recommend me a good thermal paste

[bisckye]

guys recommend me a good thermal paste
my cpu temp is 89degree celsius
samin kasi may tinitinda 50 pesos lang hindi ko alam kung maganda yun or waste of money lang

[marzi]

dati meron sa CD-R King thermal paste na magaganda ang feedback sa mga forumites ng tipidpc...di ko na mahanap yun ngayon..

sa RSun meron Zalman...Php450 yata isang bote..

[bisckye]

isang bote??
madami na yun ah..
may nakita kasi ako
isang syringe 600pesos

[marzi]

sinlaki ng bote ng nail polish yun...pati yung takip nya nakalagay na din dun yung applicator...para ka lang naglalagay ng nail polish sa processor mo...yung isang syringe di mo naman gagamitin lahat yun sa isang lagayan lang eh..

[3650guy]

Arctic silver, Tuniq, are among the high end brands for thermal paste that for me are indulgence.  only for the hardcore gamer or overclocking boyz.  400+ sa tipidpc ata.
ang taas naman ng temp mo. anong procie yan?

its nano silver/gold for me sa cdr king. he he.

[bgomez]

I use Tuniq and have been very happy with it although applying it is not that easy because of the thickness of the thermal compound.

[bisckye]

guys hinugot ko lang yung cpu fan at ibinalik ko ulit
after nun bumaba na sa 73degree celsius

[lowtuneduser]

taas pa din, init pa din niyan.

[bisckye]

so anung gagawin ko?
is it dangerous? 

[marzi]

^kelangan mo linisin maigi talaga..hindi maaayos ng simpleng hugot-balik lang yan..

pagka tanggal ko, clean mo yung contacts with acetone and cotton buds..make sure na walang residue na matitira..tapos apply ka na ng thermal paste sa ibabaw ng processor..ok lang kahit di mo na lagyan yung contact side ng fan..tapos ikabit mo na ulit..make sure na saktong amount lang ilalagay mo at walang papatak sa paligid ng processor, it might cause short circuit eh..

tapos check mo temp...acceptable for a dual core procy is at around 50-58 degrees celsius(take note, acceptable lang ha hindi yan yung optimal for hard core gaming mas iinit pa ulit yan) sa single core di ko sure kung ano...

[rastaman69]

sa tipidpc.com po. try searching for Gelid. i used Zalman and AS5 dati kaso hirap iapply den switched to gelid. til now gamit ko sa dalwang desktop ko. meron din 2step cleaner look for camshow sa tipidpc.

[bisckye]

after applying the thermal paste ba
ready to turn on na ba yung pc or need pang matuyo yung thermal paste?

[marzi]

after applying the thermal paste ba
ready to turn on na ba yung pc or need pang matuyo yung thermal paste?

ok na yun pede mo na on pc mo...kung gusto mo makasiguro, pagdikitin mo yung fan at cpu tapos iwan mo muna ng 15 mins...pero sakin pagka lagay salpak agad yung ibang parts tapos gamit na ulit..

[bisckye]

panu kung halimbawa nalagyan na ng thermal paste
tapos yung temp ay hindi pa din nagbabago anu na kayang problem?

[marzi]

-bad tower case ventilation
-consider cleaning the cpu fan na din
-you have some background programs that are causing cpu overload. check your task manager, clean your windows startup, etc.

[3650guy]

yup case ventilation...  Intel recommends a front intake blower, while AMD recommends a fan at the back, below the power supply exhaust fan.  a side panel fan would also be nice, or a top blowhole also.  it depends also if you have a "hot" video card.

i test mo nga with the side panel open then check the temps, then point an electric fan and check again...

[rastaman69]

you might need some modifications done to your case for proper ventilation sir. check us out sa tipidpc.com
we are a group of modders scattered around the metro providing pc modifications and enhancements.

United Modders Philippines
http://tipidpc.com/viewtopic.php?tid=93289