitan mo yung isa, gawin mo na lahat

[Muzickero]

parang sinabi nga ni Joe, palitan mo nalang yung buong switch assembly (yung external swicth at yung pinipindot nyang button sa board) ng isang self contained switch. Kung kaparehas lang nito yung Line6 modelers, two solder points lang kelangan mo so pwede kang gumamit ng spst momentary switch na usually ginagamit sa tap tempo boxes. Like the ones available at epektos:



tapos i-hardwire mo yung switch to the board. Since papalitan mo yung isa, gawin mo na lahat

may nakapagpalit na ba dito ng footswitch ng m9/m13? Baka meron pix? Kasi yung nakita kosa youtube dl4 yung pinalitan nya ng footswitch pero mas madali kasi yun kaysa sa m9/m13 kasi wala sya nung part na umiilaw for the led

Btw gano katagal shipping from epektos

[rjthemute]

may pics ka ba ng loob ng m9/13? ano ba itsura nung switch/led assembly sa loob? is there no space for the above suggested spst switch (kahit tagilid)? Di ko pa nabuksan m9 ko e.

[JoeF]

may nakapagpalit na ba dito ng footswitch ng m9/m13? Baka meron pix? Kasi yung nakita kosa youtube dl4 yung pinalitan nya ng footswitch pero mas madali kasi yun kaysa sa m9/m13 kasi wala sya nung part na umiilaw for the led

Btw gano katagal shipping from epektos

may pics ka ba ng loob ng m9/13? ano ba itsura nung switch/led assembly sa loob? is there no space for the above suggested spst switch (kahit tagilid)? Di ko pa nabuksan m9 ko e.

Eto gutshots: http://freestompboxes.org/viewtopic.php?f=1&t=16728
gawa na lang kayo ng account para maview nyo.

napalitan na lahat ng switches ko nung self contained na spst. kasya naman sya. btw kung yung button mismo yung sira. palitan mo na lang lahat. sakit talaga yan nung line 6 switches.

[rjthemute]

Eto gutshots: http://freestompboxes.org/viewtopic.php?f=1&t=16728
gawa na lang kayo ng account para maview nyo.

napalitan na lahat ng switches ko nung self contained na spst. kasya naman sya. btw kung yung button mismo yung sira. palitan mo na lang lahat. sakit talaga yan nung line 6 switches.

so ayun, kasya yan. if anything, baka may konting improvising nalang na kelangan gawin sa chassis mismo, ganun din naman sa xx4 series e.

salamat sa link, pero di ko makita switches sa gutshots...baka may separate board parang sa interface.

again, kung switches lang, should be relatively similar to the xx4 series.

[JoeF]

so ayun, kasya yan. if anything, baka may konting improvising nalang na kelangan gawin sa chassis mismo, ganun din naman sa xx4 series e.

salamat sa link, pero di ko makita switches sa gutshots...baka may separate board parang sa interface.

again, kung switches lang, should be relatively similar to the xx4 series.

punta ka bahay check mo yung m9 ko.

[dyego_bedsheet]

mga sir,

gusto ko kasi bumili ng m13. palagay nyo worth it ba? kasi sa nabasa ko dito sa forum medyo nag 70-30 ako kung bibili pa ako.

[micr0chimp]

Selling a Boss FV500L.  It can be used as an expression pedal for the M9 or M13 as well as acting as a standard volume pedal. P4.5k.

http://talk.philmusic.com/index.php?topic=276347.0

[masterjeremiah14]

i got an M9,.. then have it modded to have an external tap tempo connecting at expression pedal 1,..

my problem now is,..

i cannot go to the looper mode whenever i use the original AC adapter of it,,.

but whenever i use a 1spot adapter w/c is 9v DC(imo might fry my M9),. the M9 works perfectly,.. i can use the external tap tempo,.. and also use it to go to the looper mode,..

anyone who uses 1 spot to power your m9???

right now i'm powering a J&H, Liverpool & line6 M9,.. no problem for now.,,
i'm worried that 1spot might cause a damage on my M9 in the long run,..
but i can't explain why m9 works perfectly to 1 spot, instead of it's own adapter that comes with it,..

i'm thinking there is wrong in the mod,...

[Mazterjedi]

anyone updating m13?

[Gi0527]

Does anyone know the retailer/distributor ng Line6? I need a PSU for my Line6 Floor POD.  2000ma.

[pao2pao16]

^^
Yupangco group sir. Specifically Perfect Pitch

[kevinmax]

i got an M9,.. then have it modded to have an external tap tempo connecting at expression pedal 1,..

my problem now is,..

i cannot go to the looper mode whenever i use the original AC adapter of it,,.

but whenever i use a 1spot adapter w/c is 9v DC(imo might fry my M9),. the M9 works perfectly,.. i can use the external tap tempo,.. and also use it to go to the looper mode,..

anyone who uses 1 spot to power your m9???

right now i'm powering a J&H, Liverpool & line6 M9,.. no problem for now.,,
i'm worried that 1spot might cause a damage on my M9 in the long run,..
but i can't explain why m9 works perfectly to 1 spot, instead of it's own adapter that comes with it,..

i'm thinking there is wrong in the mod,...

Ako sir gumagamit ako ng m9 na hindi original adapter from line 6. Im using powerall. Sakto po kasi sa power requirements ng m9 ung powerall, 2A kasi po ung powerall. Have been using it for a year na sir wala man ako naging problem. Wag lang po siguro isasaksak ung ibang pedal kasama nung m9 sa isang power adapter kasi nung nag try po ako to lessen ung mga isasaksak e may naging noise na sya. Bka lang po kasi maka cause ng sira sa unit.

Anyway sir. Any chance po na malaman kung saan po kau nagpa mod ng m9 nyo? Sira na po kasi mga switches ng unit ko and gusto ko sna ipa mod na din. Thanks"