hulika

Author Topic: Tanong lang po!  (Read 670 times)

Offline .bong.

  • Philmusicus Addictus
  • *****
Tanong lang po!
« on: July 23, 2006, 09:19:31 PM »
Yung isa kong guitar, pag nag tune ako ng (open) EADGBE sa tuner, ok sya..pero pag fret ko ung G (3rd fret- E string) C (3rd fret- A string), F (3rd fret- D string) medyo MATAAS ang tono!  

Pero yung GBE strings ok naman pag fret sa 3rd...

Normal lang ba ito?


.bong.

Offline mahavishnu

  • Philmusicus Addictus
  • *****
Tanong lang po!
« Reply #1 on: July 23, 2006, 09:34:01 PM »
intonation. adjust your saddles bro according to your guitar's length and gauges of the string.

Quote

Intonation (Roughing it out)

You can pre-set the basic intonation of your guitar, by taking your tape measure and measuring from the inside of the nut to the center of the 12th fret (the wire, not the fingerboard). Double that measurement to find the scale length of your guitar. Adjust the 1st string bridge saddle to this scale length, measuring from the inside of the nut to the center of the bridge saddle. Now, adjust the distance of the 2nd string saddle back from the 1st saddle, using the gauge of the 2nd string as a measurement (Example: If the 2nd string is .011" (0.3 mm) you would move the 2nd string back .011" (0.3 mm) from the 1st saddle). Move the 3rd back from the 2nd saddle, using the gauge of the 3rd string as a measurement. The 4th string saddle should be set parallel with the 2nd string saddle. Proceed with the 5th and 6th in the same method used for strings 2, and 3.

Offline .bong.

  • Philmusicus Addictus
  • *****
Tanong lang po!
« Reply #2 on: July 23, 2006, 09:42:12 PM »
hehe..Thanks po sir... :D

Hindi naman siguro fret spacing ito noh? Kasi ung ibang strings ok naman eh...(Tama ba?)

Thanks ulit!  :D
.bong.

Offline mahavishnu

  • Philmusicus Addictus
  • *****
Tanong lang po!
« Reply #3 on: July 25, 2006, 12:06:15 AM »
baka din fret spacing.. madaming local na gitara na sablay ang spacing.. minsan mas malaki yung space nung mataas na fret sa mababa (e..g.  fret 17 is wider than fret 16).. kung ganon ang problema.. fret board ang palit. d pde na refret kase nalagyan na ng slots yan board.

IMHO