Sa wakas mapapakita ko na rin sa inyo ang 2x12 cab na ipinagawa ko kay Sir George Siochi. Yesterday ko (08/14/10) na nakuha ung inorder ko na Marshall genuine corners kay Sherwin (aka spankyrigor). Then I went straight to Sir George's house to install it. I'm very happy with the outcome.
I asked Sir George to take pictures along the process of building the cab so that anyone who would like to have his cab built by him will be confident that it will be professionally done.
Here is the contact numbers of Sir George Siochi.
mobile: 09174497172
landline: 8216793
By the way, the cab is loaded with 2 Celestion G12T-75. It can used in mono (8 ohms) or stereo (16 ohms) with the use of special cables that Sir George built. He used Neutrik speak-on jack and high quality cables and plugs.
I have a lot to say and am very excited but I don't want to bore you so here are the pics and ENJOY.
Finger joints
Recessed routing for the side handles
Glueing the wooden braces
Almost there...
Routing the radius sides
Sanding
Spray painting the inside of the cab...
the baffle
Sir George himself putting glues to the cab
Preparing the tolex for glueing
Glueing the tolex
Cutting the excess.
After the tolexing..
Stapling the tolex to the back cover.
Stapling the tolex to the cab.
Stapling the grill cloth to the baffle.
Stapled grill cloth.
Installing the corners. (Screws are stainless so no rusting)
Polishing the surface
Finished project
Front
Side view (Take note: side handles are metals not like the usual plastic handles and are recessed)
Back (cab can be open or closed-back)
Casters with lock
The SIOCHI logo.
Close up of the grill cloth, white piping and a corner.
The cables (one for mono operation and the other one for stereo).
YAHUUU!!!! RAK EN ROL NA!!!
More angled pics.