Behringer ep4000 power amps

[nico denmark]

is that the price on those units each ot pair end where are they sold ??

[mants]

is that the price on those units each ot pair end where are they sold ??

per pc. sir...8,200 less 10 or 15%.

[nico denmark]

so are they the price worth ??

[Glennox]

...Bossing meron na daw stock ng C12 500mb version 2 sa MB...,,

meron na sila nyan, c12 500mb, maganda isalpak sa mt122.

...Tama ka dyan bossing...,,

so are they the price worth ??

...P-audio speakers are always worth it. Not too expensive but the performance is always at par with top speaker brands.  Not to mention TRUE SPECS...,,

[nico denmark]

yeah true specs he he who sells it in phils ?? link please ....by the way does anyone have TRUE specs on jh.186 and jh-188 ...somrthing tells me that 109 and 110 dbw 8 ohm isnt true he he ...besides xmax and t/s would be nice knowing

[mants]

yeah true specs he he who sells it in phils ?? link please ....by the way does anyone have TRUE specs on jh.186 and jh-188 ...somrthing tells me that 109 and 110 dbw 8 ohm isnt true he he ...besides xmax and t/s would be nice knowing

crown phils.      http://www.crown.com.ph/categories/Instrumental-Speakers/?sort=featured&page=2

[nico denmark]

that wasnt the link i was looking for ...i was looking for TRUE readings he he 110 db 1 watt is impossible in the usefull frequencerange ...thats why i suspect crown to "modify"  there data ....besides there is no t/s xmax and so on at crown.com

[nico denmark]

yes all the data available that are more true than the ones stated by crown ...110 dbw at 40 hz is NOT possible with 1 watt load ;o) ....also xmax is intresting to me

[mants]

yes all the data available that are more true than the ones stated by crown ...110 dbw at 40 hz is NOT possible with 1 watt load ;o) ....also xmax is intresting to me

sir most china made speaker they dont have a general specification,, not like those branded one that you can find all the general specification at their website... like this,,,                                               http://www.paudiothailand.com/pdf/products/SD18-1700EL4.pdf

[nico denmark]

i know that but seeing how many are using them in phils i thought that atleast 1 or 2 had tryied meassuring these things ...coil.length and magneticgap for the linear xmax should be easily meassured and the db also with a db-meter and and toneburst with voltmeter on terminals ...am i talking bull**** now he he

[eirol_99]

anybody got a chance to measure the high rail voltages of the ep4000s?  para sana ma check natin if tama yung claimed output power nya. thanks.

[barracks01]

anybody got a chance to measure the high rail voltages of the ep4000s?  para sana ma check natin if tama yung claimed output power nya. thanks.

+1

[nico denmark]

eirol even 10.000 volts wont be good if it doesnt deliver continous power ;o) ...but take a look at inuke nu6000 ...dont know about technicasl difference only the specs stated and it doesnt cost 50% more money for the 50% more power ;o) ...price is very close with those 2 amps

[eirol_99]

eirol even 10.000 volts wont be good if it doesnt deliver continous power ;o) ...but take a look at inuke nu6000 ...dont know about technicasl difference only the specs stated and it doesnt cost 50% more money for the 50% more power ;o) ...price is very close with those 2 amps

nico, with the supply voltages available we could paracticaly compute the baseline RMS power for a given load... 
which would help our fellows here decide if they ought to buy an ep4000 or not.

[barracks01]

nico, with the supply voltages available we could paracticaly compute the baseline RMS power for a given load... 
which would help our fellows here decide if they ought to buy an ep4000 or not.

tama ka boz.. itong isang to thread hijacker ei basta na lang singit ng singit. 

[barracks01]

eirol even 10.000 volts wont be good if it doesnt deliver continous power ;o) ...but take a look at inuke nu6000 ...dont know about technicasl difference only the specs stated and it doesnt cost 50% more money for the 50% more power ;o) ...price is very close with those 2 amps

nico we are not discussing your inuke here.. make your own thread please..

[nico denmark]

as i see you can ONLY calculate the rms PEAK power knowing the rails ...unless you put a load on terminals and a tone on input ....i was supriced with a berry epq 1200 that i got just for fun ...it really delivered but not untill we raised the input signal to above rated and without peaklimiter on ...it was pulling 4 pc 15"+1,75" tops and 2 pc 18" boxes ....and only rated at 2x600 watt peak he he ...some times we get supriced ....ps it was running the new years party for 2 days

[nico denmark]

well in a thread that contains the words "if they should buy" i guess its not that much off topic to mention the other alternativs that are bassicly same amp in another cover ...sam technoligy used in both and same tech team developíng both ...only diff is less weigt in new version

[barracks01]

well in a thread that contains the words "if they should buy" i guess its not that much off topic to mention the other alternativs that are bassicly same amp in another cover ...sam technoligy used in both and same tech team developíng both ...only diff is less weigt in new version

we talking to a specific amplifier the EP4000.. our fellow forumers wants the performance and review  of the said amplifier. you can leave a comment if you have any knowledge regarding this amplifier for the benefits of others.

[nico denmark]

well my knowledge is based on specs and own test of the smaller 1200 version only ...and from my experience i tell that the big briother to this particular amp delivers 50% more at 25% higher price only ...thought sharing advice and personal experiences was the exact point of this forum ;o) ...and since he doesnt know the exact ep-4000 i guess hes not that decided on buying exactly that if better alternatives are precent ...or am i wrong ...am i giving bad advice

[nico denmark]

but whats the price on the ep-4000 in phils ?? ...i just tjecked and here its 16104 peso delivered incl tax and so on and 3 year warranty ....doesnt seem expensive at all comparing to major brands

[eirol_99]

as i see you can ONLY calculate the rms PEAK power knowing the rails ...unless you put a load on terminals and a tone on input ....i was supriced with a berry epq 1200 that i got just for fun ...it really delivered but not untill we raised the input signal to above rated and without peaklimiter on ...it was pulling 4 pc 15"+1,75" tops and 2 pc 18" boxes ....and only rated at 2x600 watt peak he he ...some times we get supriced ....ps it was running the new years party for 2 days

your set up would not measure the power output of that amp.
u could try that set up here in the phils, which is way hotter than in your native denmark.

[nico denmark]

eirol ok ill do that ...but im not sure ill bring the small epq1200 ...priorities you know he he ...but i AM mooving to phils and i WILL bring amplifiers for stageuse ...just havent decided on wich amps and the amount yet ...sending stuff from denmark is soooo expensive ...i send 2 pair of pc speakers and 2 boxes of candy in december to phils total weight 8,5 kg and approx 35x35x40 cm box with regular mail and they price was 4600 peso plus 1150 peso tax in phils for the impoert of speakers even though it was for provate use .....so ill definetly NOT send 8 amps at 40 kg each he he

[Live Pro Audio]

Sir nico you can buy all your needs in cebu city , cebu is near leyte you can ride 30 mins by airplane

[nico denmark]

live pro audio yeah but what will be the price diff between the countrys ....do you have any links to a seller with actual prices ??