Re: Analog 101

[rolexm]

here is my board setup, all analog, all true bypass



\m/ \m/

Artec is buffered bypass di ba?

[AnodBiomech]

Artec is buffered bypass di ba?

i think true bypass bro,

http://www.artecsound.com/effect/index.html

[bran_enzo]

anu pong mga effects mairerecommend niyo kung ang tugtogan eh urbandub to franco ang tugtogin???

[rolexm]

i think true bypass bro,

http://www.artecsound.com/effect/index.html

I heard about the speculation about them being true bypass but I forgot who on the forums told me it wasn't. Have you tested them without power?

[AnodBiomech]

I heard about the speculation about them being true bypass but I forgot who on the forums told me it wasn't. Have you tested them without power?

yes bro na try ko na hindi ko sinaksak VS 1Spot, guitar -> pedalboard -> amp , krengggg krenggg krenggg says the amp

[rockchops_14]

yup, me too i hereby certify that me apw3 wah is truebypass

[Musikerochan]

you gotta love those artec descriptions sa pedals nila

[progrock]

up natin to 

[dennis22opina]

Napapanahon na necro thread.. para sa mga nagtatanong tungkol sa analogs..

[09thfret]

juicy thread 

[keanu121212]

goodEve sir, ask ko lang po if sa ang Equalizer PEdal po ba is kayang gawin lahat ng tunog, kasi bibili dapat ako ng behringer GDI21 dahil nga may 3 tube amp settings siya at may mic placement. so yun nga po, kaya po ba gayahin ng EQ Pedal ang mga tunog ng differnt TUBE AMPS at MiC placement? thanx in advance sir!

[keanu121212]

goodEve sir, ask ko lang po if sa ang Equalizer PEdal po ba is kayang gawin lahat ng tunog, kasi bibili dapat ako ng behringer GDI21 dahil nga may 3 tube amp settings siya at may mic placement. so yun nga po, kaya po ba gayahin ng EQ Pedal ang mga tunog ng differnt TUBE AMPS at MiC placement? thanx in advance sir!

[guitarmaniacgino]

goodEve sir, ask ko lang po if sa ang Equalizer PEdal po ba is kayang gawin lahat ng tunog, kasi bibili dapat ako ng behringer GDI21 dahil nga may 3 tube amp settings siya at may mic placement. so yun nga po, kaya po ba gayahin ng EQ Pedal ang mga tunog ng differnt TUBE AMPS at MiC placement? thanx in advance sir!

Well, kung ako ang tatanungin, I just use an EQ pedal para hindi ko na kailangan kalikutin pa yung EQ settings ng amp. Isa pa, sa nakikita ko, para hindi mo na kailangan magdala ng amplifier kada gig just to keep the sound, just bring an EQ Pedal. Tweak the pedal until you get the right mix and play.

[Tieria]

what's your amp? get a good amp first before spending loads of cash on effect pedals.

This and after that get a decent sounding guitar before spending loads of cash on effect pedals. That way you also save more money, time and space in the long term.

[DiMarzSiao™]

goodEve sir, ask ko lang po if sa ang Equalizer PEdal po ba is kayang gawin lahat ng tunog, kasi bibili dapat ako ng behringer GDI21 dahil nga may 3 tube amp settings siya at may mic placement. so yun nga po, kaya po ba gayahin ng EQ Pedal ang mga tunog ng differnt TUBE AMPS at MiC placement? thanx in advance sir!

Hindi., pero nakatutulong ito sa pag "timpla" ng tunog.

[newbee123]

Help naman po mga sir,

pwede ko po bang i-chain ang multi-effects like Boss ME 70 sa boss at artec pedals? balak ko kasing gamitin yung delay ng me 70..papano po ba ang connection nila? di ba makakasira sa isat isa yun?

any suggestions and reply is highyly appreciated..

salamat po!

[Vantage]

All good pedals posted here so far BUT,

Since you're just staring out, my suggestion para sayo is get a good amp first. Get a modeling amp like a Vox AD15VT - you can get different shades of ODs/distortions and modulation pedals all emulated in one amp. You can potentially avoid wasting a ton of money on effects you'll never need.

Although if you insist on getting a pedal, I recommend the DS-2 since that can cover both ends of distortion spectrum pretty well.

Help naman po mga sir,

pwede ko po bang i-chain ang multi-effects like Boss ME 70 sa boss at artec pedals? balak ko kasing gamitin yung delay ng me 70..papano po ba ang connection nila? di ba makakasira sa isat isa yun?

any suggestions and reply is highyly appreciated..

salamat po!

Yes, but you'll want them in the end of the chain and it's better if you have there's a way to a way to have direct amp or amp model bypass.

Guitar -> Stombpoxes -> ME-70 -> Amp

Some people say it's better to have it before certain time-based effects, but I don't know anything about that. (You can disregard this last sentence if you don't have any time-based stompboxes)

EDIT: WOAH. Cleaning up I see.

[newbee123]

salamat po sir vantage! BTW I'm using Marshall MA50C tube amp...

[keanu121212]

help naman po mga sir,
may pedal akong nabili ko for 500, DOD Equalizer pedal po sya, kso, pag sinasaksak ko, umiilaw lang siya, pero pag mjo nilakasan mo yung volume ng amp, madidinig mo na may tunog pero napakahina talaga, then naisip ko baka hindi sira, pero tinry ko timplahin, wala, ganon padin yung tunog, ano po kaya problema ng pedal na ito?

[Vantage]

help naman po mga sir,
may pedal akong nabili ko for 500, DOD Equalizer pedal po sya, kso, pag sinasaksak ko, umiilaw lang siya, pero pag mjo nilakasan mo yung volume ng amp, madidinig mo na may tunog pero napakahina talaga, then naisip ko baka hindi sira, pero tinry ko timplahin, wala, ganon padin yung tunog, ano po kaya problema ng pedal na ito?

• Chip failed/fried
• Soldering issue?

I wish I could be of more help.

salamat po sir vantage! BTW I'm using Marshall MA50C tube amp...

You're most welcome. Hindi na kailangan ng sir, bata pa ako! That amp's plenty loud!

[keanu121212]

• Chip failed/fried
• Soldering issue?

nakatulong po sir! thanks! pero di ko padin ata to maaayos kung ganon, nagtry na ko baklasin pero sa nakita ko sa loob, parang wala nmng nasunog or what. Di ko talaga alam, sayang pera. hahaha

btw. to all, ano maganda gawin sa DOD compressor sustainer? hehehe . any suggestion ? thanx! [/list]

[keanu121212]

• Chip failed/fried
• Soldering issue?

nakatulong po sir! thanks! pero di ko padin ata to maaayos kung ganon, nagtry na ko [pichapie] pero sa nakita ko sa loob, parang wala nmng nasunog or what. Di ko talaga alam, sayang pera. hahaha

btw. to all, ano maganda gawin sa DOD compressor sustainer? hehehe . any suggestion ? thanx! [/list]

[ninjahcool19]

GOOD DAY!
I HAVE A SHORT QUESTION LANG PO
BALE MY PEDAL SETUP IS LIKE THIS
GUITAR>ME-50(where I get the tone, noise gate, comp, and distortion)>M13(where I get the equalizer, modulation, delays, and reverb)>AMP
1. Is it right to put a multi-effects like me-50 after M13?
2. Will the ME-50 Work with M13?
Thanks! Any comments/suggestions will be appreciated.

[Poundcake]

GOOD DAY!
I HAVE A SHORT QUESTION LANG PO
BALE MY PEDAL SETUP IS LIKE THIS
GUITAR>ME-50(where I get the tone, noise gate, comp, and distortion)>M13(where I get the equalizer, modulation, delays, and reverb)>AMP
1. Is it right to put a multi-effects like me-50 after M13?
2. Will the ME-50 Work with M13?
Thanks! Any comments/suggestions will be appreciated.

1. There are no absolute rights or wrongs in effects routing since application and desired output tone will always be the primary considerations, but cascading two digital multi-effects won't bring out the best in your guitar's tone. The output of the ME-50 is basically a digitized approximation of your guitar's original tone with the added effects, which will then be digitized by the M13 yet again. Generally, double digitization isn't a very good idea.

2. If by "work," you mean it will actually function and you'll get the effects sequence that you'd want, then yes. But as far as getting the best tone that you can squeeze out of your rig, not so much.

My suggestion is to set up an all-analog preamp/dirt section and use one of your multi-effects (preferably the M13) for your modulation, time-based and reverb effects.

[ninjahcool19]

1. There are no absolute rights or wrongs in effects routing since application and desired output tone will always be the primary considerations, but cascading two digital multi-effects won't bring out the best in your guitar's tone. The output of the ME-50 is basically a digitized approximation of your guitar's original tone with the added effects, which will then be digitized by the M13 yet again. Generally, double digitization isn't a very good idea.

2. If by "work," you mean it will actually function and you'll get the effects sequence that you'd want, then yes. But as far as getting the best tone that you can squeeze out of your rig, not so much.

My suggestion is to set up an all-analog preamp/dirt section and use one of your multi-effects (preferably the M13) for your modulation, time-based and reverb effects.

Thank Your Sir! Will sell my me-50 for the dirt/preamp sounds nalang Your advice helped me a lot. Thanks!