Author Topic: DIY boutique amps, pedals, mod kits, proto-type circuits, etc - Post them here! (Read 1825360 times)

MetalX · « **Reply #8100 on:** February 08, 2014, 06:58:49 AM »

Quote from: tonwins11 on February 07, 2014, 12:20:30 PM

What I'm using now is the Canon DC adaptor (adjustable voltage 5-18 volts/500mA). Hums like bees. Set it to 9 volts and then just made a "huminator".

http://beavisaudio.com/Projects/Huminator/index.htm

Works well and the noise was gone. Pero I think the amperage is not enough since my delay doesn't delay lay lay lay anymore.

I was inspired to do this but I can't seem to see 780X to be cascaded after the LM317. Me thinks it's the resistor values that needs to be calculated to get 9 volts output coming from a 12 volt secondary output from the transformer.

https://www.generalguitargadgets.com/projects/24-power-supplies/134-ultra-clean-power-supply

Ginamit ko naman yung spare DC power adaptor ng laptop (18.5Vdc) going to a 7809 regulator. Naka daisy chain yung mga pedals ko. OK naman gamitin, tahimik naman yung MetalZone ko.

modmod · « **Reply #8101 on:** February 08, 2014, 01:10:10 PM »

Sino na nakagawa ng tight metal clone?

tonwins11 · « **Reply #8102 on:** February 08, 2014, 02:25:12 PM »

Quote from: modmod on February 08, 2014, 01:10:10 PM

Sino na nakagawa ng tight metal clone?

It's one of my future projects this year. I was inspired by this. Maganda yung pagka clone kasi the builder made some really useful mods. May noise gate + cab simulator output na wala sa original tight metal.

http://www.madbeanpedals.com/forum/index.php?topic=11561.0

tonwins11 · « **Reply #8103 on:** February 08, 2014, 02:28:48 PM »

Quote from: MetalX on February 08, 2014, 06:58:49 AM

Ginamit ko naman yung spare DC power adaptor ng laptop (18.5Vdc) going to a 7809 regulator. Naka daisy chain yung mga pedals ko. OK naman gamitin, tahimik naman yung MetalZone ko.

Hhhmmm... parang maganda idea din yan. Tamang tama kasi may kilala akong may sirang laptop. Ma harbor nga.

rickbig41 · « **Reply #8104 on:** February 08, 2014, 07:59:42 PM »

Quote from: MetalX on February 08, 2014, 06:58:49 AM

Ginamit ko naman yung spare DC power adaptor ng laptop (18.5Vdc) going to a 7809 regulator. Naka daisy chain yung mga pedals ko. OK naman gamitin, tahimik naman yung MetalZone ko.

okay yan, tahimik naman... 7809 din ginamit ko nung nag DIY ako...

jmwreck · « **Reply #8105 on:** February 09, 2014, 01:27:05 AM »

Quote from: cayle on February 07, 2014, 12:28:48 PM

Who here has already made a deep blue delay clone? How is it compared with the real DBD?

share ko lang, nakagawa na ako ng deep blue delay clone.

mas maganda compared sa rebote, may kaibigan ako na nakatry na ng orig, sabi nya same lang daw sa diy..

Sent from my GT-P3100 using Tapatalk

mother_earth! · « **Reply #8106 on:** February 09, 2014, 01:34:32 AM »

Quote from: jmwreck on February 09, 2014, 01:27:05 AM

share ko lang, nakagawa na ako ng deep blue delay clone.

mas maganda compared sa rebote, may kaibigan ako na nakatry na ng orig, sabi nya same lang daw sa diy..

Sent from my GT-P3100 using Tapatalk

ang ganda!

ikem · « **Reply #8107 on:** February 09, 2014, 10:47:54 AM »

Quote from: jmwreck on February 09, 2014, 01:27:05 AM

share ko lang, nakagawa na ako ng deep blue delay clone.

mas maganda compared sa rebote, may kaibigan ako na nakatry na ng orig, sabi nya same lang daw sa diy..

Sent from my GT-P3100 using Tapatalk

Iki-nompare ko yung circuit nito against sa rebote halos wala namang pinag kaiba. Hindi kaya sa anti alias filter nya?

cayle · « **Reply #8108 on:** February 09, 2014, 10:52:35 AM »

Quote from: jmwreck on February 09, 2014, 01:27:05 AM

share ko lang, nakagawa na ako ng deep blue delay clone.

mas maganda compared sa rebote, may kaibigan ako na nakatry na ng orig, sabi nya same lang daw sa diy..

Sent from my GT-P3100 using Tapatalk

Nice. What does the swithc in your build do?

yahoo! · « **Reply #8109 on:** February 09, 2014, 11:07:51 AM »

Quote from: modmod on February 08, 2014, 01:10:10 PM

Sino na nakagawa ng tight metal clone?

sorry for the crappy pic.

ako nakagawa na. im using old shredmaster casing for the clone.

jmwreck · « **Reply #8110 on:** February 09, 2014, 11:41:44 AM »

Quote from: cayle on February 09, 2014, 10:52:35 AM

Nice. What does the swithc in your build do?

salamat, I'm using a 100kb instead of 50kb for the time/delay, so ang purpose ng switch is to make longer/shorter delay times using a 100k resistor in parallel to the 100kb pot to get the stock value.

cacophony · « **Reply #8111 on:** February 09, 2014, 01:55:37 PM »

Quote from: jmwreck on February 09, 2014, 01:27:05 AM

share ko lang, nakagawa na ako ng deep blue delay clone.

mas maganda compared sa rebote, may kaibigan ako na nakatry na ng orig, sabi nya same lang daw sa diy..

Sent from my GT-P3100 using Tapatalk

nice build bro

jmwreck · « **Reply #8112 on:** February 09, 2014, 08:57:58 PM »

Quote from: cacophony on February 09, 2014, 01:55:37 PM

nice build bro

hi bro, salamat, kumusta? gumagawa ka pa ng pedals?

Sent from my GT-P3100 using Tapatalk

cacophony · « **Reply #8113 on:** February 09, 2014, 11:27:46 PM »

Quote from: jmwreck on February 09, 2014, 08:57:58 PM

hi bro, salamat, kumusta? gumagawa ka pa ng pedals?

Sent from my GT-P3100 using Tapatalk

Doing good man. Apparently hindi na since I started working.

tonwins11 · « **Reply #8114 on:** February 10, 2014, 07:51:28 AM »

Quote from: jmwreck on February 09, 2014, 11:41:44 AM

salamat, I'm using a 100kb instead of 50kb for the time/delay, so ang purpose ng switch is to make longer/shorter delay times using a 100k resistor in parallel to the 100kb pot to get the stock value.

I also did place a 100k pot on my DIY delay too. At past 2 o'clock, I hear clock noise already. Does yours happen too?

MetalX · « **Reply #8115 on:** February 10, 2014, 03:37:31 PM »

Quote from: jmwreck on February 09, 2014, 01:27:05 AM

share ko lang, nakagawa na ako ng deep blue delay clone.

mas maganda compared sa rebote, may kaibigan ako na nakatry na ng orig, sabi nya same lang daw sa diy..

Sent from my GT-P3100 using Tapatalk

Ayos, nice build. Gagawa din ako Deep Blue Delay.

MetalX · « **Reply #8116 on:** February 10, 2014, 03:39:06 PM »

Quote from: rickbig41 on February 08, 2014, 07:59:42 PM

okay yan, tahimik naman... 7809 din ginamit ko nung nag DIY ako...

Mas tahimik pa kesa Power-All ko. Nilagay ko sa 1509A.

jmwreck · « **Reply #8117 on:** February 10, 2014, 09:11:42 PM »

Quote from: tonwins11 on February 10, 2014, 07:51:28 AM

I also did place a 100k pot on my DIY delay too. At past 2 o'clock, I hear clock noise already. Does yours happen too?

yup, on that position, may noise pero oks lang naman, for me kasi, hindi masyadong hifi yung delay na hanap ko. hehe

Sent from my GT-P3100 using Tapatalk

jmwreck · « **Reply #8118 on:** February 14, 2014, 12:06:34 AM »

using aion board

Sent from my GT-P3100 using Tapatalk

tonwins11 · « **Reply #8119 on:** February 14, 2014, 07:05:59 AM »

Quote from: jmwreck on February 14, 2014, 12:06:34 AM

using aion board

Sent from my GT-P3100 using Tapatalk

Drool!

Bro, pm me the next time you'll be coming home in the Philippines. I also want to build this one someday!

bakit? · « **Reply #8120 on:** February 23, 2014, 09:06:48 PM »

great work guys.any one interested to show their builds on an exhibit i amputting upin updiliman and tarlac state university, among other places. we are targetting to showcase pinoy ingenuity and craftsmanship.it will be like gas day except everything will be pinoy made.anyone interested let me know.09062933242

tonwins11 · « **Reply #8121 on:** February 24, 2014, 03:21:26 PM »

Quote from: bakit? on February 23, 2014, 09:06:48 PM

great work guys.any one interested to show their builds on an exhibit i amputting upin updiliman and tarlac state university, among other places. we are targetting to showcase pinoy ingenuity and craftsmanship.it will be like gas day except everything will be pinoy made.anyone interested let me know.09062933242

This is great. I hope you'll hold exhibits in Visayas too.

Musikerochan · « **Reply #8122 on:** February 25, 2014, 03:25:59 PM »

got bored nung weekend, so built these.

single buffer.

dual buffer and junction box na din.

Ralph_Petrucci · « **Reply #8123 on:** February 25, 2014, 04:43:11 PM »

Quote from: jmwreck on February 09, 2014, 01:27:05 AM

share ko lang, nakagawa na ako ng deep blue delay clone.

mas maganda compared sa rebote, may kaibigan ako na nakatry na ng orig, sabi nya same lang daw sa diy..

Sent from my GT-P3100 using Tapatalk

Dude! I love the graphics!

Also saw your latest works, sobrang linis ng gut shots :O I wish ganyan ako kalinis gumawa :O

gandydancer123 · « **Reply #8124 on:** February 25, 2014, 04:49:16 PM »

Quote from: jmwreck on February 14, 2014, 12:06:34 AM

using aion board

Sent from my GT-P3100 using Tapatalk

OMG!!!!! nice!

News:

Author Topic: DIY boutique amps, pedals, mod kits, proto-type circuits, etc - Post them here! (Read 1825360 times)