urgent po....need help kung pano mag save ng settings sa zoom g7?
kakakuha ko lang kasi kahapon pero di ma-save mga edited sounds ko.
reply lang po or PM....tulong po please
may manual po ba kayo? meron din akong G7. Madali lang yan...
pagmayroon na kayong patch na natimpla punta lang po kayo sa Store/Swap...nasa baba yun ng Param 2 and 3. Press mo store button tapos, hanapain nyo kung saan nyo gustong isave...tapos press mo ulit store/swap button. Tapos may lalabas na dun saving...tapos ok na yun mga 3 sec.
kung di mo maintindihan.
1. In play mode, manual mode, or edit
mode, press the [STORE/SWAP] key.
The G7.1ut switches to the store standby
condition, and the currently selected patch
becomes the store/swap source.
The [GROUP/BANK] indicator shows the store/
swap target group name and bank number.
HINT
• In the factory default condition, the user groups
(U, u) contain the same patches as the preset
groups (A, b).
• If a patch has been edited, it will be stored or
swapped in the edited condition.
• If a patch from a preset group was selected
when you pressed the [STORE/SWAP] key,
the first user group patch will automatically be
selected as store target.
2. To store/swap individual patches,
turn parameter knob 3 to bring up the
indication "PATCH" in the top right of
NOTE
When "BANK" is shown, the subsequent operation
will be carried out for the entire bank. Make sure
that the correct indication is shown.
3. Turn parameter knob 2 to bring up the
indication "STORE?" or "SWAP?" on
the display.
When "STORE?" is selected, the current patch
can be stored as any user patch.
When "SWAP?" is selected, the current user
patch can be swapped with any other user patch.
NOTE
If the source patch is from a preset group, the
indication "SWAP?" does not appear.
4. Use the [TYPE] knob or BANK [W]/
[Q] foot switches to select the store/
swap target group name/bank
number.
5. Use parameter knob 1 or the foot
switches 1 – 4 to select the store/
swap target patch number.
6. Press the [STORE/SWAP] key once
more.
The store/swap process is carried out, and the
G7.1ut then returns to the play mode or manual
mode with the store/swap target patch being
selected.
By pressing the [EXIT] key instead of the
[STORE/SWAP] key, you can cancel the process
and return to the previous mode.
refer to page 27-29 sa manual...may image dun
Ganda nyang G7....tyaga lang sa timplahan. Sulit ka naman pag nakuha mo na.