hulika

Author Topic: If you'll have your own Custom snare drum, what would it be?  (Read 3397 times)

Offline sandythedrummer

  • Philmusicus Addictus
  • *****
If you'll have your own Custom snare drum, what would it be?
« on: November 02, 2006, 12:48:10 AM »
Drum Maker: Pearl
Material: Maple
Thickness: 10 ply / 10mm
Size: 13x5.5in
Bearing edge: 45 deg
Lugs: Tube Style Gold Plated
Hoops: Die Cast Gold Plated
Washers: Plastic
Finish: Autumn Burst
Strainer: 20 strand
Throw-off: Classic Dual Throw-off
Heads: Remo Coated ambassadors
"I BELIEVE IN CHRIST LIKE I BELIEVE IN THE SUN. NOT BECAUSE I CAN SEE IT, BUT BY IT, I CAN SEE EVERYONE ELSE....."

Offline fredzs

  • Senior Member
  • ***
Re: If you'll have your own Custom snare drum, what would it be?
« Reply #1 on: November 02, 2006, 03:25:47 AM »
Drum Maker: Pearl Masterworks
Material: Maple
Thickness: 15 ply
Size: 13x6.5
Bearing edge: 45
Lugs: Tube Style Black Hardware
Hoops: Die Cast Black Hardware
Washers: Plastic
Finish: Scuba Blue with Tamo Veneer http://www.pearldrummersforum.com/attachment.php?attachmentid=204869&stc=1 sample pic.

Throw-off: Trick Strainers
Heads: Evans Genera G1
« Last Edit: November 02, 2006, 03:28:17 AM by fredzs »

Offline bangbus

  • Forum Fanatic
  • ****
Re: If you'll have your own Custom snare drum, what would it be?
« Reply #2 on: November 02, 2006, 04:50:09 AM »


done lookin at the pic? ok BangBus Signature snare will be simple lang naman eh.

COMPANY: Pearl or OCDP

SHELL MATERIAL/CONSTRUCTION:
- Free Floating Snare Concept
- just like the shell of the DW's edge snare pero instead maple, the middle portion of the shell will be plain transparent Acrylic
- instead of the steal portion of the shell, I would have the 2 rows of steal as 10 plies of African Rosewood
- with 2-inch hole/port that could be shut using a sliding mechanism within the shell

THICKNESS: As mentioned, 10 Plies

SIZE: 14x8

BEARING EDGE: One side flat and the other 45

LUGS: Free Floating Lugs, 24k Gold Plated

HOOPS: 10-hole Die Cast tapos yung top portion S-Hoop style, 24k Gold Plated

WASHERS: Plastic

SNARE WIRE: Adjustable 3-split section 24 strand by Fat Cat

TENSION RODS: By Tight Screw

THROW OFF: Kung pwede gawin pang Free Floating yung Dunnett Snare Release System

HEADS: Evans EC with dot batter side, Evans Hazy 200 snare side

FINISH: Natural, as it is for the shell...bubinga and clear acrylic...and 24k gold plated hardware

LOGO/BADGE: 24K Gold Plated encrusted with Swarovski fake diamonds

PROMOTION:
- Available for a limited time only at selected delears worldwide
- Only 777 units will be produced
- Comes with certificate of authentication
- Both shell and certificate per unit are individually signed by yours truly
- Will come with a Le Blonde Snare Case


Sarap mangarap
 :mrgreen:

Offline intake

  • Philmusicus Addictus
  • *****
Re: If you'll have your own Custom snare drum, what would it be?
« Reply #3 on: November 02, 2006, 10:30:11 AM »
mapa pearl man yan o lazer...
13x3 brass snare ok na sakin
with 2 strainers and a Remo Soundmaster
skin on the batter  :-)
black or chrome hardware ok lang  :-D
Laptop = $600
DSL = $30/month
Locked threads @ AGT sub forums = PRICELESS :D

Offline Gep

  • Philmusicus Addictus
  • *****
Re: If you'll have your own Custom snare drum, what would it be?
« Reply #4 on: November 02, 2006, 10:40:01 AM »
Gusto ko experimental! Hahaha.

6" x 13" 10-ply maple/clear acrylic hybrid.
10 Tama Omni-tune lugs.
Triple-flanged top hoop.
Rubber washers.
One quick sideway release throwoff system (can be turned on and off by using the knees) and one outward release throwoff.
« Last Edit: November 02, 2006, 10:44:42 AM by Gep »


Offline intake

  • Philmusicus Addictus
  • *****
Re: If you'll have your own Custom snare drum, what would it be?
« Reply #5 on: November 02, 2006, 10:50:20 AM »
mas ok pag yung batter mo gawa sa calf skin  :lol:
Laptop = $600
DSL = $30/month
Locked threads @ AGT sub forums = PRICELESS :D

Offline BiliBidboy

  • Forum Fanatic
  • ****
Re: If you'll have your own Custom snare drum, what would it be?
« Reply #6 on: November 02, 2006, 11:54:31 AM »
mine would be a Pork Pie Piglite Acrylic Snare Drum
Amber, 13x7 Inches...gusto ko pink! hehee




Heavy 2.3mm triple-flanged hoops. 7" x 13" size sounds great cranked high and tunes great in the midrange.

pede din lagtan ng LED sa loob during gigs illumunated ka! 8-)
X-DW user...SPAUN convert!

Offline fredzs

  • Senior Member
  • ***
Re: If you'll have your own Custom snare drum, what would it be?
« Reply #7 on: November 02, 2006, 12:53:43 PM »
^

I've tried that snare, really nice! But I ended up buying the B.O.B model  :lol: Very Pretty Snares.

Offline Gep

  • Philmusicus Addictus
  • *****
Re: If you'll have your own Custom snare drum, what would it be?
« Reply #8 on: November 02, 2006, 01:01:16 PM »
Ano yung B.O.B.?

Offline fredzs

  • Senior Member
  • ***
Re: If you'll have your own Custom snare drum, what would it be?
« Reply #9 on: November 02, 2006, 01:52:16 PM »
Black Over Brass.

6.5x14 sya.. 1.5mm Brass Shell, Black Nickel Plated with Tube Lugs. :)

http://img.photobucket.com/albums/v404/fweyd/P5050042.jpg

Offline Gep

  • Philmusicus Addictus
  • *****
Re: If you'll have your own Custom snare drum, what would it be?
« Reply #10 on: November 02, 2006, 02:00:22 PM »
Wow! Ang yaman mo talaga!

Offline fredzs

  • Senior Member
  • ***
Re: If you'll have your own Custom snare drum, what would it be?
« Reply #11 on: November 02, 2006, 02:05:13 PM »
waah.. Sana  :-D

anywayz, OT na po tayo.. hehe

Back to topic !  :-D

Offline peeves24

  • Philmusicus Addictus
  • *****
Re: If you'll have your own Custom snare drum, what would it be?
« Reply #12 on: November 02, 2006, 02:12:33 PM »






maple/purpleheart stave shell and wood hoops, need i say more?
« Last Edit: November 02, 2006, 02:16:58 PM by peeves24 »

Offline pmack

  • Philmusicus Addictus
  • *****
Re: If you'll have your own Custom snare drum, what would it be?
« Reply #13 on: November 02, 2006, 07:57:15 PM »
^^^^^^^^^^
peeves did you make that!?!?!!?!?
seriously bro, i want one... kung ikaw nga gumawa nyan, sayo na ko pagagawa kahit sampung taon pa abutin man!!!!


siguro if ever magkakaron ako ng signature snare, i don't care kung anong drum company man ang gumawa basta:

bubinga innermost and outermost plies of the shell with 8 plies of maple sandwiched in between.
a mix of bubinga and maple wood para sa woodhoops.
10 lugs.
black chrome hardware.
with a throw-off similar to pearl's reference snares.
natural finish syempre.



peeves you gotta stop teasing me with your awesome snares man.
:D
« Last Edit: November 02, 2006, 08:03:07 PM by pmack »

Offline peeves24

  • Philmusicus Addictus
  • *****
Re: If you'll have your own Custom snare drum, what would it be?
« Reply #14 on: November 02, 2006, 08:13:15 PM »
^^^^ hahaha i wish!

di ako gumawa nyan...pero nabanggit ko na naman ata sa yo di ba? my evil plans?

soon

Offline ayoice

  • Regular Member
  • ***
Re: If you'll have your own Custom snare drum, what would it be?
« Reply #15 on: November 02, 2006, 09:06:08 PM »
oh my peeves... what the hell is that?!?!?! it looks amazing!!!! oh my i wna lay my stick on that thing!!! what is it? a 40-ply shell?!?!? and the colors are amazing!!! and i thought my vinnie was eye-catching... :-(

Offline peeves24

  • Philmusicus Addictus
  • *****
Re: If you'll have your own Custom snare drum, what would it be?
« Reply #16 on: November 02, 2006, 10:16:19 PM »
stave shell with matching wood hoops

walang plies yan

Offline ayoice

  • Regular Member
  • ***
Re: If you'll have your own Custom snare drum, what would it be?
« Reply #17 on: November 02, 2006, 10:33:47 PM »
ah tlga? so parang one big thing lang yung shell? walang layers? astig! parang ang kapal nung loob e!!! what's a stave shell?? :-D

Offline drumachine

  • Forum Fanatic
  • ****
Re: If you'll have your own Custom snare drum, what would it be?
« Reply #18 on: November 03, 2006, 01:03:45 PM »
guys! lam ko prang mejo exagerated pero i2 tlaga gusto kong concept galing sa 2 kong idol. imagine-in nio ha!






pagsasamahin ko xa... gawa ng FERNANDO gusto ko! pinoy ako eh!

shell - kgaya kay ulrich painted with black powder paint made of acryllic material (naka emboss ung mga diamonds) tpos ung logo ko on each side. hehe (ASA)

lugs - tube style na black chrome.

throw off - gibraltar lang...

hoops - die cast na made out of wood??? jowk. wood lang. tapos nka ukit ung name ko and band. hehe

tension rods - gibraltar p rin.

washers - plastic

snare wire - ung kagaya kay kuya bangbus. lufet kc ng fatcat eh.

skin - remo pinstripe coated.


un lang... mangarap na lang...
watch your problem? ;p

Offline peeves24

  • Philmusicus Addictus
  • *****
Re: If you'll have your own Custom snare drum, what would it be?
« Reply #19 on: November 03, 2006, 01:09:50 PM »
what's a stave shell?? :-D

planks of wood cut and glued like this



then turned on a lathe to this



Offline drumachine

  • Forum Fanatic
  • ****
Re: If you'll have your own Custom snare drum, what would it be?
« Reply #20 on: November 03, 2006, 01:19:43 PM »
di kaya mdaling macra yan.?> pero i'm sure malaks yan! and kpl eh. :evil:
watch your problem? ;p

Offline ayoice

  • Regular Member
  • ***
Re: If you'll have your own Custom snare drum, what would it be?
« Reply #21 on: November 03, 2006, 02:05:13 PM »
ah i see! cool :-D

Offline intake

  • Philmusicus Addictus
  • *****
Re: If you'll have your own Custom snare drum, what would it be?
« Reply #22 on: November 04, 2006, 12:13:00 PM »
ahh...ganyan pala ang stave shell..gets gets!  :-D
Laptop = $600
DSL = $30/month
Locked threads @ AGT sub forums = PRICELESS :D

Offline engot_spears

  • Senior Member
  • ***
Re: If you'll have your own Custom snare drum, what would it be?
« Reply #23 on: March 18, 2010, 07:36:47 PM »
14 x 7.5 Split snare
17 pLy Maple and Bubinga
DW tube Lugs
True Tune screws
Trick Throw off
Fat cat snare wire
Yung inLays ng design Diamonds na mag sserve as sparkles ng snare..Ü

Offline francisnuega

  • Senior Member
  • ***
Re: If you'll have your own Custom snare drum, what would it be?
« Reply #24 on: March 26, 2010, 09:05:10 AM »
Brand: Gretsch
Wood: 12 ply Maple
Size: 14x5(Main Snare), 12x4(Side Snare)
Lugs: Custom Lugs, nagawa ko na sa snare ko hehehe, kahit anong higpit hindi bumibigay.
20 Strand Snare Wire
Heads: Remo
Finish: Tobacco Fade
Drop Style Throw-off, para hindi hustle hehe