Author Topic: MICSIS GUITAR SPOT BY MIKE SISON (Read 621616 times)

jgmredor · « **Reply #3100 on:** February 01, 2016, 10:26:32 AM »

Thanks Ryn and Sargento!

Kudos goes to Team Micsis. Hehe they did all the hard work.

Because they did such a good job, 1 last custom to make it 3! Haha!

lolwat · « **Reply #3101 on:** February 04, 2016, 02:05:53 AM »

Would anyone know what species of pine Micsis uses for his builds?

cacophony · « **Reply #3102 on:** February 04, 2016, 03:48:52 AM »

Just picked up my strat. As always fantastic paint job on the Musikraft neck by Micsis team. The abalone inlays, ferrules and bridge were set perfectly. Not to mention the shielding paint and drill job.

...and now on to electronics

spoonbender · « **Reply #3103 on:** February 05, 2016, 08:40:12 AM »

Perf De Castro - MicSis Interview Part 1: Getting to know Mike Sison

Perf De Castro - MicSis Interview Part 2: Making of the new PDC Custom

Freak · « **Reply #3104 on:** February 05, 2016, 12:43:48 PM »

^ Nice

When was this shooted?

vash1968 · « **Reply #3105 on:** February 23, 2016, 09:58:26 PM »

Mga sir ano pinakamabilis na sasakyan papunta kila sir mike? galing pasay rotonda?

esteban4377 · « **Reply #3106 on:** February 29, 2016, 07:47:23 PM »

Bro, from pasay pwede ka sakay sa mall of asia or pasay rotonda sakay ka sucat expressway, baba ka sucat then sakay ka mga jeep na pa baclaran then after makikita mo SM bf paranaque straight pa from your right may makikita ka green hights village na may ministop ata na convinient store doon hayun baba ka or sabihin mo lang sa jeep na greenhights village, then pagbaba diretso ka lang lakad or kung may makita ka tryc special sakay ka diretso lang pag nakita mo sa right mo yung building na orange na aprtment hayun na bahay ni sir Micsis.

hope this help.

micsis · « **Reply #3107 on:** March 11, 2016, 08:04:38 AM »

Matagal tagal narin since I last visited PhilMusic and this thread. Its good to know somehow active pa rin itong thread. Been so busy the past months. Thanks to everyone na nagpopost. God Bless Us All !!

esteban4377 · « **Reply #3108 on:** March 14, 2016, 07:30:35 PM »

Quote from: micsis on March 11, 2016, 08:04:38 AM

Matagal tagal narin since I last visited PhilMusic and this thread. Its good to know somehow active pa rin itong thread. Been so busy the past months. Thanks to everyone na nagpopost. God Bless Us All !!

Sir Mike kamusta ? hope you remember me..si mike din ito ng victor fort, before nag papaayos din ako sa yo remember yung tokai na purple?..hehe anyway, sa vacation daan ako sa inyo mag papalit ako ng pick i have Ephiphone .. ano ba ma suggest nyo na pick up ? salamat bro. More power!

esteban4377 · « **Reply #3109 on:** March 14, 2016, 07:32:18 PM »

Quote from: micsis on March 11, 2016, 08:04:38 AM

Matagal tagal narin since I last visited PhilMusic and this thread. Its good to know somehow active pa rin itong thread. Been so busy the past months. Thanks to everyone na nagpopost. God Bless Us All !!

chazkidlat · « **Reply #3110 on:** March 16, 2016, 09:26:55 PM »

Magkano kaya magpagawa ng Telecaster neck replacement? AVRI 62 Telecaster
Maple, rosewood board.

thanks a lot guys!

cacophony · « **Reply #3111 on:** March 16, 2016, 11:42:03 PM »

Quote from: chazkidlat on March 16, 2016, 09:26:55 PM

Magkano kaya magpagawa ng Telecaster neck replacement? AVRI 62 Telecaster
Maple, rosewood board.

thanks a lot guys!

Last quote on mine was 8k

chazkidlat · « **Reply #3112 on:** March 17, 2016, 01:41:09 PM »

Quote from: cacophony on March 16, 2016, 11:42:03 PM

Last quote on mine was 8k

Thanks Thanks Thanks

so Isang buong ES 335 na copy around 30k?

jgmredor · « **Reply #3113 on:** March 26, 2016, 09:58:57 AM »

Custom 1 (Tele) and 2 (Suhr Modern) still thinking about what should be #3

juwanfidle09 · « **Reply #3114 on:** March 28, 2016, 03:25:07 AM »

Quote from: jgmredor on March 26, 2016, 09:58:57 AM

Custom 1 (Tele) and 2 (Suhr Modern) still thinking about what should be #3

ganda!

napapaisip ako magpaggawa ng bagong neck kay Sir Mike or nipisan ng konti. (getting old problems)

tsunamic · « **Reply #3115 on:** March 30, 2016, 10:51:19 AM »

Quote from: chazkidlat on March 17, 2016, 01:41:09 PM

Thanks Thanks Thanks

so Isang buong ES 335 na copy around 30k?

siguro 18k e Wood, truss rod and frets. bring him your electronics/hardware.

say you spend 5k ony pickups, 5k on tuners and bridge. and 2k on pots/wires/knobs/caps etc.

yeah, 30k would be okay.

Freak · « **Reply #3116 on:** March 31, 2016, 08:06:03 AM »

Thinking of going back for a setup...

cacophony · « **Reply #3117 on:** April 25, 2016, 02:47:33 PM »

NGD! Fantastic job by Micsis' team once again!

Body -
KNE 2 pc Alder DNK
EMG 85 (bridge)
EMG SA (neck)
Stewmac pup rings
CTS 25k pots
Switchcraft stereo jack
Electrosocket jack
ESP neck plate
CRL 3 way switch
Tonepros TOM bridge
Gotoh rear and top string ferrules
Dunlop dual design strap buttons

Neck -
Musikraft 2 pc maple reverse CBS
Threaded steel inserts at neck joint
Abalone inlays
Bone nut
Hipshot staggered tuners
Scale: 25.5 Standard Fender
Nut Width: 1.650 (41.91mm)
Heel Width: 2-3/16 (55.56mm) Standard Fender
Tuner Holes: 10 MM (Sperzel/Gotoh/Schaller)
Truss Rod: Dual Acting Adjust @ Heel
FB Radius: 12
12th Dots: Narrow - Post '64
Side Dots: Black 2mm
Fret Wire: Jumbo 6100 Nickel Silver
Back Profile: Charvel Pro Mod .79-.85

jgmredor · « **Reply #3118 on:** April 26, 2016, 07:00:39 PM »

^ guitar stood out sa mga nakahanger so held it. Ganda!

cacophony · « **Reply #3119 on:** April 26, 2016, 08:07:59 PM »

Quote from: jgmredor on April 26, 2016, 07:00:39 PM

^ guitar stood out sa mga nakahanger so held it. Ganda!

Thanks bro! This is going to be my main workhorse now. Although sa clean I find it lacking in terms of the glassy tone I find in passive pups. Nevertheless still quiet as ever. Sana naabutan ko rin yung Suhr mo!

Extremist777 · « **Reply #3120 on:** May 21, 2016, 09:06:26 PM »

New MicSis client here. Brought my two guitars...one project pinas LTD for electronics and setup work.... and the other Jackson DKMG to be refinished in Iguana Burst ..very curious how it will turn out.

Mike is a very nice guy pati na yung dalawang kasama nya sa shop.

Freak · « **Reply #3121 on:** May 23, 2016, 11:19:59 AM »

Damn the traffic nowadays in sucat due to maynilad works

vantonilin · « **Reply #3122 on:** May 27, 2016, 10:43:05 PM »

Finally got the guts and chance to visit MICSIS early this week. I have an old guitar that needed an overhaul. I thought I would have to visit many shops to have everything done. One visit was all it took to have the guitar back in action. Sir Mike hooked me up with a new tuneOmatic bridge and a tail piece, new set of pots, and a set of burst buckers! Super sulit young visit ko. Overall, it was a good experience and I expect to visit the shop more rather than DIY my gears and more often than not, make things worse.

Ace Of Spades · « **Reply #3123 on:** June 06, 2016, 11:30:13 AM »

tagal ko ng gustong pumunta dito para pa restore ung bass ko. from sucat exit right side ung green heights village dba? ano mga landmarks doon? not sure if tama ung sa map. makalagpas lang ng unihealth and puregold malapit na? then pag nakapasok nasa village derecho lang sa greenheights ave? mga pang ilang kanto kaya ung apartment nya hehe salamat bukas din ba pag weekends?

vantonilin · « **Reply #3124 on:** June 06, 2016, 12:38:33 PM »

Pag nasa Greenheights ave ka na sir derecho ka lang. Nowadays, may malaking road works na ginagawa sa Greenheights ave. after nun abang na kayo sa right side niyo sir.

News:

Author Topic: MICSIS GUITAR SPOT BY MIKE SISON (Read 621616 times)