TO Fender Strat Owners

[mahavishnu]

QUESTION FOLKS

what's the standard height of the strings in the first fret for strats? or the standard radius? we're replacing a nut that's still unmarked.. we would like to slice it same with fender's measurement. if you guys know, please provide heights for each strings..

GREATLY APPRECIATED!

[sonnyrayvaughn]

something to start you up:

http://www.fender.com/support/setup/stratsetup.php

look also for Mr.Gearhead in Google...plenty of topics about this in the WWW

[mahavishnu]

sir thanks, kaya lang di ko mahanap yung height ng nut slots sa fender, check ko na lang siguro yung gearhead. thanks!

[mahavishnu]

up... ano height ng strings ng strat nyo sa 1st fret? thanks

[superoxy]

o ayan kahit hindi ako Fender Strat owner   baka makatulong

From http://www.graphtech.com/faqnut.htm

Q: How deep should I carve the groove for a nut on my guitar neck?

A: On a new Graph Tech nut, it's recommended that you sand the bottom of the nut to compensate for the height, though you can carve the groove a little, preferably with a nut file or, in a pinch, a piece of 400 grit sandpaper folded as thin as you can. After restringing, press down each string in turn on the 3rd fret. Now check the clearance of the string above the first. If it's touching the first fret, the nut slot is too low. Proper nut slot height is just a paper thickness between the string and the first fret on the plain strings and about twice that on the wound strings. Back to top.

[mahavishnu]

uy thank you sir! try ko yan.. siguro depende nadin sa feel yun height e.. maarte lng talaga ako gusto ko yung standard hehe