behringer inuke

[N1X]

may friend ako sa calapan. Dec lang nya binili Inuke600dsp nya. sabi nya tinalo pa daw CA2 soundstandards nya tsaka phonic XP5000
mas malinaw, pero 2 weaks ago nag txt sya sakin sira na pareho. yung isa blackout ang display, yung isa wala na daw output

[Xelly]

may friend ako sa calapan. Dec lang nya binili Inuke600dsp nya. sabi nya tinalo pa daw CA2 soundstandards nya tsaka phonic XP5000
mas malinaw, pero 2 weaks ago nag txt sya sakin sira na pareho. yung isa blackout ang display, yung isa wala na daw output

So kung meron tayong 1yr warranty, ibig sabihin isang taon lang tayo mapapanatag. Wag naman sana.

[Jef2]

    i just found out that my two repaired inuke 6000 had problems on the power supply sections not on the amp.  for smps designed amps, it's imperative to use automatic voltage regulators.  at 4 ohms load, the inuke 6000 consume <700 watts only.  just buy a 1500 kva rated avr and you can already plug two inuke 6000 amps on it.

[N1X]

So kung meron tayong 1yr warranty, ibig sabihin isang taon lang tayo mapapanatag. Wag naman sana.

ang problema kasi hindi yung warranty, ang big deal ay yung abala sa event pag tumirik sya,, pareho ni Arrago taga calapan pa sya, napaka layo bago ma service ng joint venture,

Im not against sa behringer infact bilib ako sa idean nila at sa maraming bagay kaso walang tibay na maaasahan 

[tjlimjoco]

    i just found out that my two repaired inuke 6000 had problems on the power supply sections not on the amp.  for smps designed amps, it's imperative to use automatic voltage regulators.  at 4 ohms load, the inuke 6000 consume <700 watts only.  just buy a 1500 kva rated avr and you can already plug two inuke 6000 amps on it.

B0s panu mo nacompute yun power consumption?  at anung brand ng AVR ang ok? 

[Xelly]

B0s panu mo nacompute yun power consumption?  at anung brand ng AVR ang ok? 

+1

[dcdbriones]

B0s panu mo nacompute yun power consumption?  at anung brand ng AVR ang ok? 

sa presyo ng magandang avr eh mas sulit pa kapag bumili na lang ng much heavier pati expensive na amp. sa avr maganda yung original na stac, mahal nga lang

[Xelly]

sa presyo ng magandang avr eh mas sulit pa kapag bumili na lang ng much heavier pati expensive na amp. sa avr maganda yung original na stac, mahal nga lang

Onga ang bigat din ng high kva rating avr!! Pero sulit na rin kung digital mixer mo ü

[alghanold]

 http://forum.behringer.com/showthread.php?964-iNuke-NU6000-problem

[Jef2]

B0s panu mo nacompute yun power consumption?  at anung brand ng AVR ang ok? 

    it's in the user's manual. try the panther pvr1500 avr. this is what i required sa 2 bar installs na nasiraan previously ng nu6000. the ac power there fluctuates rapidly especially around 11pm onwards.

[Xelly]

    it's in the user's manual. try the panther pvr1500 avr. this is what i required sa 2 bar installs na nasiraan previously ng nu6000. the ac power there fluctuates rapidly especially around 11pm onwards.

At may nakikita akong ganyan sa Ace Hardware kung di ako nagkakamali

[tjlimjoco]

    it's in the user's manual. try the panther pvr1500 avr. this is what i required sa 2 bar installs na nasiraan previously ng nu6000. the ac power there fluctuates rapidly especially around 11pm onwards.

B0s nagtry muna kami ng 1 Inuke 6000.  Grabe mas malakas nga ito sa Crell Ca20 at Ep4000 namin Salamat na din B0s sa advice.  Gagamit muna kami ng avr. May nakatabi kami na Omni 2kva dito. 

Super gaan at hindi umiinit itong Inuke!  Ganda din pang mid-high. Pero observe din muna jejeje

[Jef2]

   just passed 3 auditions on 3 bar installations for the inuke 6000. there is really an obvious difference in the power output and sound quality was the usual commentary. hoping the latest batch of the inukes are better this time.

[king_james]

    i just found out that my two repaired inuke 6000 had problems on the power supply sections not on the amp.  for smps designed amps, it's imperative to use automatic voltage regulators.  at 4 ohms load, the inuke 6000 consume <700 watts only.  just buy a 1500 kva rated avr and you can already plug two inuke 6000 amps on it.

What happened to the repaired units?? 

[Jef2]

What happened to the repaired units?? 

    they are all working fine.  3x a week for live bands and 6x a week for bgm. 3 different installations yan. 

another 3 amplifier upgrades very soon:

[Xelly]

    they are all working fine.  3x a week for live bands and 6x a week for bgm. 3 different installations yan. 

another 3 amplifier upgrades very soon:

Lahat ng installation nyo sir ng NU6000 nirerequire ninyo na may kasamang avr?

[Jef2]

Lahat ng installation nyo sir ng NU6000 nirerequire ninyo na may kasamang avr?

    i usually do sir.

[king_james]

@ Jef2

Sir,  a 1.5- 2kva AVR sufficient for the Inuke 6000 amps?   

[Xelly]

@ Jef2

Sir,  a 1.5- 2kva AVR sufficient for the Inuke 6000 amps?   

Additional question. Solo lang ba dapat ni NU6000 yung AVR o pwede may iba pang isaksak dun na mababa lang naman power rating like laptop, audio interface, digital porcessor?

[Jef2]

@ Jef2

Sir,  a 1.5- 2kva AVR sufficient for the Inuke 6000 amps?   

    yes since the power consumption of the inuke 6000 is just 620 watts at 4 ohms.  you can get a higher value avr but this will be costlier of course.

Additional question. Solo lang ba dapat ni NU6000 yung AVR o pwede may iba pang isaksak dun na mababa lang naman power rating like laptop, audio interface, digital porcessor?

     i usually use 1 1.5kva for 1 inuke 6000 amp but you can still plug 2 inuke 6000 amps (max).

if you intend to plug additional items on the avr, compute the power consumption of the items first.  the total should not exceed 1.5kva but remember to have headroom too.  although i plug my mixers and other processors onto a line conditioner.

[king_james]

@ Jef2

Thanks sir for all the information.

Our QSC RMX5050s broke down a couple of times already (due to old age).  The new distributor (JB) doesn't have parts and I just could not understand why So we decided to sell them "as is, where is". 

We might try these NU6000 amps since they are relatively cheap, powerful and lightweight.  If the distributor has good after sales service in case of repairs, then I will able to gamble on this. 

[yahu]

attention:   Jef2, king_james, tjlimjoco

kayo po ba ay iisang tao o grupo?
may soundsystem ba talaga o ala nman pla?
may iisang tindahan o may separate na binebentang items?

sencya na nakakahalata lang ako....somethings malansa e. just asking lng bro o mga bro.

[kartar]

B0s panu mo nacompute yun power consumption?  at anung brand ng AVR ang ok? 

sabi sa specs ng NU6000 at 4ohms load ang power consumption ay 620 W.

pwede kang gumamit ng clamp-ammeter para makuha yung current tas multiply mo na lang sa voltage source para ma compute mo ang power consumption.

[wenz]

Hello po, O plan to purchase iNUKE NU4-6000. may naka pag try na ba sa inyo?

[tjlimjoco]

Hello po, O plan to purchase iNUKE NU4-6000. may naka pag try na ba sa inyo?

B0s, wala yata ganitong model sa Pinas