Author Topic: Drum Wraps and Finishes thread (Read 127164 times)

g0d5_g1ft · « **Reply #550 on:** May 08, 2011, 09:30:05 PM »

allan, yep kay vinci ko nakuha hehehe

musta paps? san kayo natugtog ngayon?

royalletones · « **Reply #551 on:** May 12, 2011, 09:39:33 AM »

@arwingn - ano sir link? thanks nice kit.

omitot · « **Reply #552 on:** May 13, 2011, 10:22:34 PM »

meron ba dito service na nagpapalit ng drum wraps?kumbaga bayaran nalanag para gawin lahat hehe

g0d5_g1ft · « **Reply #553 on:** June 02, 2011, 12:07:30 PM »

Update, here it is with the hardware to be used:

g0d5_g1ft · « **Reply #554 on:** June 04, 2011, 02:17:02 PM »

update ulit...

and the finished product:

shell courtesy of vinci, bearing edges and drilling by the master peeves24 himself.

Keller Maple 12ply 13x6.5 shell
brass lugs, strainer, butt, snare wire from AM Drum parts
brass hoops from vinci
Remo Emperor X batter
Remo Ambassador Hazy Reso.

Finish by yours truly.

drummerspoundharder · « **Reply #555 on:** June 04, 2011, 03:13:35 PM »

Quote from: g0d5_g1ft on June 04, 2011, 02:17:02 PM

update ulit...

and the finished product:

shell courtesy of vinci, bearing edges and drilling by the master peeves24 himself.

Keller Maple 12ply 13x6.5 shell
brass lugs, strainer, butt, snare wire from AM Drum parts
brass hoops from vinci
Remo Emperor X batter
Remo Ambassador Hazy Reso.

Finish by yours truly.

wow galing!hindi niyo nilagyan ng snare bed sir?

g0d5_g1ft · « **Reply #556 on:** June 04, 2011, 03:19:10 PM »

merong snare bed yan sir

numenorboy · « **Reply #557 on:** June 13, 2011, 10:19:00 PM »

Up for this thread

) i dunno kung tamang dito ko to ilagay. I'm planning to make an acrylic snare drum

I will go to MAC next week, to start with. Before I go there, what should I tell those people in MAC? I'm planning to build a 14x6.5 snare drum. I've got the hardwares and stuff. I need now the shell.

are there some things i should tell those people who will make the acrylic shell?
how thick? are there issues with the diameter of the snare? hmmm questions that need answers

paging the experts!

THANKS!

g0d5_g1ft · « **Reply #558 on:** June 14, 2011, 09:20:57 AM »

for your thickness, anywhere between 1/4-1/2 inch if they have any thinner than that nakakatakot na baka mabasag lang agad. outer diameter of the shell should be as close to 14inches as possible.

kapag may shell ka na, pagawan mo na ng snare bed, bearing edges etc, hindi ginagawa ng MAC ito.

Bro pasabay naman patanong ng 6inch outer diameter na shell if magpunta ka

numenorboy · « **Reply #559 on:** June 14, 2011, 06:45:53 PM »

the outer diameter should be "as close" lang? or pwedeng 14" na talaga?

sige, tanong ko pag nagawi ako agad

THANKS!

g0d5_g1ft · « **Reply #560 on:** June 14, 2011, 08:08:18 PM »

Quote from: numenorboy on June 14, 2011, 06:45:53 PM

the outer diameter should be "as close" lang? or pwedeng 14" na talaga?

sige, tanong ko pag nagawi ako agad THANKS!

usually mejo maliit cya sa size, yung 14" is actually 13 15/16 kung di ako nagkakamali sir.

skunkyfunk · « **Reply #561 on:** March 10, 2012, 02:14:04 PM »

Will it be advisable to re-chrome an old Chrome over Brass type of snare with a bit of rust? I wonder how the shells would alter in sound in the process. Thanks.

byako21 · « **Reply #562 on:** March 10, 2012, 02:53:01 PM »

sir yung tama metal works 12x4 snare ko is still in the shop for nickel coating.
shell, rims, lugs at yung mechanism ng throw off ang pina coat ko.

sabi nila remove muna nila ang black nickel coating ng hardware tapos treat for anti rust tapos nickel coat. may 1 week na andun. post ko pics ng before and after nya pag ka kuha ko.

peeves24 · « **Reply #563 on:** March 10, 2012, 04:07:52 PM »

dodj pa sandblast mo muna bago mo pa rechrome para pantay. magkakaron kasi ng pits kapag basta mo na lang pina chrome ulit

brokensticks · « **Reply #564 on:** March 12, 2012, 10:37:17 AM »

Quote from: byako21 on March 10, 2012, 02:53:01 PM

sir yung tama metal works 12x4 snare ko is still in the shop for nickel coating.
shell, rims, lugs at yung mechanism ng throw off ang pina coat ko.

sabi nila remove muna nila ang black nickel coating ng hardware tapos treat for anti rust tapos nickel coat. may 1 week na andun. post ko pics ng before and after nya pag ka kuha ko.

sir, chroming ba to? magkano aabutin ang ten lugs, hoops and tension rods? currently black chrome sila gusto ko gawing chrome lang.

Thanks!

skunkyfunk · « **Reply #565 on:** March 12, 2012, 01:26:34 PM »

Quote from: peeves24 on March 10, 2012, 04:07:52 PM

dodj pa sandblast mo muna bago mo pa rechrome para pantay. magkakaron kasi ng pits kapag basta mo na lang pina chrome ulit

Dude manual ba dapat ito ginagawa? I have an orbital sander but I wonder how it should be done.

greasykid · « **Reply #566 on:** March 12, 2012, 04:57:13 PM »

Quote from: skunkyfunk on March 12, 2012, 01:26:34 PM

Dude manual ba dapat ito ginagawa? I have an orbital sander but I wonder how it should be done.

Sandblasting are done in specialty shops. They blast sand with compressed air para mas pantay yung removal ng top layer and to get to where sandpaper cannot.

Don't know where you can find one in the Philippines. Car restoration shops, perhaps?

byako21 · « **Reply #567 on:** March 12, 2012, 07:06:23 PM »

Quote from: brokensticks on March 12, 2012, 10:37:17 AM

sir, chroming ba to? magkano aabutin ang ten lugs, hoops and tension rods? currently black chrome sila gusto ko gawing chrome lang.

Thanks!

depende kasi sa size ng shell. mirror like finish ang chrome nila dun... sa Chrome Dazzler ko dinala ang shell,lugs at rims. trusted na sila pag dating sa chroming, nickel at brass plating. wala nga lang silang brass plating services ngayon. kung standard size siguro ang shell mo which is 14x5 more than 2k siguro abutin nun for the shell rims and lugs

technical1 · « **Reply #568 on:** March 13, 2012, 12:01:43 PM »

sir byako update mo kami ha hehe

meron din kasi ako 14"x6" na steel shell galing sa Pearl Forum ganyan din sana balak ko

thanks

peeves24 · « **Reply #569 on:** March 13, 2012, 08:00:23 PM »

sandblast mura lang sa republic powder coating - sucat branch sure ako meron. parang 50 to 100 lang yung shell mo dodj

pwede ka rin mag pasandblast ng cymbal dun hehehe

SuperCollider · « **Reply #570 on:** March 16, 2012, 12:29:10 PM »

kaya ba ng sandblasting yung mga umitim na cymbals na hindi na kaya ng polishing?
pati maiitim na brass snare shells?
thanks.

maganda ito. may ipapa-chrome din ako na steel shell.

technical1 · « **Reply #571 on:** March 17, 2012, 12:42:15 PM »

mga sir meron po ba kayo alam na nag offer ng sandblasting within Caloocan area ? yung luma ko kasing steel snare balak ko irevive hehe

skunkyfunk · « **Reply #572 on:** March 17, 2012, 09:21:23 PM »

Quote from: peeves24 on March 13, 2012, 08:00:23 PM

sandblast mura lang sa republic powder coating - sucat branch sure ako meron. parang 50 to 100 lang yung shell mo dodj

pwede ka rin mag pasandblast ng cymbal dun hehehe

Salamat drum guru! Gumagawa ka pa ba ng custom-drums?

byako21 · « **Reply #573 on:** March 20, 2012, 06:31:48 PM »

got the snare!! panalo sa kinis at kintab. pati lugs hanep sa kinis at kintab. nahirapan lang ako ibalik ang components ng throw off kasi yung mga butas nya sumikip gawa ng coating nya. i'll post pics here mamaya ng before and after nya.

technical1 · « **Reply #574 on:** March 20, 2012, 07:18:42 PM »

excited na ako sa pics ng snare mo byako!!!

News:

Author Topic: Drum Wraps and Finishes thread (Read 127164 times)