Drums & Hardware Care and Maintenance Thread

[iplaydrums4u]

Ano yung bababad yung mga screws lang ohh yung buong tom? baka naman masira yun drums ko? tested na ba yan?

Thanks

siempre sir metal parts lang , effective rust remover siya.

*sorry OT na yata to

[The Last String Bender]

For stainless and hard wares... I used this to remove corrosion and light rust and it's really awesome... http://www.lastotallyawesome.com/html/Products_Household_CLRC.html

Nabili ko siya sa Japan products store...

I used it to remove the rust and corrosion then used WD40 to clean, restore and protect from dirt and rust... for heavy rust, I used rubbing compound...

Maganda din ang WD40 sa pag recondition ng wood mismo...

This is the set that I reconditioned... it is unused but was stocked for more than 10 years...

[dingdong_jigolo]

I used it to remove the rust and corrosion then used WD40 to clean, restore and protect from dirt and rust... for heavy rust, I used rubbing compound...

Maganda din ang WD40 sa pag recondition ng wood mismo...

Hindi po ba, mejo may kakaibang amoy ang WD40? I tried it, pero parang may masangsang na amoy siya after ko linisin yung mga drum hardwares eh.

[peeves24]

because its main component is fish oil

[vhinming]

madami na din yata nakaaalam , try nyo oxalic acid! per sachet un 10 petot lang isang sachet, sa isang balde 2 sachet ok na, maaalis mga kalawang babad lang 5-6hours oks na  

[cokeandjahsmoke]

madami na din yata nakaaalam , try nyo oxalic acid! per sachet un 10 petot lang isang sachet, sa isang balde 2 sachet ok na, maaalis mga kalawang babad lang 5-6hours oks na  

tanong lng sir, pag ginamit ba yung oxalic sa mga tension rods, advisable din ba yun? plan ko kasi after recording namin lilinisin ko yung kit ko eh di pa naman heavy yung kalawang..

[lockedonstratos]

ask lang po. safe po ba to gamitin sa drumset (finish)?


kasi po pledge talaga yung dapat bibilin. pero ito yung ibinigay Btw eto yung kit



nagaalangan pa po i-apply. first kit ko po kasi to

[reinramirez]

lumalangitngit yung pedals ko ano ba pwede gamitin dun wd40 din?

[lockedonstratos]

lumalangitngit yung pedals ko ano ba pwede gamitin dun wd40 din?

cleaner daw po talaga yung WD40. depende po kung gusto nyo gamitin ok lang
pero ang gamit ko saka mga kilala kong drummer, "singer oil". yung ginagamit sa barber shop? XD
tingin ko mas ok na pang lubricate ng drums yun.

[reinramirez]

cleaner daw po talaga yung WD40. depende po kung gusto nyo gamitin ok lang
pero ang gamit ko saka mga kilala kong drummer, "singer oil". yung ginagamit sa barber shop? XD
tingin ko mas ok na pang lubricate ng drums yun.

ahh, salamat chif, try ko muna wd40 pag ganun padin lagyan ko ng singer oil, wala naman siguro matutunaw na plastic sa avenger 2

[jay6ixx]

Para sa mga hinges or bearings na kelangan i-lubricate, nabasa ko sa ibang forums na white lithium grease ang gamitin. meron sha in spraycans.

Ginagamit ko siya sa pedals ko and it does the job. 

[sir_db]

salamat sa mga info... oxallic! nice2...  hehe rakenrol to the world!

[harugrugrug]

good! nakita mo din bro ung sinabi ko! hehe,balitaan mo kami ha.

[sir_db]

cgeh picturan ko rin... pero di kopa maasikaso eh... kailangan ko munang maiuwi sa pampanga ung mga nabili kong stands, sabay2 kong lilinisin...hehe salamat talaga...

[harugrugrug]

cgeh picturan ko rin... pero di kopa maasikaso eh... kailangan ko munang maiuwi sa pampanga ung mga nabili kong stands, sabay2 kong lilinisin...hehe salamat talaga...

Oks sir! Para May before and after pics! Aantayin namin yan.

[sonicassault]

My tom mount ball joints (Yamaha) dont really hold my toms. They sag and give in to gravity. How do I fix this?
I'm pretty uch afraid of disassembling the ball joint mechanism

[harugrugrug]

My tom mount ball joints (Yamaha) dont really hold my toms. They sag and give in to gravity. How do I fix this?
I'm pretty uch afraid of disassembling the ball joint mechanism

Sakit yan ng Yamaha,even the beech absolute in my work have this problem.
The solution is get a new joints sad to say,I tried to open it pero un nga basag na
Yung plastic ball sa loob,so I can't do anything about it,I hate ball type joints.
You try to contact vhinming here,he got my ball type joint snare stand.he replaced
The plastic ball with a metal ball! Aha ha.that's the solution I see

[sonicassault]

Sakit yan ng Yamaha,even the beech absolute in my work have this problem.
The solution is get a new joints sad to say,I tried to open it pero un nga basag na
Yung plastic ball sa loob,so I can't do anything about it,I hate ball type joints.
You try to contact vhinming here,he got my ball type joint snare stand.he replaced
The plastic ball with a metal ball! Aha ha.that's the solution I see

I was wondering if I can fit a Pearl style mount on it? Di rin ako masyado can ng L mounts, but that's just me. I'm thinking I might have to drill new holes for that though.

[harugrugrug]

Just check some L mounts and bring your mount as well,pag pumunta Ka jb or Kung San man para macheck mo.

[sonicassault]

Just check some L mounts and bring your mount as well,pag pumunta Ka jb or Kung San man para macheck mo.

sir di po ba ball joint din ang L-rod mounts? o may version na hindi ball joint?
baka lang kasi magsuffer sya ng same problems sa yamaha mounts, sayang effort ba.

[harugrugrug]

L mount bro,teka pm kita

[zwischenzug]

Ok ba ang carnauba wax panglinis sa shells and hardware?

[sonicassault]

Ok ba ang carnauba wax panglinis sa shells and hardware?

If you have wrapped shells, I think it'd be useless coz well, vinyl. If it's natural finish, I think it'll work, it doesn't seem to have a bad effect.
Sa hardware naman may nagsabi sakin once glass cleaner daw, haven't tried that though.
Pledge kaya pwede sa shells? Amoy orange pa yun! mmmmmmm. 

[harugrugrug]

Oks sakin pledge,ahaha,pero meron daw yung panlinis ng motor,lobo ba yun? Pero dude ako,
Stick to pranella na lang ako,ahaha

[infernal.battery]

what do you guys clean your pedal/hardware with?