if you want to series two transformer make sure they are same as in same lahat ng specs para pantay ang labas ng volt
it is clearly shown by the TS that the amps are not of the same model, which means that the traffos do not have the same specs and yet you suggested the series connection. tsk, tsk, tsk... by the way, it is ok to connect in series TWO EQUAL WINDINGS for a certain voltage to make it work for twice the voltage, provided they are in the same core and proper phasing is observed.. but for two separate transformers feeding DIFFERENT load/circuit, not recommended for safety's sake.
if you want check ninyo ang multi taping nang ibang transformer minsan may dalawang 110v ang provide ng factory pag 110v parallel lang pag 220V naka series yung dalawang 110V.
no argument here,this is completely proper. as stated above, the two 110V windings are on the same core.
same lang yan kahit dalawang seperate transformer ganoon din.
nope, it is NOT the same.
hindi ako mag advice sa inyo kung hindi ako siguro o hindi ko pa nasubukan ito .
yeah right..
did you connect in series two transformers inside one amp? or did you connect two 110V amplifiers in series via their power plugs?
kaya ko share sa inyo para din kayo makatipid kung bilili ka nang avr sa ngayon 15kv 20t kulang pa.
yeah, the TS has 6 original (not clone) crown amps. that 20k is just a very small fraction of the cost of the amps that will go up in smokes if they follow your suggestion.
yong nasa picture colne nang crown bz3600.
that's two transformers inside ONE amp. totally different scenario. clearly, you do not understand the possible consequences of your suggestion. yung pinapakita mong example, iisang amp yan hindi multiple amps in series.