hulika
« previous next »
Pages: [1]   Go Down

Author Topic: LaceSensor pot values?  (Read 1402 times)

Offline sonnyrayvaughn

  • Philmusicus Addictus
  • *****
LaceSensor pot values?
« on: July 22, 2006, 07:24:49 PM »
sensya na tinatamad ako research sa google hehe.
me nakakaalam ba kung ano ang recommended pot values ng lace sensor(Red, Silver,Blue)?  I am using 250's  right now, pero parang napababa ng output and the volume is only 0 and 10...di gradual ang increase ng volume.

any ideas?
salamat ulit.
Logged

Offline stratman1

  • Philmusicus Addictus
  • *****
LaceSensor pot values?
« Reply #1 on: July 22, 2006, 11:08:04 PM »
As I recall yong strat ko ang vol is 500 and tone are 250 each. Medyo matagal na since gitar kalikot pero ganun ata ang values ng MARIJUANA... ehe!... I mean POT, hehe :shock:  :twisted:  :mrgreen:  :lol:
Logged

Offline micsis

  • Veteran Member
  • ****
LaceSensor pot values?
« Reply #2 on: July 22, 2006, 11:58:32 PM »
SRV.

250k pots yung nasa strat ko na gold lace sensors and its working fine. Baka naman u just need to replace the pot with a new one.  :) Pag nag 500k pot ka bka lalung maging abrupt ang trim ng volume, and you might get a brighter than normal sound.
Logged
I'm standing on a ROCK and my name is on the ROLL

Offline greasykid

  • Philmusicus Addictus
  • *****
LaceSensor pot values?
« Reply #3 on: July 23, 2006, 12:45:13 AM »
250k yung recommended pot values ng Lace Sensor.  Kung hindi gradual yung increase, palitan mo ng logarithmic pot.  Tawag ng iba diyan audio taper pot.  Yung human perception sa level ng sound parang linear pero logarithmic talaga.
Logged

Offline stratman1

  • Philmusicus Addictus
  • *****
LaceSensor pot values?
« Reply #4 on: July 23, 2006, 12:49:28 AM »
Sindihan at hithitin mo na lang yong POT :shock:  :lol:  Ehe!!! :lol:

Jowk!

Ala bang remedyo na pede mong lagyan ng resistors/transistors/ o ano mang eletronic parts na nag tatapos sa "TORS" para ma control mo ang volume?
Logged

Offline greasykid

  • Philmusicus Addictus
  • *****
LaceSensor pot values?
« Reply #5 on: July 23, 2006, 01:01:28 AM »
Naubos ko na yan e, wala na tayong sisindihan.  :wink:

Pwede mong lagyan ng resistor between sa dalawang paa nung pot na nakakabit sa output jack at ground.  Mga 3.3kohm na resistor pwede na siguro.  Try mo!
Logged

Offline sonnyrayvaughn

  • Philmusicus Addictus
  • *****
LaceSensor pot values?
« Reply #6 on: July 24, 2006, 05:13:47 AM »
Quote from: greasykid
Naubos ko na yan e, wala na tayong sisindihan.  :wink:

Pwede mong lagyan ng resistor between sa dalawang paa nung pot na nakakabit sa output jack at ground.  Mga 3.3kohm na resistor pwede na siguro.  Try mo!


thanks sa advice...i heard lang kasi na pag 500k maoopen daw talaga..250ohms ang nakakabit now...

Dan, gusto mo ng POT? lika dito dalaw ka! sagot ko pati entrance mo sa Casa Rosso( ano yun? i-google mo na lang hehe)...

salamat uli try ko yung resistor.
Logged
Pages: [1]   Go Up
« previous next »