DIY boutique amps, pedals, mod kits, proto-type circuits, etc - Post them here!

[turiguiliano]

ok bro contact kita agad hiramin mo yung openhaus ni leech o meron kana din nung orig

Gone. My other friend has one. My pedals are arriving sometime this year.

[plugzzzz]

Gone. My other friend has one. My pedals are arriving sometime this year.

what do you mean gone binenta na ni leech yung openhaus nya why???...cgru na realized nya he doesnt need it kasi me bogner amp siya hehehe
planning on buying the realthing pero haba ng waiting list tsaka baka next year me lumabas na mas maluffet kaya never ending ang GAS

[wiccan8888]

for 3pdt needs, check my sig.

[paparoni]

my own tubescreamer clone, freshly made:

                             

[siore]

Nice layouts bro!  Iba talaga pag sariling gawa.  Parang mas tipid sa space yung sayo.  

[djonathan]

alexan or deeco... sa mga electronics shop.. kung sa manila ka based swerte ka. ako pampanga medyo mahirap ung mga opamps and transistor.

meron online store naman tulad ng e-gizmo and futurelec..

taga isabela ako bro...ang alexan ba ng door to door sila ng mga products..parang gusto ko muna itry ung mga kits nila for practice

[quaternotetriplet]

taga isabela ako bro...ang alexan ba ng door to door sila ng mga products..parang gusto ko muna itry ung mga kits nila for practice

http://e-gizmo.com/

[kawayan_strat]

my own tubescreamer clone, freshly made:

                             

What,no batteries?

[paparoni]

What,no batteries?

yep.
batteries are harmful to environment.
hehe.

[neil_squadron]

ask ko lng po sana sa mga gumagamit ng eagle cadsoft..

kung pano isave yung pcb layout without the components.
yung blank lng na pcb na ginawa sa eagle cad..

i'm really having a hard time following the tutorial.
yun ba yung "CAM PROCESSOR"..hind ko kc masundan.


medyo nakakalito kc yung mga terms..

looking forwards..tnx

[colorless krayola]

gusto ko din mag DIY kaso mahirap maghanap ng components,lalo na yun o-order pa sa malayong lugar...
sana yun mga nagdi-DIY magbenta na rin ng KITs na kumpleto na talaga...   

[pie-key]

next project.....

MARSHALL MG50 guitar amp clone
the schematic was taken from google search.... and redrawn to take out the clean channel
and the overdrive channels only. including the prescribed marshall amplification power supply.

The project will be used in a two 40W, 3inch stereo speakers. it will be then formed into a
mini stereo amplifier.

the design and speakers


at the upper layout is the clean channel PCB
at the middle is the overdriven channel PCB
at the bottom is the power supply unit (marshall)

the speakers



happy DIYing.....

[quaternotetriplet]

ask ko lng po sana sa mga gumagamit ng eagle cadsoft..

kung pano isave yung pcb layout without the components.
yung blank lng na pcb na ginawa sa eagle cad..

i'm really having a hard time following the tutorial.
yun ba yung "CAM PROCESSOR"..hind ko kc masundan.


medyo nakakalito kc yung mga terms..

looking forwards..tnx

punta ka sa view... tapos unmark mo ung gusto mong mawala.

[pie-key]

my custom painted DC brick clone..... my gf designed and painted it..... loved it







happy DIYing

[renz13]

my custom painted DC brick clone..... my gf designed and painted it..... loved it







happy DIYing

nice ang ganda ang sweet naman ng gf mo

[quaternotetriplet]

@ roni

ano gamit mong size na pandrill dun sa 3pdt mo? switch ni wiccan yan diba?

[plugzzzz]

@ roni

ano gamit mong size na pandrill dun sa 3pdt mo? switch ni wiccan yan diba?

man recomment ko yung drillbit ni epektos madaling madali lang mag drill pag yun ang gamit mo napakasmooth gamitin

[Musikerochan]

yep.
batteries are harmful to environment.
hehe.

+10 to the no battery movement!

[renz13]

mga sir ano pong pinang bubutas nyo po sa mga pcb nyo po?

nalibot na po namin ang buong raon wala po makita

may nakita po kami sa site ng egizmo pero nung nag punta po kami sarado po sila

[paparoni]

@nei_squadron:
hey man, ganito ako mag export ng ready-to-print PCB LAYOUT, kapag nasa board layout ka na..

1. click DISPLAY icon on the left side
2. select layers: Bottom, Pads & Vias only, click OK
3. click OPTIONS > USER INTERFACE > under LAYOUT choose BACKGROUND: WHITE, click OK
4. tapos exporting image na
5. FILE > EXPORT > IMAGE > check MONOCHROME > browse where you want to save image > set resolution at 500 DPI > click OK

happy eagle-ing! 

@quaternotetriplet:
yea switch ni wiccan gamit ko, good quality lalo na yung lugs.
1/2 size gamit ko pandrill sa 3pdt hole, pero tama si plugzzz recommended ang step-drills. yun din gamit ko.
 
@renz13:
sa alexan may hand drill, sa deeco may hand drill din.
hand drill din gamit ko pang-cut ng PCB, parehas kami method ni cacophony.

[jmwreck]

here is my board 

[neil_squadron]

@nei_squadron:
hey man, ganito ako mag export ng ready-to-print PCB LAYOUT, kapag nasa board layout ka na..

1. click DISPLAY icon on the left side
2. select layers: Bottom, Pads & Vias only, click OK
3. click OPTIONS > USER INTERFACE > under LAYOUT choose BACKGROUND: WHITE, click OK
4. tapos exporting image na
5. FILE > EXPORT > IMAGE > check MONOCHROME > browse where you want to save image > set resolution at 500 DPI > click OK

happy eagle-ing! 

@quaternotetriplet:
yea switch ni wiccan gamit ko, good quality lalo na yung lugs.
1/2 size gamit ko pandrill sa 3pdt hole, pero tama si plugzzz recommended ang step-drills. yun din gamit ko.
 
@renz13:
sa alexan may hand drill, sa deeco may hand drill din.
hand drill din gamit ko pang-cut ng PCB, parehas kami method ni cacophony.

@bro paparoni..tnx tnx much..appreciate it man..

[renz13]

@nei_squadron:
hey man, ganito ako mag export ng ready-to-print PCB LAYOUT, kapag nasa board layout ka na..

1. click DISPLAY icon on the left side
2. select layers: Bottom, Pads & Vias only, click OK
3. click OPTIONS > USER INTERFACE > under LAYOUT choose BACKGROUND: WHITE, click OK
4. tapos exporting image na
5. FILE > EXPORT > IMAGE > check MONOCHROME > browse where you want to save image > set resolution at 500 DPI > click OK

happy eagle-ing! 

@quaternotetriplet:
yea switch ni wiccan gamit ko, good quality lalo na yung lugs.
1/2 size gamit ko pandrill sa 3pdt hole, pero tama si plugzzz recommended ang step-drills. yun din gamit ko.
 
@renz13:
sa alexan may hand drill, sa deeco may hand drill din.
hand drill din gamit ko pang-cut ng PCB, parehas kami method ni cacophony.

out of stock yung drill sa alexan eh.....pero try ko sa ibang branch nila thanks po

[quaternotetriplet]

I'm having problem with RFI

meron bang nabibiling ferrite beads dito?

[cacophony]

@ pie-key: GRABE! Pabigat nang pabigat projects mo! Nice DC Brick! Kudos!

@ jmwreck: Very nice as well! As always!

@ paparoni & neil_squadron: Mas madali para sa akin mag-export ng board layout into PDF file since ready-to-print na rin siya. Print in high quality lang and page scaling is set to "None". Try mo.