hulika

Author Topic: Modifying bass pedals  (Read 6896 times)

Offline vhinming

  • Philmusicus Addictus
  • *****
Re: Modifying bass pedals
« Reply #25 on: August 01, 2013, 06:11:12 PM »
ayos ka talaga sir vhinming, napaka creative mo hahaha  :)

haha sa madaling salita po , basurerong drummer lng po ako hehe  :mrgreen:
Only One Life so Soon it will Pass,Only Whats Done For Christ Will Last.

Drum Items? :wink: Click Here!

Offline cokeandjahsmoke

  • Philmusicus Noobitus
  • *
Re: Modifying bass pedals
« Reply #26 on: August 03, 2013, 10:15:36 PM »
haha sa madaling salita po , basurerong drummer lng po ako hehe  :mrgreen:

+100 yan... ugali na din kasi natin yang mga pinoy eh na mag MOD... cheaper way but still functional pa din...   :-D sana gawa ka din videos ng pag mod mo :) just a suggestion lng po..
for my reference: yearling, rubbershoes, chadrhix

Offline Peter

  • Regular Member
  • ***
Re: Modifying bass pedals
« Reply #27 on: November 01, 2013, 06:43:36 AM »
Naka wire base single ako ngayon. sabi nila mas stable daw ang base plate. Balak ko imodify para maging base plate. may binebenta bang base plate for tama HP10? wala ako makita online so far. tinitignan ko rin DIY options using alloy scraps.
The same thing sa cam at chain holder sa foot board. Meron bang nabibili to convert from single chain to double chain? any suggestions po.

Offline Peter

  • Regular Member
  • ***
Re: Modifying bass pedals
« Reply #28 on: November 27, 2013, 06:45:27 AM »
wire base to base plate conversion project ongoing.


Offline Peter

  • Regular Member
  • ***
Re: Modifying bass pedals
« Reply #29 on: December 05, 2013, 06:43:24 PM »
walang magawa during restday. share ko lang ginawa ko sa single chain pedal ko. pinalitan ko yung chain ng steel wire cable. di ko sure kung pwede Ko na din consider na direct drive conversion to. di pa ako nakagamit ng totoong direct drive. kaya di ko alam kung ano feel ng direct drive. ang naobserve ko lang after ko palitan very synchronize na movement ng board at beater.
total modification cost: P32




Offline kimpoy19

  • Forum Fanatic
  • ****
Re: Modifying bass pedals
« Reply #30 on: December 05, 2013, 07:54:13 PM »
walang magawa during restday. share ko lang ginawa ko sa single chain pedal ko. pinalitan ko yung chain ng steel wire cable. di ko sure kung pwede Ko na din consider na direct drive conversion to. di pa ako nakagamit ng totoong direct drive. kaya di ko alam kung ano feel ng direct drive. ang naobserve ko lang after ko palitan very synchronize na movement ng board at beater.
total modification cost: P32




kamusta po ang response sir? :)
drumming is my greatest way to praise the Lord!

Offline Peter

  • Regular Member
  • ***
Re: Modifying bass pedals
« Reply #31 on: December 05, 2013, 10:32:17 PM »
kamusta po ang response sir? :)

laki ng ginanda ng response nya sir. nawala na yung nakakatriplets na apak kn sa board pero doubles lang sa beater side dahil minsan nagfofold lang yung chain. personal observation ko lang sa chain drive kaya ko naisip subukan imodify ng ganito. masaya  naman ako sa result.

Offline Riff_6603

  • Philmusicus Moderatus
  • Prime Moderator
  • *****
Re: Modifying bass pedals
« Reply #32 on: December 06, 2013, 09:08:00 AM »
walang magawa during restday. share ko lang ginawa ko sa single chain pedal ko. pinalitan ko yung chain ng steel wire cable. di ko sure kung pwede Ko na din consider na direct drive conversion to. di pa ako nakagamit ng totoong direct drive. kaya di ko alam kung ano feel ng direct drive. ang naobserve ko lang after ko palitan very synchronize na movement ng board at beater.
total modification cost: P32



kamusta po ang response sir? :)

Parang strap drive na bakal yung labas niya. SFTW! :mrgreen:

Response would be closest to strap drives, if not better since mas matigas yung material vs normal straps (kevlar et al). Care to share pano mo nagawa? Interesado akong gayahin yung mod mo, meron pa akong mga pearl peds dito na naitabi, pwede pag-experimentuhan. :drool:

Offline Peter

  • Regular Member
  • ***
Re: Modifying bass pedals
« Reply #33 on: December 06, 2013, 12:26:55 PM »
Parang strap drive na bakal yung labas niya. SFTW! :mrgreen:

Response would be closest to strap drives, if not better since mas matigas yung material vs normal straps (kevlar et al). Care to share pano mo nagawa? Interesado akong gayahin yung mod mo, meron pa akong mga pearl peds dito na naitabi, pwede pag-experimentuhan. :drool:

sir,  eto lang ginawa ko.
1. Nagcut ako ng dalawang cable wire. same length ng chain ko.
2. kinabit ko sila sa chain holder. (luckily perfectly fitted sa parang molding para sa chain.
3. nagcustomized nalang ako ng washer para may kapit. yung screw na din ng chain ginamit ko panglock.
So parang as simple as pinalitan ko lang yung chain. wala akong pinutol or binutasan sa pedal ko. incase ayaw ko na or di ko nagustuhan pwede ko lang ibalik yung chain na parang walang nangyari.












Offline Riff_6603

  • Philmusicus Moderatus
  • Prime Moderator
  • *****
Re: Modifying bass pedals
« Reply #34 on: December 06, 2013, 12:58:02 PM »
sir,  eto lang ginawa ko.
1. Nagcut ako ng dalawang cable wire. same length ng chain ko.
2. kinabit ko sila sa chain holder. (luckily perfectly fitted sa parang molding para sa chain.
3. nagcustomized nalang ako ng washer para may kapit. yung screw na din ng chain ginamit ko panglock.
So parang as simple as pinalitan ko lang yung chain. wala akong pinutol or binutasan sa pedal ko. incase ayaw ko na or di ko nagustuhan pwede ko lang ibalik yung chain na parang walang nangyari.

very nice! :razz:


May specific gauge ba yung cable wire na ginamit mo? saan mo nabili at paano mo pinaputulan yun? Based sa setup niyan, lalabas na dual strap/wire yung meron ka, so response-wise panalo talaga. Mukhang busy ako this weekend neto! :-P

Offline Peter

  • Regular Member
  • ***
Re: Modifying bass pedals
« Reply #35 on: December 06, 2013, 03:43:15 PM »
kasing kapal lang yata to ng standard cable Lock ng laptop. or mas makapal lang ng konti.
naging problem ko actually pagputol kasi di kaya ng plier. tyinaga ko nalang putulin gamit chopping knife habangpupok ko ng martilyo.
kunin mo nalang sa desired length mo. para paputol mo na sa bibilhan mo.
sa handyman ko nabili 16/ft. shielded yung kinuha ko.
« Last Edit: December 10, 2013, 08:37:19 AM by Peter »