TALK @ PhilMusic.com - The Online Home of the Pinoy Musician
The Musician Forums => Guitar Central => Topic started by: Poundcake on June 23, 2006, 06:40:50 PM
Title: Post your pedalboard chain routing here!
Post by: Poundcake on June 23, 2006, 06:40:50 PM
ewan ko lang kung may topic nang ganito dito.. post nyo lang yung routing ng effects chain ninyo! pwedeng text-based lang, pwedeng may diagram, etc. share tayo ng mga setups para may new ideas tayong makuha about pedal sequences, etc. especially from the pedal gurus (and geeks). madami kasing mga newer forumites dito na laging nagtatanong ng mga questions e, so magandang ma-browse na lang nila tong thread na to for them to use as reference :)
Title: Re: Post your pedalboard chain routing here!
Post by: spunk'd on June 23, 2006, 06:45:06 PM
MAY TANONG AKO MGA KUYA... KASI MERON AKONG GNX4, DS-1, DD-3, BADMONKEY. BALAK KO PA BUMILI NG EQ...
MERON AKO DATI NG MGA PEDALS NA REVERB, TREMOLO, AC-3, PERO NABENTA KO NA.. :D
PAANO KO BA ITO AAYUSIN NG MAGANDA... LIGHT ROCK LANG TUGTUG KO. SEMI-ALTERNATIVE...
SA TUTUG KO, MAY KULANG PA BA AKO SA SETUP? DI AKO NAG LLEAD.
Title: Re: Post your pedalboard chain routing here!
Post by: Poundcake on June 23, 2006, 06:50:22 PM
Quote from: spunk'd
MAY TANONG AKO MGA KUYA... KASI MERON AKONG GNX4, DS-1, DD-3, BADMONKEY. BALAK KO PA BUMILI NG EQ...
MERON AKO DATI NG MGA PEDALS NA REVERB, TREMOLO, AC-3, PERO NABENTA KO NA.. :D
PAANO KO BA ITO AAYUSIN NG MAGANDA... LIGHT ROCK LANG TUGTUG KO. SEMI-ALTERNATIVE...
SA TUTUG KO, MAY KULANG PA BA AKO SA SETUP? DI AKO NAG LLEAD.
pwede mong gawing: Bad Monkey >> DS-1 >> GNX4 (for modulations + light delay) >> DD-3. na-try ko na yang cascaded delay pedals, perfect yan for ambient rhythm guitar (e.g. U2, Sigur Ros, etc.). yung EQ ilagay mo either before the Bad Monkey or after the DS-1, depende sa taste mo :)
Title: Re: Post your pedalboard chain routing here!
Post by: spunk'd on June 23, 2006, 06:53:58 PM
MODULATIONS, YUNG MGA CHORUS NA EFFECT BA YUN? SIGE KUYA, ITTRY KO MAMAYA. SALAMAT.
EH KUNG WALA YUNG GNX4? PAANO UNG SETUP NUN? KUNYARI ANALOG LANG GAMITIN KO...
DI NAMAN HEAVEY YUNG MGA TUGTUG KO, KAILANGAN KO PA BA NG NOISE SUPPRESOR? (DI KO ALAM SPELLING... :lol: )
Title: Re: Post your pedalboard chain routing here!
Post by: pallas on June 23, 2006, 07:36:32 PM
Quote from: spunk'd
MODULATIONS, YUNG MGA CHORUS NA EFFECT BA YUN? SIGE KUYA, ITTRY KO MAMAYA. SALAMAT.
EH KUNG WALA YUNG GNX4? PAANO UNG SETUP NUN? KUNYARI ANALOG LANG GAMITIN KO...
DI NAMAN HEAVEY YUNG MGA TUGTUG KO, KAILANGAN KO PA BA NG NOISE SUPPRESOR? (DI KO ALAM SPELLING... :lol: )
pwede ring liitan mo letra mo para ok 8)
Title: Re: Post your pedalboard chain routing here!
Post by: spunk'd on June 23, 2006, 07:38:56 PM
Quote from: pallas
Quote from: spunk'd
MODULATIONS, YUNG MGA CHORUS NA EFFECT BA YUN? SIGE KUYA, ITTRY KO MAMAYA. SALAMAT.
EH KUNG WALA YUNG GNX4? PAANO UNG SETUP NUN? KUNYARI ANALOG LANG GAMITIN KO...
DI NAMAN HEAVEY YUNG MGA TUGTUG KO, KAILANGAN KO PA BA NG NOISE SUPPRESOR? (DI KO ALAM SPELLING... :lol: )
pwede ring liitan mo letra mo para ok 8)
AHEHEHEHE.. EPS
Title: Re: Post your pedalboard chain routing here!
Post by: vhunter on June 23, 2006, 07:46:16 PM
Sali ako :)
when i use my board its usually pedals only Tuner ---> Compressor ----> wah---->dist1 ---> (usually tube screamer) ----> chorus----> delay----> clean boost ------->amp
When amp i use teh same but stick the amp in the dist 1/tubescreamer area and run the rest thru the loop.... if i feel like bringing extra gear i put a volume pedal before everything.
Fav setup is still guitar ----> amp
Title: Re: Post your pedalboard chain routing here!
Post by: Chito on June 23, 2006, 08:54:10 PM
I'll join in. I use pedals all the time and my basic setup normally goes like this:
mxr micro amp > big muff pi > boss ds2 > ibanez wf10 > mxr phase 90 > boss ce 5 > amp :)
Title: Re: Post your pedalboard chain routing here!
Post by: nivleklive on June 23, 2006, 10:36:41 PM
Ibańez AR250 - Ibańez Weeping Demon - Korg GT12 (tuner)- Boss SD1 - Boss DS2 - Boss CE5 - Marshall VibraTrem - Boss RV3 - amp
I'm thinking of replacing the vibratrem with a TR2... still can't get used to the switch :(
Title: Re: Post your pedalboard chain routing here!
Post by: haey2 on June 24, 2006, 12:04:33 AM
after all the pedals that i bought and sold...eto na lang ang itinira ko dahil ito rin naman yun plagi ko ginagamit kahit na anong tugtugan eh...hehehe...
and this always works...less hassle pa...kasya pa sa backpack yun pedalboard ko...hehehe...
8) 8) 8)
Title: Re: Post your pedalboard chain routing here!
Post by: Chito on June 24, 2006, 12:08:33 AM
Quote from: vhunter
chito why compressor after wah?
At the moment, it is just a matter of convenience to put it after the Wah pedal on my board. I didn't want to have the wah right in the middle of board and just wanted to have the small size effects together. And since I don't normally have the compressor going when I am using the Wah, I figured it wouldn't matter having the compressor after it.
But normally, it is advisable to have the compression pedal before anything else.
Title: Re: Post your pedalboard chain routing here!
Post by: namida on June 24, 2006, 12:19:08 AM
Sir Chito, hows the fulltone ocd? (Sorry OT)
Title: Re: Post your pedalboard chain routing here!
Post by: Chito on June 24, 2006, 12:57:50 AM
Sorry for the OT.
Quote from: namida
Sir Chito, hows the fulltone ocd? (Sorry OT)
I've had it for about a month or so and I have been able to A/B it with a Keeley DS-1 Ultra, Tonebone Classic, BD-2, SD-1, DS-1(stock) and here's my opinion about the OCD:
1. It's very quiet for an Overdrive/Distortion pedal 2. It's as close to a rich and warm "tube" sound than any other SS pedal I've used 3. Pick attack is really good, better than the Keeley modded DS-1 but not as good as the Tonebone Classic or plugging directly to an overdriven tube amp 4. Very versatile too, it can go from a smooth light overdrive to heavy chunky rhythm without the mud or harshness.
BTW, I have only used it with my amps both are tubes and I have not used it in a gig yet. At the moment, I use it as my mild medium gain pedal.
If I have to get rid of all my OD/Dist pedals, it would be a toss up between the Tonebone and the OCD.
Title: Re: Post your pedalboard chain routing here!
Post by: ejbasses on June 24, 2006, 02:28:37 AM
Title: Re: Post your pedalboard chain routing here!
Post by: markflo on June 24, 2006, 02:32:02 AM
this routing took me months to figure out and i'm glad all my hard work and sleepless nights paid off! hehe...it's unlike most setups because it splits my signal throughout the chain and recombines them to be used in only 1 amp! so here it goes...
tu output 1----> rc booster ---->arion chorus----> sida A of AB1 tu output 2----> splitter
splitter 1--->tubeworks tube driver--->side A of AB2 splitter 2--->jt pedal's valveboy--->side B of AB2
output of AB2 --->side B of AB1
AB1--->Boss DD-20--->BBE Sonic Stomp
rimimbur! no kafeeying!!! hehe...you saw it here first! hehehe
Title: Re: Post your pedalboard chain routing here!
Post by: skunkyfunk on June 24, 2006, 02:50:32 AM
Sa akin:
gtr-->V848-->Visual Sound J&H-->Marshall Drivemaster-->amp-->FX loop out-->Dano Fish&Chips-->Ibanez DE7--FX loop in
Title: Re: Post your pedalboard chain routing here!
Post by: spankyrigor on June 24, 2006, 07:59:48 AM
question.
i have this in my FX loop:
CH1 >> DD5 >> Danelecto flanger
kung maglalagay ako ng vibrato & tremolo pedal (2 separate pedals) where should i stick em? tamad pako mag-tweak eh.. :)
spunk'd:
there's no RIGHT way to string your pedals together, but there's one suggested way to put them together for the clearest sound, after getting to know what each effect actually does to your tone. (check the internet, o kaya mag-search ka sa older threads) basically gain effects first, time-based & modulation effects after. so it doesn't really matter what type of music you play. use what works for you.
Title: Re: Post your pedalboard chain routing here!
Post by: skunkyfunk on June 24, 2006, 08:08:29 AM
Quote from: spankyrigor
question.
i have this in my FX loop:
CH1 >> DD5 >> Danelecto flanger
kung maglalagay ako ng vibrato & tremolo pedal (2 separate pedals) where should i stick em? tamad pako mag-tweak eh.. :)
spunk'd:
there's no RIGHT way to string your pedals together, but there's one suggested way to put them together for the clearest sound, after getting to know what each effect actually does to your tone. (check the internet, o kaya mag-search ka sa older threads) basically gain effects first, time-based & modulation effects after. so it doesn't really matter what type of music you play. use what works for you.
Speaking of no rules on chaining pedals, I saw a post here asking what pedal can he buy to boost a Metal Zone. :lol:
Title: Re: Post your pedalboard chain routing here!
Post by: akosimic on June 24, 2006, 08:47:18 AM
heres a link from the boss website on chaining of fx.
though im looking into adding a delay and chorus when i have enough resources.
Quote from: spankyrigor
question.
i have this in my FX loop:
CH1 >> DD5 >> Danelecto flanger
kung maglalagay ako ng vibrato & tremolo pedal (2 separate pedals) where should i stick em? tamad pako mag-tweak eh.. :)
spunk'd:
there's no RIGHT way to string your pedals together, but there's one suggested way to put them together for the clearest sound, after getting to know what each effect actually does to your tone. (check the internet, o kaya mag-search ka sa older threads) basically gain effects first, time-based & modulation effects after. so it doesn't really matter what type of music you play. use what works for you.
Title: Re: Post your pedalboard chain routing here!
Post by: Poundcake on June 24, 2006, 09:21:24 AM
Quote from: skunkyfunk
Sa akin:
gtr-->V848-->Visual Sound J&H-->Marshall Drivemaster-->amp-->FX loop out-->Dano Fish&Chips-->Ibanez DE7--FX loop in
pare, musta yung J&H at Drivemaster cascaded? i haven't used both yet e.. :)
Title: Re: Post your pedalboard chain routing here!
Post by: tumorwarrior on June 24, 2006, 09:23:40 AM
sa kin,
Guitar --> DS1 Ultra --> CH1 --> amp
di ko alam kung kailangan ko pa ng compressor eh :lol: pero malamang dagdagan ko pa ng BSIAB II. di ko kaya madami pedals, baka mabaliw ako pag more than 4 ang aapakan ko hahaha
Title: Re: Post your pedalboard chain routing here!
Post by: Poundcake on June 24, 2006, 09:50:35 AM
medyo magulo yung isang pedalboard ko, kaya eto na lang yung diagram (ganito talaga pag nababato sa tate):
yung output ng Memory Man ipapasok ko sa AB Switch 2 (B). from the output of the 2nd AB switch, punta na sa Sonic Stomp. it looks complex pero sobrang dali lang gamitin ng board ko kasi yung dalawang AB switch lang ang controls, always on na karamihan ng pedals. salamat sa www.guitargeek.com Eric Johnson setup at kay markflo for the TU-2 split technique!
Title: Re: Post your pedalboard chain routing here!
Post by: hamsterjamster on June 24, 2006, 03:47:36 PM
sir di ba dapat sa huli ang delay to get the most out of the repeated signals na nagegenerate ng delay? or may mix ka na effective yang DD-3 >> BF2? :)
Title: Re: Post your pedalboard chain routing here!
Post by: renz_sui on June 24, 2006, 10:31:00 PM
I tried switching them pero halos wala rin pinagkaiba. Sinundan ko lang yung pattern ng Multi FX k dati. Ganyan yung setup niya IIRC.
Title: Re: Post your pedalboard chain routing here!
Post by: pallas on June 24, 2006, 10:33:40 PM
sir di ba dapat sa huli ang delay to get the most out of the repeated signals na nagegenerate ng delay? or may mix ka na effective yang DD-3 >> BF2? :)
keeley-fied siguro dd3 nya at nasa loop yung flange?
Title: Re: Post your pedalboard chain routing here!
Post by: Poundcake on June 24, 2006, 10:46:25 PM
pareng pallas, maybe.. either that or subtle delay lang ang setting at di talaga malaki ang effect nun. pag medyo mataas na kasi yung level and feedback setting medyo nasasapawan ng flange sweep yung delay e, tipong yung mahinang echo from the delay naa-amplify nung flanger pag sumakto sa high-frequency sweep and vice versa. oh well, it works for sir renz_sui e :)
Quote from: spankyrigor
question.
i have this in my FX loop:
CH1 >> DD5 >> Danelecto flanger
kung maglalagay ako ng vibrato & tremolo pedal (2 separate pedals) where should i stick em? tamad pako mag-tweak eh.. :)
pre, depende sa gusto mong effect ng vibrato/tremolo mo. kung gusto mong malupit yung tremolo, ilagay mo yan sa huli. yung buong signal na naprocess nung loop mo sasalain ng tremolo yun. otherwise, ilagay mo sya before the effect na gusto mong maging "dominant" (yung "dominant" effect is yung ilalagay sa huli). example, kung gusto mong yung subtle tremolo/vibrato eh tumaba yung timpla before ma-echo, pwedeng: vib/trem >> CH-1 >> DD-5. yan ang masaya sa modulation pedals, madaming possibilities na magagawa sa pagsequence :)
Title: Re: Post your pedalboard chain routing here!
Post by: renz_sui on June 25, 2006, 09:53:03 AM
Quote from: Poundcake
pareng pallas, maybe.. either that or subtle delay lang ang setting at di talaga malaki ang effect nun. pag medyo mataas na kasi yung level and feedback setting medyo nasasapawan ng flange sweep yung delay e, tipong yung mahinang echo from the delay naa-amplify nung flanger pag sumakto sa high-frequency sweep and vice versa. oh well, it works for sir renz_sui e :)
Yeah subtle nga lang. Panglagay lang ng slight reverb sa tunog ko. Tsaka usually d ko naman napagsasabay yung dalawa (Unless I go trippy on effects)
Title: Re: Post your pedalboard chain routing here!
Post by: blue_raven on June 25, 2006, 06:28:44 PM
here's my set-up:
guitar -> gcb95 -> boss cs3 -> marshall shredmaster -> boss od3 -> boss ch1 -> digitech digidelay -> amp
:P
Title: Re: Post your pedalboard chain routing here!
Post by: leech on June 25, 2006, 06:41:52 PM
i only use the POD + FB for the covers band where i need more mod effects or when i'd rather have one patch per song rather than stomping on 2-3 pedals and tweaking knobs between each song.
:D
Title: Re: Post your pedalboard chain routing here!
Post by: Poundcake on June 26, 2006, 10:21:11 AM
Quote from: five3one
dapat ba tlga after guitar yung ns-2? dami ko natututunan dito! hehe
pare, ang pinaka-preferred placement ng noise suppressor is anywhere before magkaroon ng kahit anong tone-shaping/distortion/modulation kasi ang gusto nating mangyari dyan is hindi mahirapan yung suppressor mag-identify ng hum sa pure guitar signal for maximum efficiency sa suppression. for example, pag nilagay mo yung suppressor right after your distortion pedals, the suppressor would have a harder time distinguishing between the distorted signals and hum. kung nakita mo yung unang board ko (balahurang setup: 13 pedals nakaseries lahat=major tone sucking!) inuna ko yung wah before the noise gate.. ang nangyari tuloy was yung malakas na hum na lumalabas sa '54 SC pickups ko lalong napapalakas pa nung wah pag ginagamit ko tapos hindi mafilter out ng suppressor coz altered na yung tunog ng guitar signal e, parang nag-"blend in" na yung hum kaya di na madistinguish :)
Title: Re: Post your pedalboard chain routing here!
Post by: Poundcake on June 26, 2006, 10:26:04 AM
i only use the POD + FB for the covers band where i need more mod effects or when i'd rather have one patch per song rather than stomping on 2-3 pedals and tweaking knobs between each song.
:D
nice setup, man.. nakakatuwa talaga makakita ng hybrid analog/digital/modeler setup, it gives the musician the chance to use the advantages of both technologies. yung drive mo ba yung TS-9 + booster lang? have you tried cascading two Tube Screamers na rin, one as your booster? galing ng tone pare, try mo rin :)
Title: Re: Post your pedalboard chain routing here!
Post by: five3one on June 26, 2006, 10:50:21 AM
Quote from: Poundcake
Quote from: five3one
dapat ba tlga after guitar yung ns-2? dami ko natututunan dito! hehe
pare, ang pinaka-preferred placement ng noise suppressor is anywhere before magkaroon ng kahit anong tone-shaping/distortion/modulation kasi ang gusto nating mangyari dyan is hindi mahirapan yung suppressor mag-identify ng hum sa pure guitar signal for maximum efficiency sa suppression. for example, pag nilagay mo yung suppressor right after your distortion pedals, the suppressor would have a harder time distinguishing between the distorted signals and hum. kung nakita mo yung unang board ko (balahurang setup: 13 pedals nakaseries lahat=major tone sucking!) inuna ko yung wah before the noise gate.. ang nangyari tuloy was yung malakas na hum na lumalabas sa '54 SC pickups ko lalong napapalakas pa nung wah pag ginagamit ko tapos hindi mafilter out ng suppressor coz altered na yung tunog ng guitar signal e, parang nag-"blend in" na yung hum kaya di na madistinguish :)
thanks sir!! ayos itong thread na ito.. hehe
Title: Re: Post your pedalboard chain routing here!
Post by: sonnyrayvaughn on June 26, 2006, 08:05:19 PM
Setup 1) pag tinamad eto set up: Guitar > modded SD1 > Boss DD3 > Amp - gamit ko rin yung OD at Dist channel ng amp ko kung dala ko.
Setup 2) pag sinipag ako magdala sa gig:
Guitar > Duncan Pickup booster > Bad horsie wah > MXR super com > Tonebone Classic Dist > Bad monkey > EH Small Clone > Boss DD3 > BBE Sonic Stomp > Amp
Setup 3) pag sinipag talaga ako ng husto:
Guitar > Duncan Pickup booster > Bad horsie wah > MXR super com > splitter/switch > 1) Tonebone Classic Dist > Bad monkey > 2) Boss DS1 > Modded SD1 > BBE Sonic Stomp > Amp EH Small Clone > Boss DD3 > Boss GE7 in the effects loop
Usually setup 2 ang gamit ko...pag impromptu jams gamit ko setup 1, yung setup 3, madalang, only kung kami lang ang bandang mag play on that gig.
Title: Re: Post your pedalboard chain routing here!
Post by: Poundcake on June 26, 2006, 11:59:00 PM
Quote from: sonnyrayvaughn
Setup 1) pag tinamad eto set up: Guitar > modded SD1 > Boss DD3 > Amp - gamit ko rin yung OD at Dist channel ng amp ko kung dala ko.
Setup 2) pag sinipag ako magdala sa gig:
Guitar > Duncan Pickup booster > Bad horsie wah > MXR super com > Tonebone Classic Dist > Bad monkey > EH Small Clone > Boss DD3 > BBE Sonic Stomp > Amp
Setup 3) pag sinipag talaga ako ng husto:
Guitar > Duncan Pickup booster > Bad horsie wah > MXR super com > splitter/switch > 1) Tonebone Classic Dist > Bad monkey > 2) Boss DS1 > Modded SD1 > BBE Sonic Stomp > Amp EH Small Clone > Boss DD3 > Boss GE7 in the effects loop
Usually setup 2 ang gamit ko...pag impromptu jams gamit ko setup 1, yung setup 3, madalang, only kung kami lang ang bandang mag play on that gig.
pareng Sonny, ang daming cascades ah.. bangis siguro ng tunog ng Tonebone + Bad Monkey hehe :) ano amp mo pre?
Title: Re: Post your pedalboard chain routing here!
Post by: leech on June 27, 2006, 12:10:36 AM
Poundcake wrote:
Quote
huwaaaaw! ang titindi ng pedals mo man.. yan ba ang fruits of your latest GAS sa US? ano, nabili mo na ba yung 6505+ head? hehe
oo pare!! hehe!! yung 6505+ head dito ko nalan bibilhin..... bka magkamali ng saksak d2 eh mag-KKKAAABBOOOOOM!! :D
Title: Re: Post your pedalboard chain routing here!
Post by: sonnyrayvaughn on June 27, 2006, 12:31:08 AM
Quote from: Poundcake
Quote from: sonnyrayvaughn
Setup 1) pag tinamad eto set up: Guitar > modded SD1 > Boss DD3 > Amp - gamit ko rin yung OD at Dist channel ng amp ko kung dala ko.
Setup 2) pag sinipag ako magdala sa gig:
Guitar > Duncan Pickup booster > Bad horsie wah > MXR super com > Tonebone Classic Dist > Bad monkey > EH Small Clone > Boss DD3 > BBE Sonic Stomp > Amp
Setup 3) pag sinipag talaga ako ng husto:
Guitar > Duncan Pickup booster > Bad horsie wah > MXR super com > splitter/switch > 1) Tonebone Classic Dist > Bad monkey > 2) Boss DS1 > Modded SD1 > BBE Sonic Stomp > Amp EH Small Clone > Boss DD3 > Boss GE7 in the effects loop
Usually setup 2 ang gamit ko...pag impromptu jams gamit ko setup 1, yung setup 3, madalang, only kung kami lang ang bandang mag play on that gig.
pareng Sonny, ang daming cascades ah.. bangis siguro ng tunog ng Tonebone + Bad Monkey hehe :) ano amp mo pre?
cool na cool yung Tonebone...very versatile na distortion. yung BM, pangboost lang or kung kelangan lang ng little touch of OD...
Amp ko is a Traynor YCV80Q..tube amp na pang-masa.
ikaw ang kahanga-hanga ang gears pareng Poundcake!
Title: Re: Post your pedalboard chain routing here!
Post by: Poundcake on June 27, 2006, 01:08:55 AM
hehe di naman.. just fortunate enough to have enough GAS money at the right place at the right time. at iba-iba ang setup natin kaya ko nga naisipang i-start tong thread na to e, so i also want to appreciate the pedal setups of the other forumites here :)
hmmm that gives me an idea, post kaya tayo ng guitar tone sound clips natin dito? para may audio reference din tayo sa mga different setups (although yes, may effect ang recording.. just for kicks). game kayo?
Title: Re: Post your pedalboard chain routing here!
Post by: Extremist777 on August 29, 2006, 09:44:38 PM
Title: Re: Post your pedalboard chain routing here!
Post by: five3one on August 29, 2006, 09:50:48 PM
badmonkey-----ds-1-----dd-3 lang.. hehe di ko alam saan ko ilalagay hanggang ngayon ang gnx3000... at kung bumili ako ng metal stomp (metal zone, metal master, death metal, boston [hahaha!])malamang di ko na naman alam saan ang pwesto nun. :lol:
Title: Re: Post your pedalboard chain routing here!
Post by: Extremist777 on August 29, 2006, 09:58:25 PM
Quote from: five3one
badmonkey-----ds-1-----dd-3 lang.. hehe di ko alam saan ko ilalagay hanggang ngayon ang gnx3000... at kung bumili ako ng metal stomp (metal zone, metal master, death metal, boston [hahaha!])malamang di ko na naman alam saan ang pwesto nun. :lol:
Oks ba yung GNX3000? May POD XT Live din ako.. pero pag gamit ko yun wala ng ibang nakadikit don. Oks na yun na ganon lang.
Title: Re: Post your pedalboard chain routing here!
Post by: akosimic on August 29, 2006, 10:03:12 PM
i think may ganitong thread na. :D
Title: Re: Post your pedalboard chain routing here!
Post by: lykenhowl on August 29, 2006, 10:50:24 PM
Sa kin ang dami pang kulang:
Badmonkey->DS1->MT2->Chorus->EQ
Kulang pa ko ng Wah and delay.
Title: Re: Post your pedalboard chain routing here!
Post by: ayofish on August 29, 2006, 11:03:44 PM
tsong advice lng
dnt add ds1 to mt2 kasi over sagad na sound nya not advisable kasi may kasama pa na bad monkey
pwede bad monkey+ mt2 hehehhehe ayos rin magdagdag ka eq seryoso ehhehehe lilinis ung sound sobra!!!!
setup ko
od/dist + mt2 + eq + chorus + digital delay3
eehehhe ayos tunog sobrang crunchy tapos swabe ung tunog at the same time ..pwede sha pang leads kasi rinig lahat ng notes swabe hehehhe tapos d ka magiingay mashado kasi onting gain lng gagamitin mo sa mt2 ehheeh kapal ng sound dahil sa eq hehehe ala lng
and yes may ganito nang thread ehheheh
Title: Re: Post your pedalboard chain routing here!
Post by: lykenhowl on August 29, 2006, 11:11:08 PM
Quote from: ayofish
tsong advice lng
dnt add ds1 to mt2 kasi over sagad na sound nya not advisable kasi may kasama pa na bad monkey
pwede bad monkey+ mt2 hehehhehe ayos rin magdagdag ka eq seryoso ehhehehe lilinis ung sound sobra!!!!
setup ko
od/dist + mt2 + eq + chorus + digital delay3
eehehhe ayos tunog sobrang crunchy tapos swabe ung tunog at the same time ..pwede sha pang leads kasi rinig lahat ng notes swabe hehehhe tapos d ka magiingay mashado kasi onting gain lng gagamitin mo sa mt2 ehheeh kapal ng sound dahil sa eq hehehe ala lng
and yes may ganito nang thread ehheheh
Di ko naman pinagsasabay eh, either BM and DS1 lang or BM and MT2. Pag nakaon kasi lahat ang lakas na ng hum.
Title: Re: Post your pedalboard chain routing here!
Post by: ayofish on August 29, 2006, 11:14:31 PM
hehehe sori tsong my bad anyway
ala lng angas nyan badmonkey + mt2 [gooey brown stuff] pwedeng over high gain na rough or over smooth na hard dist lng [gooey brown stuff] man!!!!
Title: Re: Post your pedalboard chain routing here!
Post by: abyssinianson on August 29, 2006, 11:30:14 PM
amps--Digital Music Corp GCX Switcher<RC Booster (soon), Fulltone Fulldrive, Fulltone supa trem, Diamond Memory Lane Delay, Fulltone ChoralFlange, Keeley compressor, Fulltone Deja Vibe Mini, Fulltone 70s pedal,>DMC Ground Control Pro--Fulltone Clyde Wah--Guitar
I put pedals in, and take them out periodically. I used to have a BBE sonic maximizer but I sold that to get the RC Booster, and soon, the Choralflange will be on its way out to be replaced by a Red Witch Chorus pedal.
Title: Re: Post your pedalboard chain routing here!
Post by: Extremist777 on August 29, 2006, 11:35:39 PM
Quote from: abyssinianson
amps--Digital Music Corp GCX Switcher<RC Booster (soon), Fulltone Fulldrive, Fulltone supa trem, Diamond Memory Lane Delay, Fulltone ChoralFlange, Keeley compressor, Fulltone Deja Vibe Mini, Fulltone 70s pedal,>DMC Ground Control Pro--Fulltone Clyde Wah--Guitar
I put pedals in, and take them out periodically. I used to have a BBE sonic maximizer but I sold that to get the RC Booster, and soon, the Choralflange will be on its way out to be replaced by a Red Witch Chorus pedal.
Wow! Nice pedals man! How much did you pay for the DIAMOND MEMORY LANE? I heard they are excellent.
Title: Re: Post your pedalboard chain routing here!
Post by: stratman1 on August 29, 2006, 11:43:56 PM
Quote from: abyssinianson
amps--Digital Music Corp GCX Switcher<RC Booster (soon), Fulltone Fulldrive, Fulltone supa trem, Diamond Memory Lane Delay, Fulltone ChoralFlange, Keeley compressor, Fulltone Deja Vibe Mini, Fulltone 70s pedal,>DMC Ground Control Pro--Fulltone Clyde Wah--Guitar
I put pedals in, and take them out periodically. I used to have a BBE sonic maximizer but I sold that to get the RC Booster, and soon, the Choralflange will be on its way out to be replaced by a Red Witch Chorus pedal.
Hhmm... so, abby, gusto mo ba ang Fulltone products :?: :lol:
Tanong lang, meng. Musta ang Keeley comp? Ayos ba? Pareho ba ang work ng Sonic BBE at RC Booster?
Title: Re: Post your pedalboard chain routing here!
Post by: Chito on August 30, 2006, 12:28:28 AM
PRS Soapbar SE II --> George Dennis Wah Plus --> GoudieFX Compressor --> Tonebone Classic --> Fulltone OCD --> Boss BD-2 --> Boss CH-1 --> Boss DD3 --> EB Volume pedal --> Fender The Twin/Fender Princeton Reverb II/Peavey Classic 30
Fulltone OCD will soon be replaced with a Home Brew Electronics Power Screamer. I just traded the OCD straight up and the HBE will be arriving in 2 days! :)
Title: Re: Post your pedalboard chain routing here!
Post by: lykenhowl on August 30, 2006, 12:51:05 AM
Quote from: ayofish
hehehe sori tsong my bad anyway
ala lng angas nyan badmonkey + mt2 [gooey brown stuff] pwedeng over high gain na rough or over smooth na hard dist lng [gooey brown stuff] man!!!!
muntik ko na ngang ibenta MT2 ko noon pero nung sinabay ko sa badmonkey mas gumanda character ng distortion niya and mas may presence.
Title: Re: Post your pedalboard chain routing here!
Post by: abyssinianson on August 30, 2006, 01:21:28 AM
@extremeist: medyo mahal ang Memory Lane pero it was worth saving up for it. I am a huge fan sa delay tone no edge from U2 and this was the smoothest delay I heard that could get me close to his "Streets With No Name" delay sound. Nakuha ko for $380.
@Stratman: bwahaha! yeah, parang ganoon ano? it just happened to work that way since nagugustohan ko yung mga products ni Mike (Fuller). My first fulltone was the fulldrive and i've been a fan ever since.
The keeley comp works very well, especially with single coils. It is not like the BBE or the RC ( i think) because it does not increase your tone nuance,rather, it just evens it out and highlights what your amp and guitar already has going for it. When the Keely comp is on, ang attack ng strings are very even (as it should sound), has a lot of musical character to it, and everytime I play with the pedal, the sound makes me want to play SRV's "Lenny." The first thing you notice is defintiely how the harmonics of the strings, amp, and guitar are more noticeable. The RC Booster is still en route to me as of yesterday so I should get it some time this week. I was asking around about the RC Booster and it seems like it is a booster very much like the BBE Maximizer except that it boosts your guitar signal adding more nuance to it, whereas the BBE just clarifies your signal and doesn't do a lot to the character of your guitar signal per se. I figure, since the RC has 4 bands to tweak with, it can do a lot more than my BBE which only has the process and lo knobs to help me scuplt sound. I don't really know what to expect from the RC based on my rig, so we will see. I would love to record stuff, unfortunately, my recording rig is right smack in the middle of a major upgrade (new mobo, drives, processor, etc).
Title: Re: Post your pedalboard chain routing here!
Post by: Extremist777 on August 30, 2006, 02:21:59 AM
Hmmm.. I am planning on buying a Moog Moogerfooger MF-104Z Analog Delay this weekend.. but I might try the Memory Lane first before I buy the Moog.. and if its the delay im looking for then I might go for the Memory Lane. =) Will save me some dough.
GAS ATTACK! lol
Title: Re: Post your pedalboard chain routing here!
Post by: abyssinianson on August 30, 2006, 03:19:25 AM
the moogerfooger is good too, it sounds different with a little bit more grit in its tone. i've used it in the past and think it matches really well with modular synths when you need a nice delay in your baseline but don't want to make it sound wishy-washy with a chorus or a reverb. if you've ever used a tape echo from roland, the moogerfooger sounds like that, i think. the memory lane is more like the older tape delay's with its warmth and nice touch on the attack of your picking. think tc electronics 2290 warm except without the pricetag and the need for rack space.
Title: Re: Post your pedalboard chain routing here!
Post by: helmetboy on August 30, 2006, 08:09:17 AM
Mga sir mejo OT, how much ung badmonkey? saka sino po manufacturer nun? sorry sa noob question :cry:
Title: Re: Post your pedalboard chain routing here!
Post by: five3one on August 30, 2006, 08:16:27 AM
bad monkey--> more or less nasa 2.8k lng... digitech may gawa.. sobrang sulit!!!!! hehehehe
Title: Re: Post your pedalboard chain routing here!
Post by: helmetboy on August 30, 2006, 08:17:26 AM
Quote from: five3one
bad monkey--> more or less nasa 2.8k lng... digitech may gawa.. sobrang sulit!!!!! hehehehe
thanks sir five, GAS attack again, :twisted:
Title: Re: Post your pedalboard chain routing here!
Post by: Poundcake on August 30, 2006, 08:23:24 AM
just removed my PS-5 and Roland EV-5, placed the Fulltone Choralflange after both dirty rhythm tone and clean tone routes.
Title: Re: Post your pedalboard chain routing here!
Post by: Poundcake on August 30, 2006, 08:27:25 AM
Quote from: Chito
PRS Soapbar SE II --> George Dennis Wah Plus --> GoudieFX Compressor --> Tonebone Classic --> Fulltone OCD --> Boss BD-2 --> Boss CH-1 --> Boss DD3 --> EB Volume pedal --> Fender The Twin/Fender Princeton Reverb II/Peavey Classic 30
Fulltone OCD will soon be replaced with a Home Brew Electronics Power Screamer. I just traded the OCD straight up and the HBE will be arriving in 2 days! :)
haha! welcome to the HBE army! you'll definitely enjoy using the Power Screamer. it's one of the most versatile overdrive pedals out there. panis ang Tube Screamer (although it is based on a vintage TS-808)!
did you get the regular model or the one with Fat Boost? :)
Title: Re: Post your pedalboard chain routing here!
Post by: les_paul_magic on August 30, 2006, 11:37:13 AM
simple lang setup ko
gibson les paul > boss me50 > bbe sonic maximizer > peavey 5150
Title: Re: Post your pedalboard chain routing here!
Post by: ayofish on August 30, 2006, 01:06:46 PM
[gooey brown stuff] angas nung isang setup!!! may diagram pa!!!! heehheheh
ala lng
Title: Re: Post your pedalboard chain routing here!
Post by: fade2black0520 on August 30, 2006, 02:54:04 PM
for me,
ibby grg/fender '54 RI ----> EHX Big Muff Pi ----> VOX Cooltron Bulldog Distortion ----> Zoom G2.1u ----> amp
saving for a crybaby wah soon to add at the start of my chain
Title: Re: Post your pedalboard chain routing here!
Post by: cumbersome on August 30, 2006, 03:06:04 PM
Guitar> TS9> DS-1> AX1500G> amp.
Pretty much covers any genre that needs to be played. But i think i'm really digging this at the moment:
Guitar> tube amp.
:)
Title: Re: Post your pedalboard chain routing here!
Post by: pallas on August 30, 2006, 03:15:58 PM
guitar+booster+od+fuzz+modulation fx+delay to amp....nothin fancy :D
Title: Re: Post your pedalboard chain routing here!
Post by: rubis915 on August 30, 2006, 04:01:08 PM
just removed my PS-5 and Roland EV-5, placed the Fulltone Choralflange after both dirty rhythm tone and clean tone routes.
W:shock:W
Title: Re: Post your pedalboard chain routing here!
Post by: Godin on August 30, 2006, 04:18:12 PM
Eto Pang mahirap na setup!
Godin SD-HB-01-Behringer DM-100-Boston OD100-GFX1-Behringer EQ7-Studio Pro II
Title: Re: Post your pedalboard chain routing here!
Post by: tony2tone on August 30, 2006, 05:21:52 PM
Setup ko Guitar(LP/Tele/Strat)-Arion Pedal Tuner-Jim Dunlop GCB-95-Ibanez TS-808-Sansamp-Classic-Behringer EQ100-Behringer Chorus CH100-Peavey StudioPro II 8)
Title: Re: Post your pedalboard chain routing here!
Post by: five3one on August 30, 2006, 05:33:54 PM
okay ba behringer eq at chorus???
kung mura at tunog rin lng ang labanan, may laban ba yung boston stomps sa behringer?
Title: Re: Post your pedalboard chain routing here!
Post by: tony2tone on August 30, 2006, 05:39:45 PM
Quote from: five3one
okay ba behringer eq at chorus???
kung mura at tunog rin lng ang labanan, may laban ba yung boston stomps sa behringer?
Ok lang naman EQ is tahimik and chorus sounds great, kaso bitin nga lang sa construction, but I would prefer the Boston kase bakal sya, mas maganda ang shielding and I read from BAMF's post na masmaganda ang materials na ginamit sa Boston kaysa BOSS or even Behringer pedals so meaning sulit na sulit talaga, moddable pa. 8)
Title: Re: Post your pedalboard chain routing here!
Post by: Chito on August 30, 2006, 05:40:07 PM
Quote from: Poundcake
Quote from: Chito
PRS Soapbar SE II --> George Dennis Wah Plus --> GoudieFX Compressor --> Tonebone Classic --> Fulltone OCD --> Boss BD-2 --> Boss CH-1 --> Boss DD3 --> EB Volume pedal --> Fender The Twin/Fender Princeton Reverb II/Peavey Classic 30
Fulltone OCD will soon be replaced with a Home Brew Electronics Power Screamer. I just traded the OCD straight up and the HBE will be arriving in 2 days! :)
haha! welcome to the HBE army! you'll definitely enjoy using the Power Screamer. it's one of the most versatile overdrive pedals out there. panis ang Tube Screamer (although it is based on a vintage TS-808)!
did you get the regular model or the one with Fat Boost? :)
It's the regular model. I just realized you have one. :) How do you like it? I thought it was a fair deal.
Title: Re: Post your pedalboard chain routing here!
Post by: stompmoko on August 30, 2006, 06:13:55 PM
Title: Re: Post your pedalboard chain routing here!
Post by: Poundcake on August 30, 2006, 06:16:20 PM
Quote from: Chito
Quote from: Poundcake
Quote from: Chito
PRS Soapbar SE II --> George Dennis Wah Plus --> GoudieFX Compressor --> Tonebone Classic --> Fulltone OCD --> Boss BD-2 --> Boss CH-1 --> Boss DD3 --> EB Volume pedal --> Fender The Twin/Fender Princeton Reverb II/Peavey Classic 30
Fulltone OCD will soon be replaced with a Home Brew Electronics Power Screamer. I just traded the OCD straight up and the HBE will be arriving in 2 days! :)
haha! welcome to the HBE army! you'll definitely enjoy using the Power Screamer. it's one of the most versatile overdrive pedals out there. panis ang Tube Screamer (although it is based on a vintage TS-808)!
did you get the regular model or the one with Fat Boost? :)
It's the regular model. I just realized you have one. :) How do you like it? I thought it was a fair deal.
yeah it's worth every penny, in my opinion. i like it a lot; it has three modes and the sag/compression factor increases as you flick the 3-ways selector switch to the right. it complements my lead tone overdrive, a Butler Tube Driver. i also tried using it as a booster to my amp's Ultra channel and it really works well :)
Title: Re: Post your pedalboard chain routing here!
Post by: bahaw on August 30, 2006, 07:14:03 PM
eto kung gus2 nyo makakuha tips sa rig setup .. http://www.guitargeek.com
search for equipments, tapos papakita nyan senyo si mga artits nagamit, tapos papakita un setup,
ok din un mga graphics sa setup,
cheers, b4h4w
Title: Re: Post your pedalboard chain routing here!
Post by: Extremist777 on August 30, 2006, 09:26:19 PM
Quote from: bahaw
eto kung gus2 nyo makakuha tips sa rig setup .. http://www.guitargeek.com
search for equipments, tapos papakita nyan senyo si mga artits nagamit, tapos papakita un setup,
ok din un mga graphics sa setup,
cheers, b4h4w
Oks yang site.. but then im interested na malaman yung mga setup ng pinoy musicians.. especially mga members ng philmusic. Salamat! :D
Title: Re: Post your pedalboard chain routing here!
Post by: Chito on August 30, 2006, 09:55:08 PM
Quote from: Poundcake
yeah it's worth every penny, in my opinion. i like it a lot; it has three modes and the sag/compression factor increases as you flick the 3-ways selector switch to the right. it complements my lead tone overdrive, a Butler Tube Driver. i also tried using it as a booster to my amp's Ultra channel and it really works well :)
Thanks for the heads up. Can't wait to get it. Hopefully it arrives soon so I can fiddle with it before the gig this weekend.
Title: Re: Post your pedalboard chain routing here!
Post by: ayofish on August 30, 2006, 09:58:18 PM
ung behringer stuff heheh over ayos bsta d mabigat paa mo ehheehhe ala lng angas alang pinagkaiba sa tunog ng leading brands ehehhehhe copy ng mga peds ng boss hehheetapos ung tube od daw copy ng tube screamer ehehhehe astig isipin noh?? high end pedals for half the price !!! un lng nga dapat ingatan.. ako naman palagi ko gamit pag gigs ung mga behringer ko at d pa naman ako nag kakaproblema hehehhe
Title: Re: Post your pedalboard chain routing here!
Post by: les_paul_magic on September 01, 2006, 10:16:33 AM
may mga soundclip kayo sa setup nyo? curious lang ano mga tones sa mga pedals.
Title: Re: Post your pedalboard chain routing here!
Post by: blue_raven on September 01, 2006, 11:12:43 AM
mine is:
ibby arc-300 -> dunlop gcb95 -> boss cs3 -> marshall shredmaster -> boss od3 -> boss ch1 -> digitech xdd digital delay -> peavey studio pro 112
my setup is as simple as this, and i can get the tone that i want :-D pero gusto ko pa din ng amp na nilagay ko jan, equalizer at phaser hehe (http://i8.photobucket.com/albums/a41/badongrodrigs/Untitled-1copy.jpg)
any comments po? gusto ko pa rin ng improvement sa chain ko. ^^ (medyo noob pa rin kasi sa analog setup, since na-GAS ako dito hehe)
bro nahilo ako kaka-trace ng loops ng setup mo hahaha umikot mundo ko eh hehe
ginagamit mo na parang lineselector ung psm5? adik ah hehe
heheh, pam-bypass lang po nung behringer+arion loop siya bale. 2 outputs kasi yung arion, tapos naka-set sa 2 input yung behringer AB100, switching siya between 2 inputs, kaya 2 lines ulit siya. all in all, 3 ang linya ko, kung isasama si LS2 ^^ balak ko pang ibahin 'yung setup (ilalabas yung G2.1u, etc...)
Title: Re: Post your pedalboard chain routing here!
Post by: haey2 on December 30, 2006, 09:50:03 AM
any comments po? gusto ko pa rin ng improvement sa chain ko. ^^ (medyo noob pa rin kasi sa analog setup, since na-GAS ako dito hehe)
bro nahilo ako kaka-trace ng loops ng setup mo hahaha umikot mundo ko eh hehe
ginagamit mo na parang lineselector ung psm5? adik ah hehe
heheh, pam-bypass lang po nung behringer+arion loop siya bale. 2 outputs kasi yung arion, tapos naka-set sa 2 input yung behringer AB100, switching siya between 2 inputs, kaya 2 lines ulit siya. all in all, 3 ang linya ko, kung isasama si LS2 ^^ balak ko pang ibahin 'yung setup (ilalabas yung G2.1u, etc...)
WOW!!!nahilo ko sa setup mo bro...hehehe....pero ok yan, daming sound options nyan... ako kasi, setup ng tamad eh...hehehe:
guitar > vox wah > boss sd2 > boss dd3 > peavey delta blues
8-) 8-) 8-)
Title: Re: Post your pedalboard chain routing here!
Post by: xelalien on December 30, 2006, 12:47:07 PM
buti kayo may SD2! T____T
Title: Re: Post your pedalboard chain routing here!
Post by: CARABAO on December 30, 2006, 01:22:48 PM
nahilo tlga ako dun xelalien! hehehe! pero astig yan a! anyway.. yung ab200 ba parang boss ls2? mejo naguguluhan tlga ako.
Title: Re: Post your pedalboard chain routing here!
Post by: xelalien on December 31, 2006, 12:45:50 PM
anyway.. yung ab200 ba parang boss ls2? mejo naguguluhan tlga ako.
sir nasubukan ko dati yung AB200 (dual switch) nung bibilhin ko pa lang yung AB100; i think hindi siya kaparehas ng LS2. mas maraming looping options yung LS2; tapos may bypass pa. tapos parang AB100 lang ata yung AB200, pero more on switching kasi yung AB200 -- may latch/unlatch switches siya, kung di ako nagkakamali.
(btw si sir Turi nagbebenta ng AB200 di ba? :mrgreen: i smell GAS...)
Title: Re: Post your pedalboard chain routing here!
Post by: markflo on December 31, 2006, 12:49:31 PM
my current setup:
squier '51--->korg ax1000g---->peavey bandit
it rawks!
Title: Re: Post your pedalboard chain routing here!
Post by: xelalien on January 03, 2007, 10:32:33 AM
ampanget! tama ba? parang may mali, kaaayos ko lng ulet, ngaun ngaun lng.. :? :cry: :? :cry: :? :cry:
ser, nga po pala, maganda ba yung sound ng YJM pedal? oks din ba sya pamboost ng DS-1?
Title: Re: Post your pedalboard chain routing here!
Post by: vegetablejoe on January 03, 2007, 12:14:35 PM
I'm still experimenting with placement. Too many od/gain options eh. Perhaps you guys can suggest some alternate pedal placements...
guitar > (optional for strat: SD Pickup Booster) > (optional Ibanez Wah) > Proctavia > Micro Vibe > (optional Phase90) > Bad Monkey OR TS clone OR modded OD-3 > (optional gain/distortion pedal: bamf'd SD-1 OR modded DS-1 OR RAT-2 OR JH-1 Fuzz Face ) > Boston Delay > tube or ss amp
if the chosen amp has an fx loop, option to move Delay and maybe the Phase90 there, along with a volume box i intend to build.
Title: Re: Post your pedalboard chain routing here!
Post by: markflo on January 03, 2007, 12:40:59 PM
I'm still experimenting with placement. Too many od/gain options eh. Perhaps you guys can suggest some alternate pedal placements...
guitar > (optional for strat: SD Pickup Booster) > (optional Ibanez Wah) > Proctavia > Micro Vibe > (optional Phase90) > Bad Monkey OR TS clone OR modded OD-3 > (optional gain/distortion pedal: bamf'd SD-1 OR modded DS-1 OR RAT-2 OR JH-1 Fuzz Face ) > Boston Delay > tube or ss amp
if the chosen amp has an fx loop, option to move Delay and maybe the Phase90 there, along with a volume box i intend to build.
proctavia!!! bad monkey!!! YAN ang setup! great choices vegetablejoe!
Title: Re: Post your pedalboard chain routing here!
Post by: Poundcake on January 03, 2007, 12:50:07 PM
Bad Monkey astig! binitawan ko yung TS-808 ko for it! hehe :)
Title: Re: Post your pedalboard chain routing here!
Post by: vegetablejoe on January 03, 2007, 01:11:15 PM
... proctavia!!! bad monkey!!! YAN ang setup! great choices vegetablejoe!
Thanks, sir markflo! Been searching for the elusive components to several of the Hendrix/Trower sounds for a long time. This is the closest I've gotten so far. Chops and jams na lang ang wish ko for 2007; am done with gear acquisition na.
... on second thought...
sir Poundcake,
I would gladly swap my BM for your TS-808 anytime! hehehe!
Title: Re: Post your pedalboard chain routing here!
Post by: Poundcake on January 03, 2007, 01:31:50 PM
... proctavia!!! bad monkey!!! YAN ang setup! great choices vegetablejoe!
Thanks, sir markflo! Been searching for the elusive components to several of the Hendrix/Trower sounds for a long time. This is the closest I've gotten so far. Chops and jams na lang ang wish ko for 2007; am done with gear acquisition na.
... on second thought...
sir Poundcake,
I would gladly swap my BM for your TS-808 anytime! hehehe!
hehe i sold the TS-808 na e. kaya hindi ako GAS god, nagbebenta ako ng gamit kasi, hindi nag-iipon lang! :)
Title: Re: Post your pedalboard chain routing here!
Post by: markflo on January 03, 2007, 02:11:31 PM
dude! get a magicboy! $150 siya but it sounds friggin' awesome! and it's small too! vibe rawks!
... proctavia!!! bad monkey!!! YAN ang setup! great choices vegetablejoe!
Thanks, sir markflo! Been searching for the elusive components to several of the Hendrix/Trower sounds for a long time. This is the closest I've gotten so far. Chops and jams na lang ang wish ko for 2007; am done with gear acquisition na.
... on second thought...
sir Poundcake,
I would gladly swap my BM for your TS-808 anytime! hehehe!
Title: Re: Post your pedalboard chain routing here!
Post by: vegetablejoe on January 04, 2007, 10:43:46 AM
dude! get a magicboy! $150 siya but it sounds friggin' awesome! and it's small too! vibe rawks! ...
Hahaha!!! Lovepedal pala yan. Noice... but I just spent half a year saving up and ordering a vibe, and now that I finally got it, something new and better comes along! waaahh!!! :-o :-D Ouch! Ayaw ko na! I hope to be GAS-free this year! :wink:
my apologies to thread-owner Poundcake for going off-topic...
Going back on-topic, my "minimalist" set-up was:
guitar > SD Pickup Booster > Bad Monkey > Zoom G2 > practice amp
but I'm having too much fun playing with all the new toys, so the G2 is gathering cobwebs. :-D
Title: Re: Post your pedalboard chain routing here!
Post by: Sugar Ray Vaughan on January 25, 2007, 06:30:47 PM
question: is the SD booster only for single-coiled guitars?
Title: Re: Post your pedalboard chain routing here!
Post by: Poundcake on January 26, 2007, 07:16:45 AM
question: is the SD booster only for single-coiled guitars?
nope, but the difference is more apparent in single-coil equipped guitars :)
as of January 26, 2007 at 7:11AM, zero pedal GAS pa rin ako.. hehe! and i love it! more funds pangdate :lol:
i think i forgot to post my other pedalboard's routing here:
guitar >> Peterson Strobostomp >> Home Brew ComPressor Retro >> Xotic AC Booster >> Fulltone Distortion Pro >> MXR EVH Phase 90 >> MXR M-117R Flanger >> BOSS TR-2/PS-5/CH-1 (depending on the need) >> TC Electronic Vintage Delay
no more robust routing here! i use this for straight-up playing so that i can concentrate more on burning the fretboard than stomping away. but nothing beats this routing for worry-free playing: guitar >> amp :)
Title: Re: Post your pedalboard chain routing here!
Post by: jack in a vox on January 26, 2007, 07:43:36 AM
Title: Re: Post your pedalboard chain routing here!
Post by: CARABAO on January 26, 2007, 11:33:10 PM
tamad setup:
guitar>vox v847>rv3>mt2/sd2>amp
pag matiyaga magdala:
guitar>vox v847>rv3>sd2>mt2>ax30g>gdi21>amp
ayun. heheh. anyway, yung gdi21 lagi naka off. pagpangit lang ang tunog ng distortion ko sa amp, gagamitin ko yung gdi bka sakali. at syempre, kapag kulang/walang amp sa venue. ayun.
Title: Re: Post your pedalboard chain routing here!
Post by: brandey on January 27, 2007, 12:16:06 AM
wala talaga ko mahanap na gain pedals na ipapalit ko sa korg ko kaya eto na cguro final setup ko
Custom line selector footswitch = line A / line B / Mute Tuner Drive Channell (All Analog) Line A send = Wah = Overdrive = EQ = Volume = Delay = Return A Clean Channell (Digital) Line B send = Multi FX = Return B
:mrgreen: pedal list
Custom built Relay Line slector switch, Matrix Tuner, cgb95, BD2 (Keeley mod), Arion EQ, Lazer Volume pedal, Boss DM3 analog delay (ako nalang yata meron d2), Zoom 1202 Rack FX,
Title: Re: Post your pedalboard chain routing here!
Post by: vaisteen2003 on March 22, 2007, 06:53:13 PM
eto set up ko napakalupit at mahirap is set up. PROMISE
Guitar > Bad Monkey > SD 2 Crunch clean sound ko | > SD 2 Lead channel boost ko. Delay galing sa amp.
ayan na. wooo!!! nahirapan ako mag explain. :mrgreen:
hay nako. lol
Title: Re: Post your pedalboard chain routing here!
Post by: gjuanengo on March 22, 2007, 07:39:49 PM
Custom line selector footswitch = line A / line B / Mute Tuner Drive Channell (All Analog) Line A send = Wah = Overdrive = EQ = Volume = Delay = Return A Clean Channell (Digital) Line B send = Multi FX = Return B
:mrgreen: pedal list
Custom built Relay Line slector switch, Matrix Tuner, cgb95, BD2 (Keeley mod), Arion EQ, Lazer Volume pedal, Boss DM3 analog delay (ako nalang yata meron d2), Zoom 1202 Rack FX,
may website ba para makagawa ng ganyang diagram? anong site? gusto ko din gumawa ng diagram prang guitargeek. thanks!
Title: Re: Post your pedalboard chain routing here!
Post by: Chito on March 22, 2007, 09:06:40 PM
I just saw what I posted here a while back. It's been changed since then. Now it looks like this.
For me the PH2 sounds a bit better upfront rather than in the effects loop. For clean tones I like the SD1 better than the SD2. For heavier stuff, minsan SD2, minsan naman SD1. Medyo temperamental setup ko o di kaya iba lang gising ko.
When I do get the chance to play though it's really just
Guitar --> SD1/SD2 --> Tech21 Amp
Or kung na ka on yun tv
Guitar --> SD1/SD2 --> GE-7 Tech21 Amp
:-D
Title: Re: Post your pedalboard chain routing here!
Post by: plugzzzz on March 23, 2007, 12:37:04 AM
Title: Re: Post your pedalboard chain routing here!
Post by: pao2pao16 on April 04, 2007, 11:16:00 PM
my setup through time
1) guitar > Zoom 707II > amp
sold my Zoom www.pedallion.com music online store philippines 2) guitar > Line 6 DM4 > amp 3) guitar > Vox v847 > Boss AC-2 > Line 6 DM4 > EHX Small Clone > amp 4) guitar > Vox v847 > Boss AC-2 > Line 6 DM4 > Sansanp gt-2 > EHX Small Clone > amp
sold my line6 traded with Digitech Metal Master + cash then bought a boston delay afterwards
5) guitar > Vox v847 > Boss AC-2 > Digitech Metal Master > Sansamp gt-2 > EHX Small Clone > Boston Delay > amp
Sold my Boss AC-2 to buy a CS-3. slightly regretted doing this cause i love the clean tone of the AC-2 even it cant 100% simulates an acoustic.
Bought a morley volume pedal
6) guitar > Vox v847> Volume Pedal > Boss CS-3 > Digitech Metal Master > Sansamp GT-2 > EHX Small Clone > Boston Delay > amp
With this setup, i put my volume pedal after the wah, before the dist. now the result? like a volume knob of the guitar. it doesnt lower the volume of the dist. obviously its before the dist. i was looking for an violin effect. like the in the song glasgow kiss of JP at 3:06 time track. so i put the volume after the dist and chorus but before the delay, of course. you dont want to cut the delay.
Sold my Digitech Metal Master Sold my volume pedal. i didnt actually need it at that time.
7) guitar > Vox v847 > Boss CS-3 > Sansamp > EHX Small Clone > Boston Delay
Bought a Bad Monkey to boost my sansamp
8 ) guitar > Vox v847 > Boss CS-3 > Bad Monkey > Sansamp > EHX Small Clone > Boston Delay >amp
Bought an NS-2 cause my rig was starting to get really annoyingly noisy. CS-3+BM+Sansamp is a godly tone but noisy
9 ) guitar > Vox v847 > Boss CS-3 > Bad Monkey > Sansamp > Boss NS-2 > EHX Small Clone > Boston Delay > amp
NOW!! now heres my problem. i was kinda noob with the ns2. as you may notice that i put it after the compressor, od, dist. the ns2 cant cut the noise. it also eats my tone and the volume. i started to dislike the ns-2. so i messed around with the 4 peds. actually just did it a couple of hours ago. put the ns2 before the compressor. and my problem was solved. but my sustain was horrible. the ns2 cuts it immediately. only because the threshold was turned all the way up. so i adjusted it and voila. perfect.
now the cs-3 supposedly should balance your low and high. i notice when i turn the sansamp and BM on with the compressor, i didnt notice any difference except adding sustain. so i tried to put it after the dist and od. then there you go. it balances my dirt. i finally found my tone.
Rhythm then solo. a moment where the solo should be louder than your rhythm tone. how did i solve this problem? simply turning the level of the cs-3 up until desired. now i have a balance and loud lead tone.
MY SETUP: guitar > Boss NS-2 > Vox v847 > Bad Monkey > Sansamp > Boss CS-3 > EHX Small Clone > Boston Delay > amp
advice and objections are much appreciated.
Title: Re: Post your pedalboard chain routing here!
Post by: abyssinianson on April 05, 2007, 12:45:07 AM
guitar - Ground Control Pro + Fulltone Wah + Ernie Ball Volume Pedal - GCX Audio Switcher {Sweet Sound Mojo Vibe, Fulltone Supatrem, Lovepedal Eternity, ZVex Johnny Octave, Chicago Iron Octavia, Red Witch Chorus, Memory Lane Delay (Short), TC Electronics Vintage Delay (Echo/ Long)} - Whirlwind A/B/C router - Mesa Mark IV, Mesa DC-5, Diezel VH4, Mesa Trem-o-verb 100W
Title: Re: Post your pedalboard chain routing here!
Post by: Poundcake on April 05, 2007, 02:33:06 AM
AAAAAAAHHHH yang Ground Control Pro at GCX Audio Switcher ang trip ko ngayon e! :(
Title: Re: Post your pedalboard chain routing here!
Post by: ubersam on April 05, 2007, 03:41:42 AM
AAAAAAAHHHH yang Ground Control Pro at GCX Audio Switcher ang trip ko ngayon e! :(
Check this out: http://www.soundsculpture.com/products/switchblade.htm (http://www.soundsculpture.com/products/switchblade.htm) - mas flexible ang routing capabilities nya kaysa GCX. With the GCX, the routing goes from loop 1 to 8 and you cannot swap the order without actually moving the pedal into another loop.
Title: Re: Post your pedalboard chain routing here!
Post by: emil_murillo on April 05, 2007, 07:25:10 AM
Ayuz!
Title: Re: Post your pedalboard chain routing here!
Post by: abyssinianson on April 05, 2007, 08:42:24 AM
AAAAAAAHHHH yang Ground Control Pro at GCX Audio Switcher ang trip ko ngayon e! :(
Check this out: http://www.soundsculpture.com/products/switchblade.htm (http://www.soundsculpture.com/products/switchblade.htm) - mas flexible ang routing capabilities nya kaysa GCX. With the GCX, the routing goes from loop 1 to 8 and you cannot swap the order without actually moving the pedal into another loop.
what do you mean the routing goes from loop 1 through 8? i've been using the GCX and a similar bradshaw unit for years and the way I use it is as follows: if your songs require particular pedals to do a part then the GCX may be arranged based on that which is what I do. like, say, your song uses a clean signal and then does some phrases with a flange or a chorus with a touch of boost, you can program a loop into your GC that calls up flange + chorus + boost and step on a patch that calls up specific pedals (or loops if your pedals are arranged 1 pedal/ loop) to produce your sound. the key to this setup is you need to dial yoursetup sounds before shoving the pedals in the rack because the idea is a set-and-forget approach to gigging. it can be annoying to change settings on the fly even with your pedals on a sliding rack tray. i didn't want to accidentally trigger new sounds by nudging a knob the wrong way on a gig so I got the GCX. currently, my patches are divided into clean + chorus, clean + slow delay + chorus, clean + echo, overdrive + short delay. depending on what a song might need, i will alter the patches and add/ remove pedals to taste. the setup works well and gets the job done.
Custom Audio Electronics can also do the same thing and custom route your switcher to your specs. My GCX used to control a couple of rack pieces (a TC Electronics D-Two rack delay and an Eventide Harmonizer) but those have since been taken out and replaced with analog style pedals (the Memory Lane and the TC Delay pedal) so if you wanna do that you can go for it equally well.
there are a lot of companies now that make switchers after stuff Bob Bradshaw originally designed so you have a lot to choose from. just make sure to ask the companies what their products do and what the limitations are so you can make an intelligent purchase. good luck!
Title: Re: Post your pedalboard chain routing here!
Post by: ubersam on April 05, 2007, 09:35:03 AM
AAAAAAAHHHH yang Ground Control Pro at GCX Audio Switcher ang trip ko ngayon e! :(
Check this out: http://www.soundsculpture.com/products/switchblade.htm (http://www.soundsculpture.com/products/switchblade.htm) - mas flexible ang routing capabilities nya kaysa GCX. With the GCX, the routing goes from loop 1 to 8 and you cannot swap the order without actually moving the pedal into another loop.
what do you mean the routing goes from loop 1 through 8?
Ah.. let me elaborate.
The GCX has eight individual loops, two rows of four loops each. When a loop is on, the signal is routed to its 'send', when it is off, the signal is routed to its 'out'. Because each loop is independent of the next, a patch cable is needed to feed the signal from one loop's 'out' to the next loop's 'in'. While it isn't necessary to use succeeding loops, doing so makes wiring a little simpler. For example, lets just say that we are using the first four loops for four different efx pedals. The routing will go like:
guitar > loop 1 in > loop 1 send > efx pdl. 1 in > efx pdl. 1 out > loop 1 return > loop 1 out > patch cable > loop 2 in > loop 2 send > efx pdl. 2 in > efx pdl. 2 out > loop 2 return > loop 2 out > patch cable > loop 3 in, etc.> loop 4 in etc,. > amp/preamp in.
With that, you can have any of the four loops on or off at any time. You can have loop 1 on and the rest off, or you can have 1 off, 2 on, 3 off, 4 on; etc. etc. In this example, loop 1 will always be before loop 2, which will always be before loop 3, which will always be before loop 4. If you wanted to change the order of your efx, lets say you wanted efx. 2 to be first, you'll have to unplug it from loop 2 and plug it into loop 1. The GCX does not have the capability to change the order of your efx, you will have to do it manually.
OTOH, the switchblade can be programed to route your signal in any order regardless of which loop an efx is occupying, IOW, the signal routing does not have to follow the order of the loops. You can have your modulation before your delay and switch it around, delay before modulation, on the fly. Etc.
Title: Re: Post your pedalboard chain routing here!
Post by: Bart on April 05, 2007, 09:39:12 AM
Teese Wizard wah > Barber LTD low gain overdrive > Bart's B1 Looper (Loop1: Fulltone Full-Drive 2 Mosfet ed ; Loop2: Boss Tu-12 Tuner) > BBE Sonic Stomp > front of amp. Visual SOund H2O Chorus Echo pedal through the amp's FX loop.
Title: Re: Post your pedalboard chain routing here!
Post by: abyssinianson on April 05, 2007, 10:15:13 AM
AAAAAAAHHHH yang Ground Control Pro at GCX Audio Switcher ang trip ko ngayon e! :(
Check this out: http://www.soundsculpture.com/products/switchblade.htm (http://www.soundsculpture.com/products/switchblade.htm) - mas flexible ang routing capabilities nya kaysa GCX. With the GCX, the routing goes from loop 1 to 8 and you cannot swap the order without actually moving the pedal into another loop.
what do you mean the routing goes from loop 1 through 8?
Ah.. let me elaborate.
The GCX has eight individual loops, two rows of four loops each. When a loop is on, the signal is routed to its 'send', when it is off, the signal is routed to its 'out'. Because each loop is independent of the next, a patch cable is needed to feed the signal from one loop's 'out' to the next loop's 'in'. While it isn't necessary to use succeeding loops, doing so makes wiring a little simpler. For example, lets just say that we are using the first four loops for four different efx pedals. The routing will go like:
guitar > loop 1 in > loop 1 send > efx pdl. 1 in > efx pdl. 1 out > loop 1 return > loop 1 out > patch cable > loop 2 in > loop 2 send > efx pdl. 2 in > efx pdl. 2 out > loop 2 return > loop 2 out > patch cable > loop 3 in, etc.> loop 4 in etc,. > amp/preamp in.
With that, you can have any of the four loops on or off at any time. You can have loop 1 on and the rest off, or you can have 1 off, 2 on, 3 off, 4 on; etc. etc. In this example, loop 1 will always be before loop 2, which will always be before loop 3, which will always be before loop 4. If you wanted to change the order of your efx, lets say you wanted efx. 2 to be first, you'll have to unplug it from loop 2 and plug it into loop 1. The GCX does not have the capability to change the order of your efx, you will have to do it manually.
OTOH, the switchblade can be programed to route your signal in any order regardless of which loop an efx is occupying, IOW, the signal routing does not have to follow the order of the loops. You can have your modulation before your delay and switch it around, delay before modulation, on the fly. Etc.
oh, if arrangement is what you want then the GCX isn't going to suit that use. i don't think it was designed to do that in the first place. arrangement of effects was exactly something I wanted to avoid which is why the GCX worked for my purpose. i wanted a simplified version of what was on my pedalboard without having to tapdance all over the floor. all i wanted to do during gigs was step on a patch and call up the combination of the pedals that I would normally step on in pairs or in succession to achieve the sound I needed.
there is also something else I want to share about the GCX which might be useful to some - the sound you get out of your amp is very much dependent on the order of your effects because, really, the GCX is a simplified version of a pedalboard setup. so as long as you are fine with the sound and order of your pedals and want to just consolidate your effects and minimize stepping on pedals, then the GCX might work for that purpose. re-arranging the order of pedals is not possible but this wasn't meant to be done as part of its design.
Title: Re: Post your pedalboard chain routing here!
Post by: vegetablejoe on April 05, 2007, 10:24:05 AM
I guess we all mix-match pedals quite often, from what I've seen above...
I'm still fiddling with the combinations and trying to hear what sounds best. For now...
guitar > Fulltone Soul-Bender > Proctavia > Micro Vibe > TS-808 > RAT-2 > (optional MXR Phase90) > Boston Delay > tube or ss amp
- am trying to fit in my Ibanez WH-10 Wah somewhere, but haven't heard the right spot... - also trying to determine which pedals are redundant and can be taken out of the chain
Any suggestions?
Some stuff pair well together, like the Soul-Bender + RAT, or Proctavia + RAT, or Vibe + TS. But put them all together and the chain sounds less than nice.
Title: Re: Post your pedalboard chain routing here!
Post by: ubersam on April 05, 2007, 12:14:19 PM
@abyssinianson - I hear ya. The GCX is will do fine if one does not need the flexibility of changing the order of pedals. I was just offering an option if one does desire such flexibility.
BTW, I modded my GCX to eliminate the need for patch cables between loops. I just hardwired the output of one loop to the input of the next. It is an easy mod but it voids the warranty.
Title: Re: Post your pedalboard chain routing here!
Post by: abyssinianson on April 05, 2007, 12:25:26 PM
@abyssinianson - I hear ya. The GCX is will do fine if one does not need the flexibility of changing the order of pedals. I was just offering an option if one does desire such flexibility.
BTW, I modded my GCX to eliminate the need for patch cables between loops. I just hardwired the output of one loop to the input of the next. It is an easy mod but it voids the warranty.
@ubersam: flexibility is definitely cool to have in a unit if you need it in your music rig. its great to see that there are a lot of alternatives out there in case my GCX conks out:) i don't do very much mixing of pedals during a gig so everything stays in the rack until a new song is written or we try different sounds during rehearsal. also, i can see how the switchblade would be awesome for Muse type rigs that rely on tons of effects...
have you tried asking Voodoo if they do mods in the custom shop? Custom Audio does stuff like this so I wouldn't be surprised if they could've done the work for you so you could still have the warranty intact.
Title: Re: Post your pedalboard chain routing here!
Post by: metalmarkk on April 09, 2007, 05:10:41 PM
Title: Re: Post your pedalboard chain routing here!
Post by: lil.drummerboy on April 09, 2007, 05:21:13 PM
wow ang lupet. :-D :-o
Title: Re: Post your pedalboard chain routing here!
Post by: vaisteen2003 on April 09, 2007, 05:22:35 PM
eto ung my soon to be set up once na matapos ko na.
Gtr - > BOSS TU 2 ->>Clean signal ->> Chorus------->>>>>>>>>>>>>>|Behringer|->>> AMP ->>Dirty Signal ->> Bad Monkey -> SD 2 -> FS5L>>>>|AB 200 |
i dont know if it will work the way i thought it would but lets see.
reason why its like this is becuase im trying to minimize the number of times ill be stepping on the pedals. i dont like tap dancing eh. so with the AB switch i think i can make it work. SANA!!! If you have other sugestions please let me know.
Title: Re: Post your pedalboard chain routing here!
Post by: wh1t33rick on April 09, 2007, 10:58:09 PM
:mrgreen: :mrgreen: @Sir Poundcake
Question din me sir poundcake eto ung mga nasa akin ngaun...how can I set it for songs like United, Jars of Clay, U2, Delirious?
Bad Monkey, Korg Ax1000G, DD3, TS7, DOD Wah/Vol...
...to follow EQ and Rocktron Sonic Glory OD... :mrgreen: :mrgreen:
Title: Re: Post your pedalboard chain routing here!
Post by: kurtcobainer on April 10, 2007, 01:52:25 AM
bart: how do you find the ltd?.. like compared to the ltd silver, ltd sr, or fulldrive 2?.. dont really know if the ltd silver or sr has that noticeable flatter eq, not much of a difference kaya?..
Title: Re: Post your pedalboard chain routing here!
Post by: superoxy on April 10, 2007, 01:10:44 PM
tama lang ba na gamitin ko un sd2 pang boost sa gdi pag solo?
inalis ko sa chain ung noise supresor at ung cs3. nakaloop ung chain ko noon sa ns2 tpos hiwalay lang ung delay. pero feeling ko namamatay ung tunog.
help help. :)
unahin mo lang yung chorus bago delay. huli lagi dapat ang delay. medyo problema na ng NS-2 yan e, medyo maingay pa naman yung GDI21 at high gain :)
thanks. :) ok lang ba pang boost ung sd2 sa gdi?
ok lnag yan sir. I use my SD 2 to boost my bad monkey and the flavor is just right.
salamatss :-D
Title: Re: Post your pedalboard chain routing here!
Post by: voidmain on May 01, 2007, 08:59:04 PM
Updated setup ko po:
Guitar >> Boss AC-2 (with line going to amp or DI) >> Visual Sound Jekyll and Hyde >> Sansamp Tri A.C. >> Korg Dynamic Echo >> Daphon E20DL >> amp
Still hunting for some stuff: 1) 2 more delays - either line6 na echo park or digitech digidelay and a boss DD-20 (deluxe memory man sana kaso hirap ipasok sa budget e) 2) 2 chorus pedals - small clone at isa pang modern-sounding chorus 3) 2 EQ's - boston EQ-100
Btw po, delay freak ako and I like options :-D
Title: Re: Post your pedalboard chain routing here!
Post by: mawts_gwaps on July 01, 2007, 03:55:52 AM
ang setup ko is:
guitar > Snarling Dogs Whine-o-Wah > Boss BD-2 > Behringer CS100 > Boss PS-2 > amp
may gumagawa ba nito?
mejo unorthodox ung dirt den comp, pero dito ko nakukuha ung tone na gus2 ko eh.. ang effect nya parang the comp lessens the harshness at pag-kalat ng drive ng bd2, so the effect is parang clean, transparent tone w/ mild od and semi long sustain.. mejo clapton-ish.. im using a strat tpos, sa bd-2, 10 o clock ung gain ko, tapos sa cs, 11 o clock sustain den 1 o clock attack
ang nabasa ko lang na ganito setup is yung kay robert keeley (Boss BD-2 Keeley Mod > Keeley Compressor)
any comments? mejo matagal ko na itong setup and nag-titimpla lang ako talaga by ear.. i'd like to hear oder ppls comments sana!
tnx!
Title: Re: Post your pedalboard chain routing here!
Post by: bitusan on July 02, 2007, 01:05:48 PM
actually aware ako na di ko nagagamit ng 100% lahat ng effects pero ayos na din sa akin :-) kung may tips kayo para mas ma-unleash ko yung potential, i would gladly appreciate it.
nasa baba yung mga frequently used effects. Acoustic simulator mga 3 songs lang namin yan. Space Chorus tsaka compressor ko almost always naka-on. Pinakamadalas ko gamitin yung Wylde overdrive :wink:
PS: bigat dalhin dahil sa 2 line6...
Title: Re: Post your pedalboard chain routing here!
Post by: voidmain on July 04, 2007, 01:11:10 AM
Hindi po ako expert or anything, kaso how about trying this sir:
Guitar >> Boss Acoustic Modeler (with 1 line to amp kung pwede) >> Behringer Compressor >> MXR Overdrive >> Line 6 Crunchtone >> Behringer Flanger >> Line6 SpaceChorus >> Line6 Echopark >> Amp
Reasons po:
Acoustic modeler before everything else - Meron po akong Boss AC-2 on my current pedalboard, kaso ayoko siyang padanin sa line ng effects pedals for 2 reasons: 1) I like my acoustic tone as unaltered as possible without tap dancing 2) May line selector ka pa :-D (kaso malamang di mo magustuhan gawin to since type mong naka-on yung chorus at compressor before the it)
Everything else - Orthodox setup lang to sir. Kayo po talaga bahala kung ano gusto nyong gawin. Gusto ko lang pagtabihin yung drive pedals para mabilis pag-lipat/pag-on ng drives e. Btw po, yung MXR na Zakk Wylde OD was created to drive a dirty amp (or so I read somewhere). Paglaruan nyo po yung Cruchtone at MXR para sa type nyong cascaded OD tone.
Pahingi na lang po ng review kung mas ok sa iyo yung ganitong setup.
Title: Re: Post your pedalboard chain routing here!
Post by: foolintherain on July 04, 2007, 02:54:23 AM
Hindi po ako expert or anything, kaso how about trying this sir:
Guitar >> Boss Acoustic Modeler (with 1 line to amp kung pwede) >> Behringer Compressor >> MXR Overdrive >> Line 6 Crunchtone >> Behringer Flanger >> Line6 SpaceChorus >> Line6 Echopark >> Amp
Reasons po:
Acoustic modeler before everything else - Meron po akong Boss AC-2 on my current pedalboard, kaso ayoko siyang padanin sa line ng effects pedals for 2 reasons: 1) I like my acoustic tone as unaltered as possible without tap dancing 2) May line selector ka pa :-D (kaso malamang di mo magustuhan gawin to since type mong naka-on yung chorus at compressor before the it)
Everything else - Orthodox setup lang to sir. Kayo po talaga bahala kung ano gusto nyong gawin. Gusto ko lang pagtabihin yung drive pedals para mabilis pag-lipat/pag-on ng drives e. Btw po, yung MXR na Zakk Wylde OD was created to drive a dirty amp (or so I read somewhere). Paglaruan nyo po yung Cruchtone at MXR para sa type nyong cascaded OD tone.
Pahingi na lang po ng review kung mas ok sa iyo yung ganitong setup.
Interesting :-o Salamat po! I will try this tonight pag uwi from work. Bigyan kita ng review tomorrow :-D Kailangan ko din i-reposition yung pedals kasi ang sikip nung gator pedalboard, nilagay ko sa ilalim yung mga most used effects ko.
btw; huwag mo ko i-sir :oops: 25 lang po...
Title: Re: Post your pedalboard chain routing here!
Post by: voidmain on July 04, 2007, 03:59:35 PM
Haha, ok bro.
Kaso for the record, 23 lang naman ako e :-P
Title: Re: Post your pedalboard chain routing here!
Post by: kurtcobainer on July 04, 2007, 04:11:21 PM
Title: Re: Post your pedalboard chain routing here!
Post by: vaisteen2003 on July 04, 2007, 04:15:12 PM
eto sakin. hahaha . walang ka abog abog.
GTR >>> Digitech Bad Monkey >>> BOSS SD 2 >>> LIne 6 amp for delay and amplification of course. | >>> BOSS FS 5L
Title: Re: Post your pedalboard chain routing here!
Post by: Gibson78 on July 04, 2007, 09:59:47 PM
Hi, sali ako! Naaliw kasi ako sa http://www.guitargeek.com (http://www.guitargeek.com)
For home use: (http://i115.photobucket.com/albums/n302/Deluxe78/homeset.jpg) I'm currently gassing for the blurred out items, baka may nagbebenta dito :-D
For gigs: (http://i115.photobucket.com/albums/n302/Deluxe78/gigset.jpg)
Cheers everybody! :wink:
Title: Re: Post your pedalboard chain routing here!
Post by: chadrhix on July 04, 2007, 11:36:31 PM
Hindi po ako expert or anything, kaso how about trying this sir:
Guitar >> Boss Acoustic Modeler (with 1 line to amp kung pwede) >> Behringer Compressor >> MXR Overdrive >> Line 6 Crunchtone >> Behringer Flanger >> Line6 SpaceChorus >> Line6 Echopark >> Amp
Reasons po:
Acoustic modeler before everything else - Meron po akong Boss AC-2 on my current pedalboard, kaso ayoko siyang padanin sa line ng effects pedals for 2 reasons: 1) I like my acoustic tone as unaltered as possible without tap dancing 2) May line selector ka pa :-D (kaso malamang di mo magustuhan gawin to since type mong naka-on yung chorus at compressor before the it)
Everything else - Orthodox setup lang to sir. Kayo po talaga bahala kung ano gusto nyong gawin. Gusto ko lang pagtabihin yung drive pedals para mabilis pag-lipat/pag-on ng drives e. Btw po, yung MXR na Zakk Wylde OD was created to drive a dirty amp (or so I read somewhere). Paglaruan nyo po yung Cruchtone at MXR para sa type nyong cascaded OD tone.
Pahingi na lang po ng review kung mas ok sa iyo yung ganitong setup.
bro, tried out your settings. mas gumanda nga yung buhay :-D nabuhay yung flanger and chorus ko, plus just what you said, sarap paglaruan nung crunchtone and MXR! And yes, mas gumanda yung sound ng Boss AC-3 without the compressor and chorus altering it. I'll stick to this one. Thanks! :-D
Title: Re: Post your pedalboard chain routing here!
Post by: voidmain on July 05, 2007, 10:01:08 AM
Glad to hear it bro :-D
Title: Re: Post your pedalboard chain routing here!
Post by: andrton on July 19, 2007, 11:33:23 AM
Hi, sali ako! Naaliw kasi ako sa http://www.guitargeek.com (http://www.guitargeek.com)
For home use: (http://i115.photobucket.com/albums/n302/Deluxe78/homeset.jpg) I'm currently gassing for the blurred out items, baka may nagbebenta dito :-D
For gigs: (http://i115.photobucket.com/albums/n302/Deluxe78/gigset.jpg)
Cheers everybody! :wink:
sir pano nagaawa to? meron bang parang software tapos drag and drop ung mga pedals?
Title: Re: Post your pedalboard chain routing here!
Post by: bluenote on July 19, 2007, 04:01:50 PM
Hi, sali ako! Naaliw kasi ako sa http://www.guitargeek.com (http://www.guitargeek.com)
For home use: (http://i115.photobucket.com/albums/n302/Deluxe78/homeset.jpg) I'm currently gassing for the blurred out items, baka may nagbebenta dito :-D
For gigs: (http://i115.photobucket.com/albums/n302/Deluxe78/gigset.jpg)
Cheers everybody! :wink:
sir pano nagaawa to? meron bang parang software tapos drag and drop ung mga pedals?
Grabe Brad sumakit ang ulo ko sa dami ng pedal mo grabe!
Title: Re: Post your pedalboard chain routing here!
Post by: bluenote on July 19, 2007, 04:42:19 PM
i notice that there is a slight hissing sound on my set-up pano mawawala yun and ano kaya cause nun?.. oh btw the RP80 i only use it for whammy effect so yun first patch nya is naka off yun lahat ng effetcs then second patch is the whammy effect, ok lng ba yun?..
soon to be added:
CHorus Delay Compressor EQ
Title: Re: Post your pedalboard chain routing here!
Post by: tam_guitar on July 25, 2007, 02:27:53 AM
balak ko maglagay ang pedal wah before ang mt2, kasi parang sanay ako sa kanan ung pedal wah eh, tapos balak ko pang magdagdag ng isa pang pedal, either phaser or any pedal na lang.
yung tugtugan po namin mejo heavy, more on chug-chug po, hehehe. baka me masasuggest pa kayo mga bossing. salamats po! :mrgreen:
Title: Re: Post your pedalboard chain routing here!
Post by: Lahed92801 on July 31, 2007, 09:55:43 AM
Hey guys, what can you use to avoid tone suck? i hear neil zaza uses this VHT preamp/buffer
Title: Re: Post your pedalboard chain routing here!
Post by: jun_gats on August 03, 2007, 08:34:12 AM
Hi, sali ako! Naaliw kasi ako sa http://www.guitargeek.com (http://www.guitargeek.com)
For home use: (http://i115.photobucket.com/albums/n302/Deluxe78/homeset.jpg) I'm currently gassing for the blurred out items, baka may nagbebenta dito :-D
For gigs: (http://i115.photobucket.com/albums/n302/Deluxe78/gigset.jpg)
Hi, sali ako! Naaliw kasi ako sa http://www.guitargeek.com (http://www.guitargeek.com)
For home use: (http://i115.photobucket.com/albums/n302/Deluxe78/homeset.jpg) I'm currently gassing for the blurred out items, baka may nagbebenta dito :-D
For gigs: (http://i115.photobucket.com/albums/n302/Deluxe78/gigset.jpg)
Hi, sali ako! Naaliw kasi ako sa http://www.guitargeek.com (http://www.guitargeek.com)
For home use: (http://i115.photobucket.com/albums/n302/Deluxe78/homeset.jpg) I'm currently gassing for the blurred out items, baka may nagbebenta dito :-D
For gigs: (http://i115.photobucket.com/albums/n302/Deluxe78/gigset.jpg)
Title: Re: Post your pedalboard chain routing here!
Post by: juan sinko on September 28, 2007, 11:35:41 PM
AMP- DM3- GA30- SD1-FW3 -WASBURN WI24 Guitar or
AMP- ZOOM505-SD1-DM3-GA30-FW3-WASBURN WI24 Guitar
Title: Re: Post your pedalboard chain routing here!
Post by: Poundcake on September 28, 2007, 11:40:55 PM
up
Title: Re: Post your pedalboard chain routing here!
Post by: katzenjammer on September 29, 2007, 12:00:55 AM
hello bro's! ngayon ko lang po uli nakita itong thread na ito, tagal ko na po ito hinahanap, sana po lagyan ng sticky. :-D may tanung lang po ako, pedals set ko po kasi ngayon DS-1, CH-1, DD-3, BD-2, GE-7. coming up pa lang po yung PSM5. BCB6 set up po ako.. ano po kaya ang magandang chain route dito? any suggestions po? maraming salamat mga pedal geeks! :wink:
Title: Re: Post your pedalboard chain routing here!
Post by: voidmain on September 29, 2007, 12:21:01 AM
@katzenjammer Kung standards lang paguusapan, you can go with the following setup:
Ngayon, yung DS-1 at BD-2 paglaruan mo na lang yung setup, personally kasi nilalagay ko yung pedal na maganda mag-clean up habang binabawasan mo yung volume at maganda mag breakup kapag nilalakasan mo. To my ears, BD-2 na yun. Also keep in mind na amp simulator ang BD-2. Kaso syempre, bahala ka bro. As for the EQ, bahala ka na dun bro. Pwede siya after ng PSM-5 para ma-shape mo yung tunog ng pickups mo, or after ng dirt pedals para yun naman ma-shape mo. As for me, ilalagay ko siya sa dulo para ma-shape yung overall na signal. Btw, bakit mo pa kailangan ng PSM-5?
Title: Re: Post your pedalboard chain routing here!
Post by: katzenjammer on September 29, 2007, 01:47:55 AM
maraming salamat po sir voidmain! :-D sa PSM-5 will serve as my power supply, since kumpleto na po yung pedal set up ko sa BCB-6 ko as for now.. thanks po uli sir! :-)
Title: Re: Post your pedalboard chain routing here!
Post by: tam_guitar on September 29, 2007, 02:54:32 AM
Title: Re: Post your pedalboard chain routing here!
Post by: soundslikebryan on November 28, 2007, 04:02:13 AM
tanong po mga maestro!!!
I completed the pedals that I wanted. I get the sounds/effects that runs in my head all day long when i play. Pa-suggest naman ng magandang routing set-up to maximize/make my rig sound better.
I'm a mediocre blues player and my amp is a Fender Frontman 65r.
Here are my effects: Digitech - Compressor/Sustainer Digitech - Bad Monkey Ibanez - TS9dx Boss - Mt-2 Boss - Flanger Boss - Super Chorus Dunlop - 95q Wah
Thank you ng marami!!!
Title: Re: Post your pedalboard chain routing here!
Post by: voidmain on November 28, 2007, 07:51:39 AM
Standard setup lang po. Kaso personally, mas gusto ko compressors after ng wah pedals. Btw, blues po ba? Dami mong dirt for a blues player a, kaso sabagay, kanya-kanyang trip yan. :-D
Ay eto na pala routing ko: Boss FW-3 >> Boss AC-2 >> Boss CS-3 >> Fulltone Fulldrive 2 Mosfet >> Boss CE-3 >> Arion SCH-1 >> Boston FL-100 >> MXR EVH Phase 90 >> Line6 Echo Park
I guess last setup ko na to for the year.
Title: Re: Post your pedalboard chain routing here!
Post by: soundslikebryan on November 28, 2007, 08:40:12 AM
He he, napansin mo din pala. I like it dirty, tapos papadaanin mo sa clean channel. Parang kinikiliti ako sa batok pag natugtog ako. Of course, I don't play it with a big crowd. Sa banda ko kasi bass ang instrumento ko, hehe.
Thanks for the chain, I'll try it tonight.
Title: Re: Post your pedalboard chain routing here!
Post by: kawayan_strat on November 28, 2007, 12:16:04 PM
Standard setup lang po. Kaso personally, mas gusto ko compressors after ng wah pedals. Btw, blues po ba? Dami mong dirt for a blues player a, kaso sabagay, kanya-kanyang trip yan. :-D
Ay eto na pala routing ko: Boss FW-3 >> Boss AC-2 >> Boss CS-3 >> Fulltone Fulldrive 2 Mosfet >> Boss CE-3 >> Arion SCH-1 >> Boston FL-100 >> MXR EVH Phase 90 >> Line6 Echo Park
I guess last setup ko na to for the year.
O bro,akala ko di mo nakuha to?
Title: Re: Post your pedalboard chain routing here!
Post by: fraudulentzodiac on November 28, 2007, 12:59:14 PM
(http://i45.photobucket.com/albums/f69/ikabodbubwit/Image022-1.jpg) Guitar->Boss NS-2**->Steinberger Stretch Chromatina Tuner->EHX Stereo Memory Man->EHX Deluxe Electric Mistress->EHX The Worm->Artec Analog Delay->Amp
From output of looper: (Looper output) >> TC Electronic Nova Delay >> Peterson Strobostomp >> AMP/MIXER
Drive Route Summary: Route 1: Lovepedal COT 50 >> Lovepedal Eternity >> ZVex Box of Rock Route 2: Hermida Zendrive >> ZVex Box of Rock Route 3: EMMA ReezaFRATzitz >> ZVex Box of Rock
My LOOP 1 chain is an alternative way of how to create a three-route signal path with one input and one output if an A/B/C switch isn't available. Two A/B switches and two Y-cables/signal splitters are required for this. A/B Switch 1 chooses between Route 1 and either Route 2 or Route 3, while A/B Switch 2 chooses which route (either Route 2 or Route 3) will be sent to the "B" input of A/B Switch 1. Dual-output (not stereo) pedals such as the BOSS TU-2 or the MXR Kerry King 10-band EQ can be used instead of Y-cables.
Experiment and have fun with multi-route switching! :)
Title: Re: Post your pedalboard chain routing here!
Post by: dullFingers on November 28, 2007, 09:59:13 PM
From output of looper: (Looper output) >> TC Electronic Nova Delay >> Peterson Strobostomp >> AMP/MIXER
Drive Route Summary: Route 1: Lovepedal COT 50 >> Lovepedal Eternity >> ZVex Box of Rock Route 2: Hermida Zendrive >> ZVex Box of Rock Route 3: EMMA ReezaFRATzitz >> ZVex Box of Rock
My LOOP 1 chain is an alternative way of how to create a three-route signal path with one input and one output if an A/B/C switch isn't available. Two A/B switches and two Y-cables/signal splitters are required for this. A/B Switch 1 chooses between Route 1 and either Route 2 or Route 3, while A/B Switch 2 chooses which route (either Route 2 or Route 3) will be sent to the "B" input of A/B Switch 1. Dual-output (not stereo) pedals such as the BOSS TU-2 or the MXR Kerry King 10-band EQ can be used instead of Y-cables.
Experiment and have fun with multi-route switching! :)
what the?! hehe nice gear! damn.. tulo laway :-D
Title: Re: Post your pedalboard chain routing here!
Post by: the_Nong on November 29, 2007, 01:40:23 AM
guys; what pedal can i add up or pair with my os-2 to enhance the sound?
Title: Re: Post your pedalboard chain routing here!
Post by: juzaen on November 29, 2007, 02:48:02 AM
:-D ito po ang sakin mga sir.. gcb-95-->mxr comp-->sansampgt2-->mxrZWod-->ge-7-->ch-1-->delay-->AMP
Title: Re: Post your pedalboard chain routing here!
Post by: demoboi on December 11, 2007, 08:59:13 PM
sakin eto... GUITAR>HB01(modded)>CS100>GEORGE DENNIS SUSTAINER/DISTORTION/VOLUME>DAPHON E20OD>HM100>PB100>FL100>UC100>DD100>NG100>AMP \TUNER
sir, tama ba? confuse kasi kung ano una.. comp ba or wah.. Ung wah dpat daw raw signal from your guitar kasi eh.. OD>HM or HM>OD? :roll:
Title: Re: Post your pedalboard chain routing here!
Post by: pr3ach2all on December 11, 2007, 09:38:16 PM
makisali na rin nga :-D
guitar -> mxr dynacomp -> boss ds1 -> boss od2r -> boston eq100 -> ehx russian smallclone -> boss ss3 ->(soon to come boss ns2) -> amp
un lng.... :-D
Title: Re: Post your pedalboard chain routing here!
Post by: khuxielog on December 12, 2007, 12:35:37 AM
newbie here. tagal na akong tumitingin sa site na ito. ngyn ko lang naisip mgging member.. well here it goes..
guitar >> boss dm2 >> ts808 >> small fry >> ps3 >> dod fx22 >> ehx small stone >> ibanez de7 >> rv3 >>>>>> amp
medyo magulo pa..
Q: panu palitan ung username ko? pwede ba?
GAS ko : FD2, echopark, ebow, a better tremolo pedal than my vibrothang, a looper, retrosonic analog delay (whew!!! dami pala ah)
Title: Re: Post your pedalboard chain routing here!
Post by: demoboi on December 12, 2007, 12:46:29 AM
welcome to the site bro.. I think hindi na pwede..
Title: Re: Post your pedalboard chain routing here!
Post by: khuxielog on December 12, 2007, 01:06:29 AM
thnx. :-D
oh. d na pla pwde..
Title: Re: Post your pedalboard chain routing here!
Post by: markflo on December 12, 2007, 09:21:53 AM
Damn poundcake... That's crazy complicated! Haha
Title: Re: Post your pedalboard chain routing here!
Post by: mikomiko on December 12, 2007, 10:19:03 AM
hmm ako kc feel ko yung tunog kapag ganito order ehh
GUITAR>>TS9>>BOSS ME50>>BEHRINGER GDi21>>BBE SONIC STOMP MAXIMIZER>>AMP
Any comments po.. to sound better or yung proper order ng chain
Title: Re: Post your pedalboard chain routing here!
Post by: kawayan_strat on December 12, 2007, 12:08:55 PM
welcome to the site bro.. I think hindi na pwede..
Ewan ko lang.Kasi si Poundcake iba username niya dati, "venusisle5150" pa tapos biglang naging "Poundcake"
@khuxielog, PM mo si Poundcake,tanong mo kung pwede.
Title: Re: Post your pedalboard chain routing here!
Post by: tseeno on December 12, 2007, 12:23:45 PM
here's my setup for my violin. pasali. :)
violin > tu-100 > LS-2 (on mix A+B) > LOOP A (OD-3 > CS-2 > GE-7) > LOOP B (FW-3 > Dano EQ)
> PS-2> DD-100 > dano Reverb > ART V3 Studio Pre > amp
Title: Re: Post your pedalboard chain routing here!
Post by: mariachi on December 12, 2007, 10:30:45 PM
here's my routing:
guitar -> rmc2 -> looper -> loop/channel A (zim) | -> loop/channel B (arion chorus - phase 90 - nova delay) | -> amp
kung mali, pa-suggest na lang kung pano ba dapat though nagwowork naman sakin yung ganitong routing. bago ko pinagawa yung looper ko yan na yung nasa utak ko hehe :-D
yung switches ng looper ko same as the gap between visual sound's footswitches, para pwede ko ma-engage yung 2 channels OR switch between two channels in one stomp. kunwari on yung channel A then off yung B, sabay ko apakan yung switch para mag-off yung A then mag-on yung B. ginagawa ko yan para mag-switch from dirt (zim) to clean (chorus) or vice-versa.
gusto ko nga sana mala midi pero di pala pwede :-D
Title: Re: Post your pedalboard chain routing here!
Post by: spife on December 12, 2007, 10:44:51 PM
guitar >> Boston OD100 >> Boss DS2 >> GTX EQ100 >> Behringer DD100 >> amp
sakto ba?? tama ba pagkasunod sunod?? di ko lam kung mauna ba eq or after the drive pedals?? comments pls.. tnx!! :-D :-D
Oks na yan bro. Though you could try DS-2 >> OD-100 pag pam-boost ng leads gusto mo. Kaso syempre, all up to you pa rin. :-D
Title: Re: Post your pedalboard chain routing here!
Post by: flyingkickpenguin on December 22, 2007, 09:59:31 PM
AMP > CH-100> FL-100 > HM-100 > DS-2 > Main Squeeze > Gitara rah rah rah!
Madadagdagan to sa darating na pasko :evil: :evil: :evil: hahah
Title: Re: Post your pedalboard chain routing here!
Post by: noto.emo on December 23, 2007, 09:47:00 AM
new here... strat/epi specialII(wish i could get a prs custom/soapbar)heheh> (gcb-95.optional)>>ds-2>>dd-3>>gfx-8>amp...no pedalboard wish to make one... no idea how to setup....got problems on humming(dahil sa ds-2 ska strat cyempre)hehehe balak ko mag avail ng ns-2... baka may nagbebenta ng mura? rock :-D open to suggestions :-)
Title: Re: Post your pedalboard chain routing here!
Post by: rakistangel on December 23, 2007, 05:46:32 PM
Guitar --> Boston NG100 --> Daphon Compressor --> Danelectro Pastrami OD --> DS-2 --> Boston HM100 --> Boston EQ100 --> Lazer PSM --> (send-return: Danelectro Fab Chorus --> Zoom G1) --> amp
pahingi naman ng comments o suggestions. :mrgreen:
saka tanong. kung bibili ako ng pitch shifter (Boss PS-2) or octaver (Boss OC), san ko siya dapat ilagay sa chain? :-)
suggestion ko lang is bawasan mo ung pedals mo para lumabas ung natural tone ng wood ng guitar mo. with that much pedal na naka series lang im sure theres a major tone suck
Title: Re: Post your pedalboard chain routing here!
Post by: BossingBoss on December 24, 2007, 01:24:46 AM
eto na lang natira sa akin ngayon:
guitar ---> boss TU-2 ---> boss sd-2 ---> boss ds-1 (modded by jackbauer) ---> boss ph-1r ---> amp :-)
daling dalhin kaya masaya na muna ko sa set-up na yan... :wink:
sa tingin ko, isang magandang fender/marshall/mesa boogie tube amp tas isang gibson les paul standard lang set-up mo hindi mo na kelangan na napakaraming effects...yun nga lang medyo pag iipunan ng matagal-tagal pag ganung gears yung gusto mo...
Title: Re: Post your pedalboard chain routing here!
Post by: jonats on December 24, 2007, 01:06:23 PM
join ako. here's my chain:
guitar->A/B switcher->mxr 6-band eq->5-band parametric eq->boss ns2->amp(fender fm210R for clean,crate GT3500H for metal tone)
this chain is simple pero for me its heavy lalo na ung gain coming from GT3500H.
Title: Re: Post your pedalboard chain routing here!
Post by: spife on December 24, 2007, 02:53:17 PM
suggestion ko lang is bawasan mo ung pedals mo para lumabas ung natural tone ng wood ng guitar mo. with that much pedal na naka series lang im sure theres a major tone suck
hehe salamat :-) try ko nang bawasan. :-D makakatulong din ba kung yung modulation effects eh idaan ko sa send-return ng amp? :-)
Title: Re: Post your pedalboard chain routing here!
Post by: Bart on December 24, 2007, 05:02:33 PM
I read in one of the guitar forums that placing the fuzz before the tone press gets better tone. Since my board is not all true bypass, the DT-10 tuner at the end will act as buffer and clear the signal. The wah.... para maiba naman.
Title: Re: Post your pedalboard chain routing here!
Post by: juan sinko on December 24, 2007, 10:08:12 PM
ito chain ko bago ko benta yung ch1 yesterday :
AMP- DM3- GA30-CH1- SD1-FW3 -WASBURN WI24 Guitar or genesis m313
Title: Re: Post your pedalboard chain routing here!
Post by: juvzleyn on December 25, 2007, 05:57:54 AM
Here's mine:
Line 6 ToneCore Constrictor - Dunlop 535Q Wah - Boss TU2 - MXR Phase 90 - Radial Tonebone TRIMODE - Boss ML2 Metal Core - Boss DD3 - AMP
Title: Re: Post your pedalboard chain routing here!
Post by: swinger on December 25, 2007, 06:25:21 AM
pwede ba ko sumali??
cable>GT6>cable :-D
Title: Re: Post your pedalboard chain routing here!
Post by: tam_guitar on December 25, 2007, 09:33:46 AM
Ang tiyaga mo ah, talagang guitargeeked pa. May templates ka ba nung individual pedals? :)
Title: Re: Post your pedalboard chain routing here!
Post by: Lahed92801 on December 26, 2007, 04:52:11 AM
as of this week :-D
Gtr->Hikari->Vox Wah->Bigshot looper (in the loops: loop 1- Sansamp GT-2 and Ibanez TS9DX, Loops 2-MI Audio Tubezone)->Boston EQ-100 (DUN DUN DUN :-D)->Boss CH-1->Boss DD-6
Title: Re: Post your pedalboard chain routing here!
Post by: vin12 on December 26, 2007, 06:26:59 PM
i-update ku lang
Title: Re: Post your pedalboard chain routing here!
Post by: juan sinko on December 26, 2007, 06:40:35 PM
benta mo na lang sa akin yung bf2 mo o ce5 mo ano hehehehe
Title: Re: Post your pedalboard chain routing here!
Post by: vin12 on December 26, 2007, 06:45:36 PM
satsfied na ako sa tunog nito,, hehe, :mrgreen: :-D :-)
Title: Re: Post your pedalboard chain routing here!
Post by: juan sinko on December 26, 2007, 06:55:33 PM
cge na benta mo na sa akin yan plsssss im gassing eheheheheh
Title: Re: Post your pedalboard chain routing here!
Post by: vin12 on December 26, 2007, 07:00:26 PM
ndi talaga puwede brad eh
Title: Re: Post your pedalboard chain routing here!
Post by: the_Nong on December 27, 2007, 12:47:38 PM
ganda rin nito.. but do a regular rhythms section need this? advice po..
Frankly, we could have made this article much shorter by simply saying: There are no rules; whatever makes the sound you’re after is how to do it. But if you use these guidelines, you’ll keep noise to a minimum, and give your pedals the optimum signal characteristics they need to work their best. So try these rules (or suggestions if rules are not your thing) and see how they work for you. Tone is king!
Title: Re: Post your pedalboard chain routing here!
Post by: vin12 on December 27, 2007, 06:12:52 PM
Frankly, we could have made this article much shorter by simply saying: There are no rules; whatever makes the sound you’re after is how to do it. But if you use these guidelines, you’ll keep noise to a minimum, and give your pedals the optimum signal characteristics they need to work their best. So try these rules (or suggestions if rules are not your thing) and see how they work for you. Tone is king!
sir try muna unahin ung cs-3 bago ung wah pedal, para pati ung wah pedal mo madaanan ng cs-3, tnx
Title: Re: Post your pedalboard chain routing here!
Post by: blue_raven on December 27, 2007, 07:13:01 PM
here's my current rig:
guitar -> GCB-95 ->Boss CS3 -> custom ABY switcher -> channel A: Marshall ShredMaster -> Boss OD3 -> Dirt Amp Dirt Amp efx loop send: Boss TR2 -> Boss CH1 -> Digitech DigiDeleay -> efx loop return channel B: Boss AC3 -> Rocktron Tsunami -> Clean amp
soon to add more modulation pedals for my clean channel. :-D
Title: Re: Post your pedalboard chain routing here!
Post by: the_jj on December 27, 2007, 07:18:09 PM
bakit po halos lahat ng setup <nakita ko> nauuna yun wah pedal?
so..sinubukan ko ganun setup ko... hindi gumagana yung boost..or ganun lng talaga pag hellbabe wah?
kaya lagi nauuna wah para kumapit ung tunog ng wah kapag naka on and drive, try mu unahin ang drive before wah, ndi masyado kapit ang tunog ng wah kapag naka on ang drive
Title: Re: Post your pedalboard chain routing here!
Post by: powerchord41 on December 27, 2007, 10:21:39 PM
bakit po halos lahat ng setup <nakita ko> nauuna yun wah pedal?
so..sinubukan ko ganun setup ko... hindi gumagana yung boost..or ganun lng talaga pag hellbabe wah?
hmmm... ang setup ko din sa una ang wah pedal ko naka hellbabe din ako pero sweep moded siya... swabe naman yung tunog na nakukuha ko (for my ears that is) tapos mas swabe din siya kapag naka on ang iba mong effects rinig na rinig padin ang sweep ng wah... ni testing ko kasi din na nasa iba ang position ng wah pero ang pinaka ayos talga eh sa una... parang nawawala kasi or nag iiba ung tunog kapag ung wah eh nasa gitna ng chain...
Title: Re: Post your pedalboard chain routing here!
Post by: badongrodrigs on December 27, 2007, 10:30:29 PM
kaya lagi nauuna wah para kumapit ung tunog ng wah kapag naka on and drive, try mu unahin ang drive before wah, ndi masyado kapit ang tunog ng wah kapag naka on ang drive
kanya kanya lang yan. there are players who place their wahs after the drive (or even last).
Title: Re: Post your pedalboard chain routing here!
Post by: tweenty-seven on December 27, 2007, 10:39:21 PM
hmmm... ang setup ko din sa una ang wah pedal ko naka hellbabe din ako pero sweep moded siya... swabe naman yung tunog na nakukuha ko (for my ears that is) tapos mas swabe din siya kapag naka on ang iba mong effects rinig na rinig padin ang sweep ng wah... ni testing ko kasi din na nasa iba ang position ng wah pero ang pinaka ayos talga eh sa una... parang nawawala kasi or nag iiba ung tunog kapag ung wah eh nasa gitna ng chain...
anu po setup nyo sa hellbabe? yung mga knobs po? range?
pa-gaya din po! :lol:
Title: Re: Post your pedalboard chain routing here!
Post by: tweenty-seven on December 27, 2007, 10:41:38 PM
kaya lagi nauuna wah para kumapit ung tunog ng wah kapag naka on and drive, try mu unahin ang drive before wah, ndi masyado kapit ang tunog ng wah kapag naka on ang drive
kailangan ko pa po ng konting knowledge about sa terms...
anu po yung drive? :?pag kakaintindi ko.. eto po ba yung ibang effects like mt-2 ..etc?
Title: Re: Post your pedalboard chain routing here!
Post by: badongrodrigs on December 27, 2007, 10:51:24 PM
anu po setup nyo sa hellbabe? yung mga knobs po? range?
pa-gaya din po! :lol:
nye! sige ito gamit ko... ung sa gilid ito ung maliit na knobs... boost is 3 o'clock. Q is max, Fine is Max... ung sa silver sa right side ung boost is 3 clicks after sa minimum... pero minsan nilalagay ko sa max... hehe.. ung sa ilalim pala ung bypass timer ko is naka long... pero personal preference mo nalang un...
Title: Re: Post your pedalboard chain routing here!
Post by: XFree on December 27, 2007, 11:06:19 PM
nye! sige ito gamit ko... ung sa gilid ito ung maliit na knobs... boost is 3 o'clock. Q is max, Fine is Max... ung sa silver sa right side ung boost is 3 clicks after sa minimum... pero minsan nilalagay ko sa max... hehe.. ung sa ilalim pala ung bypass timer ko is naka long... pero personal preference mo nalang un...
tnx! hehe.. try ko nga.. pwde ba i modify ang hellbabe? i mean gusto ko yung parang mahaba yung "waaahh-waahh" parang sa hallelujah ng bamboo... medyo bitin yung "sweep <tama po ba term>" ng hellbabe eh
Title: Re: Post your pedalboard chain routing here!
Post by: vin12 on December 28, 2007, 12:22:52 PM
ung sa solo ba ng hallelujah ng bamboo, wah and may halong delay
Title: Re: Post your pedalboard chain routing here!
Post by: tweenty-seven on December 28, 2007, 04:21:35 PM
more on: guitar (squier fat strat/epiphone sg deluxe) > behringer cs-100 > boss mt-2 modded > boss sd-1 modded >boston engr eq-200 > boston engr ch-200 > peavey envoy110 (or any amp) still waiting/looking a wah/volume control pedal for that sapce over there...
or pag rakrakan: guitar (squier fat strat) > boss sd-1 modded > boston engr eq-200 > any amp.
Title: Re: Post your pedalboard chain routing here!
Post by: incubus32 on January 26, 2008, 09:35:33 PM
Applicable yang "less is more" kung iisang type ng music ang tugtugan.
sorry, but i beg to disagree.. unless you try to copy an artist of a certain cover.. in my case, i'm the vocalist and i do rhythms.. and i have my own sound.. it worked with others before, take note of the pedals:
just like hendrix: (http://guitargeek.com/rigs/img/h/hendrix_jimi_1968.gif)
dave grohl: (http://guitargeek.com/rigs/img/f/foofighters_dave_2000.gif)
eric clapton with cream: (http://guitargeek.com/rigs/img/c/cream_eric_1968.gif)
kurt cobain: (http://guitargeek.com/rigs/img/n/nirvana_kurt_1993.gif)
tom morello: (http://guitargeek.com/rigs/img/r/ratm_tom_1998.gif)
and many more.. how could they go wrong?
Title: Re: Post your pedalboard chain routing here!
Post by: fraudulentzodiac on February 29, 2008, 08:37:52 AM
you'll need a lot of pedals or at least a MFX if you do a lot of covers, say play for a showband. I assume sir Mark plays for a band of the same nature.
anyway, paano naman to? (http://guitargeek.com/rigs/img/e/ericjohnson_2001.gif) it's pretty obvious whose board this is hehe. :lol: is it too much for what he does?
Title: Re: Post your pedalboard chain routing here!
Post by: the_Nong on February 29, 2008, 08:48:41 AM
sabagay...
wow! grabe si eric johnson! hehehehe...
Title: Re: Post your pedalboard chain routing here!
Post by: kawayan_strat on February 29, 2008, 05:04:19 PM
you'll need a lot of pedals or at least a MFX if you do a lot of covers, say play for a showband. I assume sir Mark plays for a band of the same nature.
anyway, paano naman to? (http://guitargeek.com/rigs/img/e/ericjohnson_2001.gif) it's pretty obvious whose board this is hehe. :lol: is it too much for what he does?
Exactly! My band plays standards to moderate rock to latin etc.. Sa tingin ko you will need all the help you can get in nailing the sound/tone requirement.
Title: Re: Post your pedalboard chain routing here!
Post by: mrbrownstone on March 03, 2008, 10:37:12 AM
its been one year since i came back to guitar playing, same time i got into philmusic and got into GAS :-D
well over the year, gears come and go off my pedal board until i get to hear the tone in my head, well, not exactly like it but this is the nearest i can get to it :-D ive realized also that in our band, i dont use clean at all so i opted for the jcm which doesnt clean up but gives me the crunch that i need
Les Paul Classic with a pair of SD Alnico II pro-->Slash wah-->TS808-->TU-2--> modified 50 watt JCM800 combo-->Fx send--> MXR noise gate-->FX return
Title: Re: Post your pedalboard chain routing here!
Post by: stabwounds on March 03, 2008, 11:27:18 AM
heres my simple setup ginamit ko na yung master switch sa cry baby para madali na lang ma on and off :-)
Title: Re: Post your pedalboard chain routing here!
Post by: ommantra on April 08, 2008, 02:34:59 AM
ako naman...
Amp>NS2>DD3>SD1>PH2>PH2>MD2>Dimebag wah>Guitar
yung NS2 ko ngayon on sale...gusto ko kc palitan ng TU2 o khet anong magandang stomp box na tuner dyan... tpos gusto ko pang dagdagan n compression sustainer, reverb, digitech multi chorus and BF3...kaso alaws pa budget tsaka di ko pa napapagaralan kung anong routing gagawin ko pag dinagdag ko yung mga pedal na yan...
Title: Re: Post your pedalboard chain routing here!
Post by: boncram on April 25, 2008, 08:39:35 PM
Hello.
Talaga po bang nauuna sa chain ang booster (ung karaniwang setup)? Di po ba nilalagay un after ng dirt pedal?
And if nauuna po talaga ang booster ano ang mas una, compressor o booster? Ty!
Title: Re: Post your pedalboard chain routing here!
Post by: tackielarla on April 25, 2008, 09:54:24 PM
Here's mine:
Fender Strat > Kord DT-10 > Vox Wah > Maxon OD-9 > Barber Direct Drive > MI Audio Tube Zone > Danelectro 7-band EQ > Ernie Ball VP Jr > Boss DD-20 > CGI M3 Tremolo/Phaser > Line 6 Verbzilla Reverb > Amp (depende sa place)
:lol:
Title: Re: Post your pedalboard chain routing here!
Post by: abstract on April 25, 2008, 09:55:11 PM
AMP <EHX delay < TC Electronics scf < Boss acoustic simulator < Emma rezza <
Next targets: Boss AC-2/3 Line6 Pocket POD for those "bakit walang amp dito???" moments
Title: Re: Post your pedalboard chain routing here!
Post by: rad_12 on April 26, 2008, 03:09:18 AM
tanong lang mga sir, ngayon lang ako bubuo ng pedal board i mean yung laman ng pedal board. gusto ko kasing i-retain yung zoom g2 tapos the rest is analog (as much as possible custom) mas ok ba kung center ng lahat ng analog pedals is yung g2 ko? curious lang ako mga sir all your opinions are accepted kahit dito sa thread or PM niyo ko open ako diyan para alam ko na. yoko kasing mag-dispose ng ganun-ganun na lang :-)
Title: Re: Post your pedalboard chain routing here!
Post by: demoboi on April 26, 2008, 09:50:05 AM
tanong lang mga sir, ngayon lang ako bubuo ng pedal board i mean yung laman ng pedal board. gusto ko kasing i-retain yung zoom g2 tapos the rest is analog (as much as possible custom) mas ok ba kung center ng lahat ng analog pedals is yung g2 ko? curious lang ako mga sir all your opinions are accepted kahit dito sa thread or PM niyo ko open ako diyan para alam ko na. yoko kasing mag-dispose ng ganun-ganun na lang :-)
dispose your g2 na. When I switched from multi to analog, walang regret talaga.
Title: Re: Post your pedalboard chain routing here!
Post by: rad_12 on April 26, 2008, 09:58:06 AM
problema sir wala pa akong pang-gas sa mga analog :-D
Title: Re: Post your pedalboard chain routing here!
Post by: dubista on April 26, 2008, 10:14:41 AM
guitar -> boss tu2 -> dunlop 95Q -> ehx soul preacher compressor/sustainer -> mi audio crunchbox -> super charged od -> ehx pulsar -> ehx smallstone -> digitech digidelay
Title: Re: Post your pedalboard chain routing here!
Post by: ommantra on April 26, 2008, 10:46:23 AM
tingin ko...mas maganda to pag may pix... :-D
Title: Re: Post your pedalboard chain routing here!
Post by: Stompbox on April 26, 2008, 09:03:45 PM
I occasionally throw in an Aria Flanger there somewhere when I feel it's needed.
Title: Re: Post your pedalboard chain routing here!
Post by: luin_theblue on April 26, 2008, 09:23:51 PM
Rad_12, maybe you could keep the g2 until you can get a full set of analogs. :) For example, if you have od/disto peds, use g2 for delays, chorus, flanger, etc., until you have cash to buy individual delay, chorus, flanger. By then, pampractice nalang yung g2. :)
Title: Re: Post your pedalboard chain routing here!
Post by: arkeetar on April 27, 2008, 05:31:41 AM
it works for me... kung kay rad_12 g2... akin gfx... pag heavy distortion,clean/dirty wah saka set ung delay and reverb dyan ko kinukuha sa gfx hindi ko lang talaga makabit sa chain ung gcb-95, hannga't di ko pa napapa mod at matanggal ng tuluyan ung gfx pero pag pang boost and mostly pang boost ko sa od and crunch, dun papasok mga stomps... again it works for me 8-)
Title: Re: Post your pedalboard chain routing here!
Post by: voidmain on April 27, 2008, 09:10:07 PM
tanong lang mga sir, ngayon lang ako bubuo ng pedal board i mean yung laman ng pedal board. gusto ko kasing i-retain yung zoom g2 tapos the rest is analog (as much as possible custom) mas ok ba kung center ng lahat ng analog pedals is yung g2 ko? curious lang ako mga sir all your opinions are accepted kahit dito sa thread or PM niyo ko open ako diyan para alam ko na. yoko kasing mag-dispose ng ganun-ganun na lang :-)
Wag mo munang i-dispose yung g2 mo bro. I'd go for analog drives and digtal modulations and delays. Lagay mo sa true bypass looper yung g2 kung may issue siya ng tone sucking.
Title: Re: Post your pedalboard chain routing here!
Post by: siore on April 27, 2008, 10:52:58 PM
Oo nga rad, sayang naman kung i-dispose mo. Napaka-compact ng g2, at ok sya for modulations and delays while waiting for your analogs. Ano ba analogs binabalak mo ilagay?
Title: Re: Post your pedalboard chain routing here!
Post by: vin12 on April 27, 2008, 10:53:42 PM
Title: Re: Post your pedalboard chain routing here!
Post by: raizen26 on July 28, 2008, 01:57:59 PM
DD2 pala yung delay ko hindi dd3 sorry... :-D (lintek na hang over to...)
Title: Re: Post your pedalboard chain routing here!
Post by: kune_km on July 28, 2008, 04:47:58 PM
here's mine:
Guitar - modded hellbabe - digitech badmonkey - brit mod ds1 - boss bf2 flanger - guyatone phaser - boss ch1 super chorus - boss nf1 noise gate - dod fx91 digital delay - amp
8-)
Title: Re: Post your pedalboard chain routing here!
Post by: farleysbeat on July 28, 2008, 05:25:26 PM
guitar talaga yang asa dulo? o baliktad sila nung amp? how do you use your g1x and gdi21 sa board mo sir? baka pwede makopya. hehe.
sorry sir mali yung type ko haha. na-edit ko na. :-D it's the other way around..
g1x: dito ko pinapadaan tunog ko. clean, reverb, delay at iba pang modulations dito ko rin kinukuha tapos patong na lang ng dirt at konting sundot ng mga modulations. mas kontrolado ko kasi like sa delay, tapak lang ng expression pedal pwede ko na ma-adjust yung rate noong effect. i don't have to kneel down and tinker with the settings. tapak lang at ayun na! :-)
gdi21: balak ko gamitin amp modeling niya kaso hindi ko pa nakakalikot. wala pa ko time e hehe. kapag nakapag-experiment na ko i'll update you sir. :-D
Title: Re: Post your pedalboard chain routing here!
Post by: farleysbeat on July 31, 2008, 09:40:23 PM
sorry sir mali yung type ko haha. na-edit ko na. :-D it's the other way around..
g1x: dito ko pinapadaan tunog ko. clean, reverb, delay at iba pang modulations dito ko rin kinukuha tapos patong na lang ng dirt at konting sundot ng mga modulations. mas kontrolado ko kasi like sa delay, tapak lang ng expression pedal pwede ko na ma-adjust yung rate noong effect. i don't have to kneel down and tinker with the settings. tapak lang at ayun na! :-)
gdi21: balak ko gamitin amp modeling niya kaso hindi ko pa nakakalikot. wala pa ko time e hehe. kapag nakapag-experiment na ko i'll update you sir. :-D
ok sir thanks sa info. yung pag-gamit mo sa g1x similar sa pag-gamit ko (dun dumadaan ang tunog being at the end of the chain). although naka-set lang sa fender tweed yung akin tapos pang-volume control lang yung expression pedal.
dati kasi yung gdi ang dulo ng board ko (ginamit kong pre-amp). yun ang naka-set sa fender tweed. nung nagkaron ako ng g1x, tinanggal ko na yung gdi at pinalit ko na yung g1x as pre-amp (i know, i know, mfx are not supposed to be used as such :lol:) dahil paki-ramdam ko it adds versatility sa board ko (albeit limited at that hehe). di ko pa nasubukan i-cascade yung dalawa.
antayin ko yung feedback mo tas mag-cheating ako. hehe. :evil:
Title: Re: Post your pedalboard chain routing here!
Post by: barneykols on July 31, 2008, 10:00:56 PM
ok sir thanks sa info. yung pag-gamit mo sa g1x similar sa pag-gamit ko (dun dumadaan ang tunog being at the end of the chain). although naka-set lang sa fender tweed yung akin tapos pang-volume control lang yung expression pedal.
dati kasi yung gdi ang dulo ng board ko (ginamit kong pre-amp). yun ang naka-set sa fender tweed. nung nagkaron ako ng g1x, tinanggal ko na yung gdi at pinalit ko na yung g1x as pre-amp (i know, i know, mfx are not supposed to be used as such :lol:) dahil paki-ramdam ko it adds versatility sa board ko (albeit limited at that hehe). di ko pa nasubukan i-cascade yung dalawa.
antayin ko yung feedback mo tas mag-cheating ako. hehe. :evil:
ah hehe ganon ba? dati ganyan din gamit sakin ng expression pedal eh. for volume control :-D pero i tried using the pedal assign feature niya and i liked what i heard. maganda output niya for me. :-)
don't worry sir, parehas tayo. bago ko makuha gdi21 ko pre-amp ko yung g1x. +1 sa versatility. :-D
Title: Re: Post your pedalboard chain routing here!
Post by: MelMe1 on August 03, 2008, 03:18:30 PM
Patulong naman mga Sir sa pagarrange ng aking effects. Ang effects ko ay screaming blues,hyper fuzz at chorus.
Ano ba ang dapat mauna ang Screaming blues o ang hyper fuzz? Saan ko ikakabit yung patch cable ko sa Screaming blues?Dalawa kasi yung output niya, may output 1 (Amp) Output 2 (Mixer)? Alin po dun sa dalawa?
Natry ko po yung setup na AMP>>>CHORUS>>>HYPER FUZZ>>>OUTPUT 2 (MIXER) SCREAMING BLUES>>>GUITAR
Ang problema ay kapag isabay kung gamitin ang hyper fuzz at screaming blues lalakas yung volume kahit volume 5 sa amp volume 5 sa Screaming blues at Volume 0 sa hyper fuzz. Ang ingay ng resulta at pangit yung tone na lumalabas.
Title: Re: Post your pedalboard chain routing here!
Post by: adok on August 09, 2008, 03:59:34 AM
eto akin
Guitar->korg dt-10->crybaby->looper
loop 1: ts9->ds-1->mt-2 loop 2: ehx small clone->ibanez de-7->artec se-adl
line 6 echo park (optional, pang trip lang actually)->ge-7->ehx holy grail-> peavey valve king 112
Patulong naman mga Sir sa pagarrange ng aking effects. Ang effects ko ay screaming blues,hyper fuzz at chorus.
Ano ba ang dapat mauna ang Screaming blues o ang hyper fuzz? Saan ko ikakabit yung patch cable ko sa Screaming blues?Dalawa kasi yung output niya, may output 1 (Amp) Output 2 (Mixer)? Alin po dun sa dalawa?
Natry ko po yung setup na AMP>>>CHORUS>>>HYPER FUZZ>>>OUTPUT 2 (MIXER) SCREAMING BLUES>>>GUITAR
Ang problema ay kapag isabay kung gamitin ang hyper fuzz at screaming blues lalakas yung volume kahit volume 5 sa amp volume 5 sa Screaming blues at Volume 0 sa hyper fuzz. Ang ingay ng resulta at pangit yung tone na lumalabas.
bro gamitin mo output un sa amp, wag sa mixer. aside from that, when you use 2 dirt, maingay talaga un, lalo na kapag parehas nakaset na mataas un gain. also, d lahat ng pedals maganda tumunog nka series (both on i mean). anyway, i have never used a fuzz, but the basic rule with dirt pedals is od->distortion->higher gain distortion->etc. pero rules sa pedal arrangements are not really rules, more like suggestions. depende na rin sayo kung pano mo gusto arrange.
but anyway, a basic rule that you can follow is:
guitar->volume pedal->wah->od->distortion->modulations->time based effects->reverb
pero ulit, suggestion lang naman eto :)
Title: Re: Post your pedalboard chain routing here!
Post by: Chito on August 09, 2008, 04:51:10 AM
Here's mine:
Guitar---> Korg Pitchblack --> Amp
:-D :-D :-D :-D
Title: Re: Post your pedalboard chain routing here!
Post by: raizen26 on August 09, 2008, 09:24:20 PM
may isa pa akong routing
guitar---->g2.1u---->amp hehehe! :-D
Title: Re: Post your pedalboard chain routing here!
Post by: farleysbeat on August 09, 2008, 11:01:30 PM
update lang ng mga routing ko:
board 1:
guitar -> crybaby -> tube monster -> ultra metal -> ame-1 -> amp PS: kenzu case: mang frank
guys i have a question, where do you usually put the noise gate on your board.
mine is: guitar > crybaby > digitech whammy > boss MD2 > bad monkey > mxr phase 90 > behringer dd100 > boston eq100.
where would the noise gate fit? at tama ba na eq100 and huli? your help would be greatly appreciated, tnx! :-D
bonne journee! :-D
Depende sa noise gate at sa gamit mo. Kung tatanggalin mo lang yung hum ng guitar mo, you can place it first in your chain. Kung pang-linis naman ng overall na tunog, place it after everything. Some noise gates/suppressors are better placed at the end, some are better placed in the middle. Depende talaga sa pedal at sa gamit mo sir. Btw, kung NS-2 or boston noise gate yan, place it before your delay pedal. Kung hindi, sayang yung delay pedal mo kasi baka mawala yung repeat niya dahil sa noise gate.
As for the EQ, ako ganyan gusto kong setup. Kasi gusto kong ma-shape yung overall tone ko as compared to shaping the tone of the guitar only. Pwede rin yang setup na yan kapag pam-boost mo siya ng solos though pwed rin after ng dirt pedals mo ilagay. Kung before everything naman, pwede siyang pang-shape ng tone ng guitar or pampa-kapal ng tone ng dirt pedals with only a slight increase in volume.
Anyway, just giving you options, kaw pa rin bahala bro. Hope this helps. :-D
Title: Re: Post your pedalboard chain routing here!
Post by: guitbox on August 21, 2008, 10:28:52 AM
update on my chain:
gtr > wah > od > od > dist > cho > delay > eq
:-D
Title: Re: Post your pedalboard chain routing here!
Post by: gitarakista27 on August 22, 2008, 06:41:56 AM
here's mine
Highway one tele->GCB95-F->BIG MUFF pi->BD2->Denio Phaser->Octaver->Delay->Vox VR30
Title: Re: Post your pedalboard chain routing here!
Post by: deathbymistake on August 22, 2008, 08:53:33 AM
ako din..
simpe set up lng muna..
hello kitty(squire strat) > mt2 > amp
:lol:
im happy na
Title: Re: Post your pedalboard chain routing here!
Post by: jm the mute on August 22, 2008, 08:58:50 AM
eto sa kin: the 2008 and beyond setup
yamaha sg-600 or sg-1000 > cable > marshall shredmaster or nobels odr-1 overdrive > cable > amp
Title: Re: Post your pedalboard chain routing here!
Post by: orangeogre on August 23, 2008, 12:11:19 AM
Strat or SG or Tele> Proctavia> BG95 Wah > G2D Creamtone > Subdecay Flying Tomato > LoveKraft Mojo Drive > Ibanez DE7 > Fender Pro Jr
Title: Re: Post your pedalboard chain routing here!
Post by: yjuangab on August 23, 2008, 08:51:57 AM
salamat may mga ganitong thread marami akong natututunan :-D
Title: Re: Post your pedalboard chain routing here!
Post by: myageoldthing on August 24, 2008, 09:56:05 AM
Depende sa noise gate at sa gamit mo. Kung tatanggalin mo lang yung hum ng guitar mo, you can place it first in your chain. Kung pang-linis naman ng overall na tunog, place it after everything. Some noise gates/suppressors are better placed at the end, some are better placed in the middle. Depende talaga sa pedal at sa gamit mo sir. Btw, kung NS-2 or boston noise gate yan, place it before your delay pedal. Kung hindi, sayang yung delay pedal mo kasi baka mawala yung repeat niya dahil sa noise gate.
As for the EQ, ako ganyan gusto kong setup. Kasi gusto kong ma-shape yung overall tone ko as compared to shaping the tone of the guitar only. Pwede rin yang setup na yan kapag pam-boost mo siya ng solos though pwed rin after ng dirt pedals mo ilagay. Kung before everything naman, pwede siyang pang-shape ng tone ng guitar or pampa-kapal ng tone ng dirt pedals with only a slight increase in volume.
Anyway, just giving you options, kaw pa rin bahala bro. Hope this helps. :-D
holy crap dude, you are awesome! thanks a bunch, dude! :)
Title: Re: Post your pedalboard chain routing here!
Post by: angeloesteban14 on August 24, 2008, 10:17:41 AM
guitar > g2.1u > hm-100 > amp
marami pa akong gass!! kulang pa yan! :-D
Title: Re: Post your pedalboard chain routing here!
Post by: rakistangel on August 25, 2008, 07:23:38 PM
anu ba dapat mauna? digitech grunge - Behringer od? gagamitin kong pang boost sna ang od, san ba dapat siya nakalagay?after or before the grunge to boost?
Title: Re: Post your pedalboard chain routing here!
Post by: milzer on August 25, 2008, 08:22:47 PM
anu ang effects pag nauuna ang modulation? diba dapat nasa unahan ang mga dirt? :-D
IMO depende sa preference bro. ako, i like it this way kasi for me, mas versatile since kaya ko naman mag-chip in ng modulations using my G1x. :-D lumalabas na i have modulations before and after my dirt pedals. :-) i don't know, it just works for me. hehe
Title: Re: Post your pedalboard chain routing here!
Post by: simon_divitico on August 26, 2008, 11:16:26 AM
Eto sakin, nagsisimula pa lang, suggest kayo kung ano magandang isunod bukod sa wah :-D
Title: Re: Post your pedalboard chain routing here!
Post by: mjpartinez on August 26, 2008, 11:24:16 AM
uhuh cheap everything tong saken :-D im a multi fan..
[washburn lyon wah mahavishnu sweep and volume mod] ---[zoom 606 multi fx]------ [danelectro fab metal depends sa guitar ko if i use this]----- [ behringer fx100 --secondary modulation pedal ko-because im cheap]--- [danelectro pb&j because im cheap -pretty good cheap delay though-- RC2 looper fooper station plus a mahavishnu tap switch-- [spliter--kase wala akong a/b selector/looper]---[ mini amp --] tpos yung isa sa totoong amp--- plus ebow (not part of the chain)
im thinking of puting the wah/ volume ped somewhere in the middle of the 606 and the fab metal - also thinking of getting a zoom g1x pero me sntimental value kase tong 606 -i also keep the last delay on everytime except kung clean
Title: Re: Post your pedalboard chain routing here!
Post by: rakistangel on August 26, 2008, 10:03:31 PM
IMO depende sa preference bro. ako, i like it this way kasi for me, mas versatile since kaya ko naman mag-chip in ng modulations using my G1x. :-D lumalabas na i have modulations before and after my dirt pedals. :-) i don't know, it just works for me. hehe
gets, ok din pala.. tnx sa info :-D
Title: Re: Post your pedalboard chain routing here!
Post by: barneykols on August 27, 2008, 03:26:43 PM
punta ka kasi sa bahay i have a WAH pedal try mo hehehe
Hehe siyempre magjajam tayo para sa beloved LP's! Napa-iri ako sa LP's mo eh, haha :-D
Title: Re: Post your pedalboard chain routing here!
Post by: strummer on September 08, 2008, 10:06:09 AM
update....
sold digitech dist....
Electric Guitar ->Dunlop 535Q Wah-> MXR Super Comp -> EHX Nano Phaser -> Lipton A/B Box->Digitech Multi Chorus->Mixer/ Amp | Acoustic Guitar
**for some reason, my acoustic worked with the multichorus. di ko na kailangan ng preamp!!! heheh. overdrive, delay and amp sim na lang!!
Title: Re: Post your pedalboard chain routing here!
Post by: dextoi on September 08, 2008, 11:40:20 AM
here's mine:
SG(copy) -> Marshall BB-2 -> Boss FW-3 -> DOD Grunge (modded) -> DOD icebox ->amp
:D
Title: Re: Post your pedalboard chain routing here!
Post by: erniebong on September 08, 2008, 06:02:04 PM
I switched to a hybrid setup.... Guitar - wah - tuner - AX30g (for clean,mod,delay combo) expression pedal for ax30g - EQ (for solo mid boost)- Vibrothang c/o poundcake. (nice pedal i get leslies, tremolo, and phase sounds from this single pedal)
Title: Re: Post your pedalboard chain routing here!
Post by: myageoldthing on September 13, 2008, 12:55:14 PM
These are my gear, I still don't have PEDAL BOEAD......................... Everytime I finished setting up my gear the band is already packing their stuff and ready to get home.... :x http://i186.photobucket.com/albums/x139/rogeryu_ph/MyGear-1.jpg[/img]](http://i186.photobucket.com/albums/x139/rogeryu_ph/MyGear-1.jpg) (http://[img width=600 height=450)
That's why I tossed it all into the BIN and just bought a GT10 for good :lol:
Akin na lang? Kung ayaw mo na! Sayang eh! Yung Tubescreamer lang.
Ok this is it.... Package deal... TS9 modded 808/ Boss Metal zone stock/ DR. Boogey/Chorus/Rebote Delay/Boss NS2 noisegate. Bid your price... 09175241312 COD/ pickup at LAS PINAS SM SOUTHMALL
Roger
Title: Re: Post your pedalboard chain routing here!
Post by: kadyubaldo on September 19, 2008, 03:52:47 PM
Mga Boss at Sirs, Pwede ba to? Guitar>NS2>CS3>CH1>MT2>Bad monkey>Mesa dual rectifier>Line 6 Spider 3 Amp.
Title: Re: Post your pedalboard chain routing here!
Post by: frivers on September 19, 2008, 04:24:48 PM
update sa chain ko:
amp-dd3-g2.1u-eq-power grid-df7-bad horsie1
Title: Re: Post your pedalboard chain routing here!
Post by: pao2pao16 on September 19, 2008, 07:38:20 PM
question about tremolo placement. whats the difference between putting the tremolo before the distortion and after? hehehe :-D
Try mo either way. Pero feeling ko di mo magugustuhan ang before distortion. Recommended tlga ang modulations after distortion. Kasi basically the tremolo will "tremolo" the distortion kung after. Pero kung before ung iddistort ng distortion ang tremolo.
Title: Re: Post your pedalboard chain routing here!
Post by: kiiimpoiii on September 19, 2008, 08:30:53 PM
pre akin e2 set up q...... guitar-----> hellbabe wah---->>> digitech rp50---->>>>marshall drive master vintage----->behringer compressor----->>>> boston eq 100 ----->>> amp..... mr. MODERATOR tama lng po b set up q???
okie din b kung mag aadd aq ng DS-1/ behringer guitar amp selector/ dd600& dd100 behringer/ boss loopstations????
kei lng b un???? pnung chain b mgnda????? ska for what use po b ung line selector mejo nalilito po kxe aq kpag may line selector na ehhh.... thx for help....
Title: Re: Post your pedalboard chain routing here!
Post by: shodawmoon on September 19, 2008, 09:58:23 PM
pre akin e2 set up q...... guitar-----> hellbabe wah---->>> digitech rp50---->>>>marshall drive master vintage----->behringer compressor----->>>> boston eq 100 ----->>> amp..... mr. MODERATOR tama lng po b set up q???
okie din b kung mag aadd aq ng DS-1/ behringer guitar amp selector/ dd600& dd100 behringer/ boss loopstations????
kei lng b un???? pnung chain b mgnda????? ska for what use po b ung line selector mejo nalilito po kxe aq kpag may line selector na ehhh.... thx for help....
bawal po text speak dito. baka masita po kayo ng moderator. :-D (read rules and regulations) peace :-D
Title: Re: Post your pedalboard chain routing here!
Post by: the_Nong on September 20, 2008, 11:58:02 AM
currently:
my favorite! Strat > DOD YJM308 > Boss BD-2 > amp
Flying V > Boss TU-2 > Boston CH-200 > Ibanez AW7 > Boss FZ-5 > DOD YJM308 > Boss BD-2 > boston DD-200 > amp
Title: Re: Post your pedalboard chain routing here!
Post by: pao2pao16 on September 20, 2008, 01:18:56 PM
guitar > boss ns2 > modded vox v847 > looper > A = bad monkey > sansamp gt-2 B = boss ac-3 > EHX small clone > morley little alligator > delay pedal by lipton.
Title: Re: Post your pedalboard chain routing here!
Post by: tam_guitar on September 20, 2008, 03:03:24 PM
Magtatanong na rin ako. ngyn lang ako nakabili ng mga peds kaya di pa ganun kapamilyar sa set up. Meron akong:
1. Ibanez DS7 (distortion) 2. Boss CH-1 Super Chorus 3. Boss AC-3 Acoustic Simulator 4. Boss PH-3 Phase Shifter 5. Boss BF-2 Flanger 6. Arion Tube Mania (for OD/Dist)
Ano kayang magandang pagkakasunod sunod nyan? Salamat sa makakasagot nito.
Kung ako yan:
Boss AC-3 >> Ibanez DS-7 >> Arion Tube Mania >> Boss CH-1 >> Boss PH-3 >> Boss BF-2
May ibang nagsasabi na mas maganda raw yung modulations before the dirt pedals. Your call pa rin bro. Subukan mo every possible combination and come up with your own. :-D
Title: Re: Post your pedalboard chain routing here!
Post by: lenmc on September 29, 2008, 07:17:02 PM
Boss AC-3 >> Ibanez DS-7 >> Arion Tube Mania >> Boss CH-1 >> Boss PH-3 >> Boss BF-2
May ibang nagsasabi na mas maganda raw yung modulations before the dirt pedals. Your call pa rin bro. Subukan mo every possible combination and come up with your own. :-D
Salamat tol. halos di rin ngkaiba ung style ko sa suggestions mo. tnx
Title: Re: Post your pedalboard chain routing here!
Post by: dalandan on September 29, 2008, 07:31:38 PM
hmm.. my routing:
guitar - rat - echo - amp
Title: Re: Post your pedalboard chain routing here!
Post by: dime001 on September 29, 2008, 08:08:21 PM
Title: Re: Post your pedalboard chain routing here!
Post by: everpogi on September 30, 2008, 03:36:15 PM
eto ang sa'kin
GUITAR SETUP
guitar -> Behringer TU100 Tuner -> Boss MT-2 Metal Zone -> Boss PH-2 Super Phaser -> Behringer UT100 Tremolo -> Boss CH-1 Super Chorus -> Boss PS-2 Digital Pitchshifter/Delay -> Behringer DD400 Digital Delay -> Behringer GDI21 -> guitar amp
paano po magandang set-up s mga pedals ko yung tamang pgkakasunod-sunod?=,dd6,tubescreamer,sd1,ge7,phase90
its always: guitar > wah > compression sustainer > od/distortion > modulations > delay > reverb > eq. thats the general flow as provided by this digitech booklet thingy :-D
Title: Re: Post your pedalboard chain routing here!
Post by: locoto on October 04, 2008, 10:21:26 AM
sir kay sir ael_israel po ba kayo umorder ng pro co rat?
order ka lang kahit kanino... kay ael or bossingboss... either way, you'll still get the pedal...
Title: Re: Post your pedalboard chain routing here!
Post by: kiiimpoiii on October 09, 2008, 10:04:17 AM
weee e2 na ung bgong chain q s guitar!!!!.....
behringer eq700>>>>behringer cs100>>>>> behringer spectrumenhancer>>>>>behringer gdi21>>> boss loopstation1>>> danelectro talkbox>>>ernieball volumepedal>> tuner >>> line selector!
yan ung mga pang enhance q ng clean sounds cla dpat ung nsa unahan ng chain
tpos ung mga modulation nmn ang isusunod pra maenhance ung gnda ng modulation n mga effects
khit magkabaliktad baliktad na xempre except sa delay bsta unahin un
behringer dd600>>behringer dd100>> behringer dr 600mxr phase90>> behringer space chorus 200>>> boss tremolo 2>>> boss flange2 >> line selector
kea dlawa ung delay kxe pra hndi aq mhirapan mag set ng delays n mahina and ung mahahaba.... hehhehe gnda kxe behringer ehhh mura n gnda poa 2nog hhheehehe
tpos ska q na ipapasok ung drives q and wah....
Behringer pre amp booster>>>marshall drive master(vintage sound)>>>> boss MT2>>> boss DS1(british MOD) >>>> ibanez ts808>>> behringer hellbabe wah>>>ibanez demon wah>>>> guitar
kea hndi q cnama s mga drives q ung gdi21 kxe for clean guitar purposes lng un tpos nilagyan q ng pre amp booster pra sa lead parts.....
mukha xang magulo pero i love it nmn ang msamang palad lng is hndi aq mkabili ng pedal board for it kea aq n gumawa for my own
yan lng dba ang simple???? hahhaha gnda nmn kxe mga presets sa bossme50 ehhh
pero i suggest kung bago k nmn at gus2 mo medyo tipid e2 gwin mo
boston eq100>>> behringer cs100>> behringergdi21>>> behringerXV amp or digitechrp50 or higher (wag na zoom weaks yun)>>> hell babe or any other wah na trip mo
1.) ung sa may multi fx part ung behringer xv amp kxe pinagkopyahan nya dun s mga presets nya is yung mga mgagandang stompbox makers (e.g. boss, mxr, ibanez, and many more) ung digitech nmn ehh world known cla s mga multifx kea tiwala aq..... unlike zoom na mahinang klase at namimili ng amps... ska FYI po na mahina ang mga buttons and wirings ng zoom hndi mo xa pdeng i mod kxe very sensitive and mgulo ang wirings kxe gling japan and china ehhh unlike ng digitech us tlga ung behringer nmn germany made...kea they rock but still zoom sucks 2.) behringer gdi21 mgnda yan may mga pre amps n din jan kea lng sana nilagyan n nila ng rectifier pra mkatipid ung mga guitar players s pagbli pa ng distortion at metal effects.......meron kxe jang clean/boutique , hot rod(e2 ung OD), British, and many more angas n2 menvery useful ska metal casing tohh hndi n e2 plastic
3.) boston eq 100 and behringer cs100
okie n 2ng mga tohh i use them for enhancing my sound (kea aun lagi clang nkabukas hahahhaah) kahit e2ng dalawa lng gmitin mo mararamdaman mo ung gnda ng 2nog na nagagawa mo... kht ang guitar mo is RJ na gwang plipinas lng ehh swabe panalo pra kang nka fender usa hahahah
4.) WAH d2 nmn kht anu pero try mong hanapin ung madaming pinipihit kxe xempre cgurado masmgnda 2nog nun.... kht sabhin mong behringer hell babe gmit mo ehhh ggnda yun tiyak dhil sa eq at cs mo lalo na kpag may gdi21 pa dba???
NOTE: ehh anu kung cheap ung ibang effects kung pagsasamasamahin mo clang lhat edi ggnda 2nog mo dba??? kht nba boston pa yan kxa nmn s boss na ubod ng mahal dba ????
kea importante buy wise!!!!
try mo din s mga music store muna ung effects bgo k bumili pnapagamit nmn nila yun ehh part ng sales nila un
* next time llgay ko ung pics nung mga chains ng effects q pti ung pnaka board q
Title: Re: Post your pedalboard chain routing here!
Post by: angeloesteban14 on October 11, 2008, 10:47:44 AM
behringer eq700>>>>behringer cs100>>>>> behringer spectrumenhancer>>>>>behringer gdi21>>> boss loopstation1>>> danelectro talkbox>>>ernieball volumepedal>> tuner >>> line selector!
yan ung mga pang enhance q ng clean sounds cla dpat ung nsa unahan ng chain
tpos ung mga modulation nmn ang isusunod pra maenhance ung gnda ng modulation n mga effects
khit magkabaliktad baliktad na xempre except sa delay bsta unahin un
behringer dd600>>behringer dd100>> behringer dr 600mxr phase90>> behringer space chorus 200>>> boss tremolo 2>>> boss flange2 >> line selector
kea dlawa ung delay kxe pra hndi aq mhirapan mag set ng delays n mahina and ung mahahaba.... hehhehe gnda kxe behringer ehhh mura n gnda poa 2nog hhheehehe
tpos ska q na ipapasok ung drives q and wah....
Behringer pre amp booster>>>marshall drive master(vintage sound)>>>> boss MT2>>> boss DS1(british MOD) >>>> ibanez ts808>>> behringer hellbabe wah>>>ibanez demon wah>>>> guitar
kea hndi q cnama s mga drives q ung gdi21 kxe for clean guitar purposes lng un tpos nilagyan q ng pre amp booster pra sa lead parts.....
mukha xang magulo pero i love it nmn ang msamang palad lng is hndi aq mkabili ng pedal board for it kea aq n gumawa for my own
yan lng dba ang simple???? hahhaha gnda nmn kxe mga presets sa bossme50 ehhh
pero i suggest kung bago k nmn at gus2 mo medyo tipid e2 gwin mo
boston eq100>>> behringer cs100>> behringergdi21>>> behringerXV amp or digitechrp50 or higher (wag na zoom weaks yun)>>> hell babe or any other wah na trip mo
1.) ung sa may multi fx part ung behringer xv amp kxe pinagkopyahan nya dun s mga presets nya is yung mga mgagandang stompbox makers (e.g. boss, mxr, ibanez, and many more) ung digitech nmn ehh world known cla s mga multifx kea tiwala aq..... unlike zoom na mahinang klase at namimili ng amps... ska FYI po na mahina ang mga buttons and wirings ng zoom hndi mo xa pdeng i mod kxe very sensitive and mgulo ang wirings kxe gling japan and china ehhh unlike ng digitech us tlga ung behringer nmn germany made...kea they rock but still zoom sucks 2.) behringer gdi21 mgnda yan may mga pre amps n din jan kea lng sana nilagyan n nila ng rectifier pra mkatipid ung mga guitar players s pagbli pa ng distortion at metal effects.......meron kxe jang clean/boutique , hot rod(e2 ung OD), British, and many more angas n2 menvery useful ska metal casing tohh hndi n e2 plastic
3.) boston eq 100 and behringer cs100
okie n 2ng mga tohh i use them for enhancing my sound (kea aun lagi clang nkabukas hahahhaah) kahit e2ng dalawa lng gmitin mo mararamdaman mo ung gnda ng 2nog na nagagawa mo... kht ang guitar mo is RJ na gwang plipinas lng ehh swabe panalo pra kang nka fender usa hahahah
4.) WAH d2 nmn kht anu pero try mong hanapin ung madaming pinipihit kxe xempre cgurado masmgnda 2nog nun.... kht sabhin mong behringer hell babe gmit mo ehhh ggnda yun tiyak dhil sa eq at cs mo lalo na kpag may gdi21 pa dba???
NOTE: ehh anu kung cheap ung ibang effects kung pagsasamasamahin mo clang lhat edi ggnda 2nog mo dba??? kht nba boston pa yan kxa nmn s boss na ubod ng mahal dba ????
kea importante buy wise!!!!
try mo din s mga music store muna ung effects bgo k bumili pnapagamit nmn nila yun ehh part ng sales nila un
* next time llgay ko ung pics nung mga chains ng effects q pti ung pnaka board q
bawal text spelling dito!!
Title: Re: Post your pedalboard chain routing here!
Post by: guitbox on October 11, 2008, 01:39:28 PM
mga sir, kung meron akong chorus, tremolo and delay, suggest naman ng ideal na set up...
thanks!
Title: Re: Post your pedalboard chain routing here!
Post by: myageoldthing on October 11, 2008, 03:05:51 PM
Title: Re: Post your pedalboard chain routing here!
Post by: lenmc on November 15, 2008, 07:11:21 PM
Latest set-up. (Tigil muna sa pagbili ng mga bago para maka-ipon>) Baliktarin natin base sa pag tinitingnan natin sa floor:
AMP <- BOSS DD-3 Digital Delay <- BOSS BF-2 Flanger <- BOSS CH-1 Super Chorus <- Arion MDI-1 Tube Mania <- Ibanez DS-7 Distortion <- BOSS AC-3 Acoustic Simulator <- Ibanez Tuner <- GUITAR
Lalagyan ko pa ng BOSS CS-3 Compression Sustainer after ng Ibanez Tuner para sa magandang sustain. And BOSS NS-2 Noise Suppressor para hindi maingay yung distortion pag naka-open.
Title: Re: Post your pedalboard chain routing here!
Post by: guitbox on November 15, 2008, 11:12:18 PM
Idealy after the dirt pedal so its like this guitar -- metalzone--- eq--- noisegate--- etc.. pero its up to you..
i did that on my first setup i set the metalzone for a fat distortion then scoop the mids with a ge7 when metal songs call for it, conversely, you can use the eq post gain for enhancing feedback/booster
Title: Re: Post your pedalboard chain routing here!
Post by: angeloesteban14 on December 16, 2008, 05:19:42 PM
ok lang b yung guitar-->metalzone-->noise gate-->boston me-200
saan ko pwd isingit lagay ng equalizer mga ser?? :mrgreen:
after ng dirtpedal sir...
metalzone>eq>noisegate>me-200 :-D
Title: Re: Post your pedalboard chain routing here!
Post by: ghostalker on December 16, 2008, 05:25:20 PM
my chain routing
Guitar>behringer TU> Digitech HotHead> Digitech Bad Monkey> Boston DD100> Volume Pedal> AMP
Title: Re: Post your pedalboard chain routing here!
Post by: chupao on December 16, 2008, 05:45:25 PM
Marshall==>HM100==>SD1==>Guitar
sana me NS2 lang hee hee!!
madami ka naman magagawang settings sa dalawa eh
pero i use SD1 as a Booster okay na solb na sa sustain nakatulong kahit papano mas nagkakulay yun tugtug ko ngayon ! salamat sa tito ko sa padala niya boss sd1 :-D :-D :-D
Title: Re: Post your pedalboard chain routing here!
Post by: masterchoxter on December 16, 2008, 06:18:58 PM
ok lang b yung guitar-->metalzone-->noise gate-->boston me-200
saan ko pwd isingit lagay ng equalizer mga ser?? :mrgreen:
yep, sa dulo preferably. you're equalizing the signals from your pedals or from your guitar eh. if you equalize before the pedal, guitar mo lang ang control mo, not the whole pedals.
on the Noise Gate, i use it before all the pedals. para kung may raw hum or ground sound coming from guitar ko, malilinis before it reaches the other pedals. ung iba, they use it as booster. booster ko EQ.
un lang... 'Bow'!
Title: Re: Post your pedalboard chain routing here!
Post by: MegaLLica on December 18, 2008, 11:48:37 AM
hi guys..
my mine is: guitar==>gfx3==>HM200==>eq200==>amp
there seems to be a problem with the znr noise gate on my gfx3. nakatodo na ung gate pero im still encountering an annoying noise before or when the gate closes. it also happens before the gate kills the sustain. is it normal? any suggestions guys, havent tried switching the gfx3 and the Hm200..
thanks.. :-D
Title: Re: Post your pedalboard chain routing here!
Post by: kenki on December 18, 2008, 10:41:39 PM
check mo cables mo...baka grounded
di kaya nman yung guitar mo baka grounded din...
pag ndi sila grounded baka nga sa gadget mo na yan
hope this helps...
Title: Re: Post your pedalboard chain routing here!
Post by: MegaLLica on December 19, 2008, 10:24:08 AM
pag ndi sila grounded baka nga sa gadget mo na yan
hope this helps...
thanks sa info, but I already checked my cables and found no problems at all. i tried removing the ZNR noise gate from the GFX3 and the annoying noise was gone but the feedback was hilarious..hehe dumugo tenga ko.. lumalabas lang naman ung noise pag sa sustain or pag tumigil ako sa pagkaskas. or bago magclose ung gate, baka nga sa zoom noisegate na ung problem.
parang ganito nangyayari CHUGek CHUGek - sa kaskasan tiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii-ek - for sustain naman
help guys..hehehe
Title: Re: Post your pedalboard chain routing here!
Post by: NiardicA on December 20, 2008, 05:04:20 PM
mga guitar masters newbie here.... suggest lang po.... meron ako stomp boxes pa-PM naman po yung best sequence para sa mga ito:
BOSS Metal Zone BOSS Flanger BOSS Chorus Boston Noise Gate Behringer EQ
much appreciated mga master.......
Title: Re: Post your pedalboard chain routing here!
Post by: the_Nong on December 21, 2008, 12:33:17 AM
thanks sa info, but I already checked my cables and found no problems at all. i tried removing the ZNR noise gate from the GFX3 and the annoying noise was gone but the feedback was hilarious..hehe dumugo tenga ko.. lumalabas lang naman ung noise pag sa sustain or pag tumigil ako sa pagkaskas. or bago magclose ung gate, baka nga sa zoom noisegate na ung problem.
parang ganito nangyayari CHUGek CHUGek - sa kaskasan tiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii-ek - for sustain naman
help guys..hehehe
whoa !!
pareho tayo ng prublema tol haha
duda ko jan check mo gitara mo...pickups...pag wala na tlga...baka sa gadget mo na yan tlga...ung saken ganyan din kaingay di ko tuloy magawa ung mga bagsakan namen kasi may tunog pa rin e dapat wala na sa part na tugtugin un haha
Title: Re: Post your pedalboard chain routing here!
Post by: alvin_ching5786 on December 23, 2008, 12:20:28 PM
what difference will it make if i use Boss NS-2's loop? tnx
Title: Re: Post your pedalboard chain routing here!
Post by: akosimic on December 23, 2008, 09:00:15 PM
my current setup goes like this:
ibanez ts7-->boston od-->ibanez cf7-->
using the stereo outs:
output a-->danelectro pb&j and tuner output b-->tuner
output a goes either to an amp sim or the amp.
now has anyone invented a switching system which lets me interchange the sequence of 2 pedals (pedal a and b becomes b and a)? :-) i need one.
Title: Re: Post your pedalboard chain routing here!
Post by: alvin_ching5786 on December 24, 2008, 02:02:09 AM
here's mine
guitar>NS2>Bad Monkey>OD3>DS1>Nano Small Stone>ME50>amp
pero baka magbago since i'm not sure whether to use the Boss NS2 loop(send/return) or just stay with this setup
Title: Re: Post your pedalboard chain routing here!
Post by: RonMoreno on December 26, 2008, 11:25:02 AM
oh i get it hehe...yes it's omar (yung avatar ko), i thougth you were referring to my setup...i was just wondering malayo kasi sa setup ni omar yung akin e, his setup is super crazy! :-D
Title: Re: Post your pedalboard chain routing here!
Post by: coy_2cute on January 02, 2009, 05:11:19 PM
hello po mga bossing! I own mostly behringer effects, my first set, heheh..
Here is my setup: strat --> TO100 --> UM300 --> Boston OD-100 --> EQ700 --> DR100 --> amp
i use my boston OD-100 as p booster for my gain-based effects..
Thanks!
Title: Re: Post your pedalboard chain routing here!
Post by: barneykols on January 11, 2009, 07:13:44 PM
Guitar > G1x > Vintage Phaser > Boston Flanger > DOD FX75c Stereo Flanger > MT2 > Dr. Boogey > ZDC > Fab Echo > Noise Gate > Crybaby > Amp
:wink:
Title: Re: Post your pedalboard chain routing here!
Post by: AkelleFusion on January 12, 2009, 03:02:04 PM
updated: Guitar--->In--> Loop A (Dirt pedals, comp and wah): Send-> Boston 200 Compressor -> Wah -> Boss OD2 -> Boss Mt2 -> Noisegate - > Line 6 Dm4 (Settings: Line 6 drive, Ts-808, MXR Micro Amp for sweet cleans, Line 6 Distortion) -> Return
Loop B (Modulation pedals) Send-> Boss Ge-7 -> Boss CE-20-> Boss DD2 - > Floor Tuner - > Return--->Sansamp-->Out-->Amp :-)
Title: Re: Post your pedalboard chain routing here!
Post by: parirami on January 12, 2009, 04:23:14 PM
Need help guys --- this is my current setup and Ill need to improve it so I'll hope for your suggestions on new routing or additional pedals I can get to improve the sound:
HB-HB Guitar going to -->
Zvex Fuzz Factory -->
G1X set to clean (Compressor only or boost on memory bank)-->
Octaver (Boston OC-200)-->
RAT Dist Assymetric Mod-->
Fat Wah setting (Ibanez Weeping Demon)
Boston Flanger
Echobase Delay
Current observations and problems ----
1. Amp goes crazy and hums alot on high gain settings --- specially with Zvex on 2. Can use G1x settings and move through memory bank volumes (using it as lead boost, or as footswitch delay) 3. Wah is too pronounced (nice for some crazy songs... but putting it up front in the routing removes the fat tone... so it ends up too thin)
Any suggestions or additional pedals I can use? (I'm open to using parallel setups and adding up to 3 additional pedals) Please help help!
Thanks!
Note -- can't live without the zvex though... have to use it using clean setting (which i can distort using just the volume swell on the guitar knob)
Title: Re: Post your pedalboard chain routing here!
Post by: j3yps on January 12, 2009, 10:28:15 PM
Title: Re: Post your pedalboard chain routing here!
Post by: juan_alderete on January 13, 2009, 11:15:00 AM
(http://i95.photobucket.com/albums/l148/victor_rejected/loop.jpg) sinipag ako gumawa ng illustration, very simply setup. and the most used on all my stuff for practice
eto lang sakin, very simple,. eto ang pinaka gusto kung mga gitara at fx,. korg multi, and yes its a chaos pad, I use it only for the niose psychedelic sounds and ala mars volta. pag ginagamit ko, pinagssby ko yung korg at kp, para mawala yung tone suck, ok naman sya. at pag normal mode, multi only. note: hindi LEHLE looper yang yellow. hehehe, pinagaya ko lang yung design. yung kp mono ko lang ginagamit, but does the job for me.
Title: Re: Post your pedalboard chain routing here!
Post by: fraudulentzodiac on January 13, 2009, 11:30:00 AM
simple lang (http://farm4.static.flickr.com/3293/3138094690_f262283a46.jpg?v=0) Mahavishnu dual channel looper-> *Ch.A->BK Butler Tube Driver->DOD 250 modded to true bypass *Ch.B->Steinberger Stretch Chromatic Tuner->Biyang tonefancier Fuzz ->TC Electronic Nova Modulator->Electro Harmonix Stereo memory man
Eto yung mga nasa simula: (http://i45.photobucket.com/albums/f69/ikabodbubwit/07092008119.jpg) (http://farm4.static.flickr.com/3126/3098500149_1bc57b4820.jpg?v=0) (http://i45.photobucket.com/albums/f69/ikabodbubwit/Picture053.jpg) Ibanez AF75D-TOR with Kent Armstrong P90's Fender American Deluxe Strat V Neck w/EMG DG20 Epiphone Korina 1958 Flying V w/SD JB
Eto yung nasa dulo: (http://farm4.static.flickr.com/3081/3099021421_9988ab9996.jpg?v=0) Silverface Fender Dual Showman Reverb All tube combo
Title: Re: Post your pedalboard chain routing here!
Post by: arkeetar on January 13, 2009, 12:01:03 PM
guitar>looper A/B/C> amp
A tu2>4 knob COMPROSS> Vox 847a (stock) :evil:> EHX MetalMuff with TopBoost>
B BM>D'zound #12>ds2> MXR Script Phase90>Artec Vintage Chorus>DD3
C fatulator :lol:
Title: Re: Post your pedalboard chain routing here!
Post by: randymarsh on January 13, 2009, 12:39:57 PM
choose one or two pedals from here (http://farm4.static.flickr.com/3507/3179417161_151b9c4481.jpg)
then an amp solidstate amp kapag tinatamad, tube amp naman pag may practice ang banda, recording or gig. dati pag may gig ay sinisipag ako, i'd bring my bcb6/bcb60 pero isang pedal lang ang talagang nakakabit, most likely my keeley modded boss ds-1. na paranoid na ako simula nung tumugtog kami dati at biglang nagloko pedal board ko, di ko ma troubleshoot agad.
:-D
Title: Re: Post your pedalboard chain routing here!
Post by: bentoinks on January 13, 2009, 07:46:31 PM
hanep naman yung nasa taas. anyhoo, nagpost kaya si sir turi dito? :lol:
choose one or two pedals from here (http://farm4.static.flickr.com/3507/3179417161_151b9c4481.jpg)
then an amp solidstate amp kapag tinatamad, tube amp naman pag may practice ang banda, recording or gig. dati pag may gig ay sinisipag ako, i'd bring my bcb6/bcb60 pero isang pedal lang ang talagang nakakabit, most likely my keeley modded boss ds-1. na paranoid na ako simula nung tumugtog kami dati at biglang nagloko pedal board ko, di ko ma troubleshoot agad.
:-D
wow andami :-o haha
anung gamit nyo na power supply sa EHX Holy Grail sir? Ndi ba maingay EHX HG? hehe balak ko kasi bumili e...tnx :-D
Title: Re: Post your pedalboard chain routing here!
Post by: phoenix1shot on January 19, 2009, 06:45:23 AM
sir just a few clarification ganito kc ung setup ng rig ko... galing kc ako ng multi-effects then nagdecide akong mag analog.... sugestion will be greatly appreciated
from MG15 to> boston DD100> bad monkey> hot head> tu100> to Fernando LP
powered by Sir Lemon's PSU, my board is a File case bought from SM dept. store
Title: Re: Post your pedalboard chain routing here!
Post by: Arpee Ong on January 24, 2009, 03:43:52 AM
Before: (good old days when i was more active and younger) Peavey TerminatorPredator / Epiphone EM -> Boss MetalZone -> Boss Flanger -> DOD Distortion/Delay -> Yamaha Phase Shifter -> Marshall MG
Just a year ago: Freedom LP / Batman SG -> CH-100 -> DS-100 -> Rakkarak (Software Emulation via Jack Daemon) -> Generic Amp
:) been always a minimalist, pabawas ng pabawas habang tumatanda, always looking for ways to minimize the hardware but always aiming for the good tone..planning to upgrade from fat strat to superstrat and i think i'll be fine.. yang si sikheadzraf perfectionist yan e.. hehehe..
Title: Re: Post your pedalboard chain routing here!
Post by: blessed_ph on January 25, 2009, 10:40:23 AM
Korg Tuner to Tonebone Classic to MXR/CAE Boost to TC Electronic Chorus/flanger to Boss Delay/Reverb.
Although I'm thinking of getting another delay (with tap tempo)
Title: Re: Post your pedalboard chain routing here!
Post by: DesertFox on January 25, 2009, 12:19:29 PM
Guitar---->TS808---->Tube Amp
Title: Re: Post your pedalboard chain routing here!
Post by: wh1t33rick on January 25, 2009, 12:26:58 PM
Gusto ko nga sana bawasan, but practically every pedal provides a 'service' I need. I'm currently disposing of the Morley vol pedal, pero kahit yun nagdadalawang-isip ako.
Tip: The PitchBlack isn't true bypass in the most honest sense of the word. While it does let signal through without power, it still has an internal buffer running when bypassed with power in the chain. It was wreaking havoc on my Blackstar, sobrang lakas ng hiss, so I put the Korg near the end of the chain and sent the Blackstar back to Brian Marshall for a PCB upgrade to current specs which he claims will lessen the noise (props to Subdecay Studios!).
I'll probably make some sort of in/out box with a tuner out in the future so both guitar and amp cables go in one place while the tuner is isolated from the chain.
Title: Re: Post your pedalboard chain routing here!
Post by: deadlifted on January 29, 2009, 03:28:26 AM
my current setup:
guitar - Korg DT10 - Dunlop Hendrix wah - <either Boss DS-1 or SD-1> - <either EHX English Muff'n or Damage Control Demonizer> - amp
if im playing the tele, DS1 ang ginagamit ko as booster. if im using humbucker guitars, ill use the SD-1.
yung English Muff at Demonizer, depende sa mood ko gamitin pag gigs. though the past few weeks laging EHX yung gamit ko, pinagpapahinga ko yung Demonizer. :-)
Title: Re: Post your pedalboard chain routing here!
Post by: Sugar Ray Vaughan on January 29, 2009, 02:39:37 PM
These are my gear, I still don't have PEDAL BOEAD......................... Everytime I finished setting up my gear the band is already packing their stuff and ready to get home.... :x http://i186.photobucket.com/albums/x139/rogeryu_ph/MyGear-1.jpg[/img]](http://i186.photobucket.com/albums/x139/rogeryu_ph/MyGear-1.jpg) (http://[img width=600 height=450)
That's why I tossed it all into the BIN and just bought a GT10 for good :lol:
Title: Re: Post your pedalboard chain routing here!
Post by: davinsh on February 11, 2009, 10:13:31 AM
Hi, mga sir.. Im just starting to collect effects.. what can you suggest, Im will be playing alternative, cguro some of the hardcore.. pero i wanna sound like slash or vai.. Ill be using Gregg Benett AV3/ Ibanez RGT6EXFX .. tnx mga sir... :lol:
Title: Re: Post your pedalboard chain routing here!
Post by: nibram on February 11, 2009, 02:47:17 PM
eq700-->hellbabe-->scream&shout--> (metal muff w/ top boost or mz-2 or mt-2)-->bf-2-->phase90
pagdating ng dd7 at korg pitchblack, diretso sa dulo... :lol:
Title: Re: Post your pedalboard chain routing here!
Post by: free2rock on February 23, 2009, 01:14:59 AM
Eto sakin.
Guitar >> Boss OS-2 >> Boston HM-100 >> Jetter Gear Gain Stage Blue >> Line 6 Space Chorus >> Boss DD-3
Pwede na ba? :-)
Title: Re: Post your pedalboard chain routing here!
Post by: juan_alderete on February 23, 2009, 02:09:53 AM
OT: question lang,, okay lang ba tabihan ng wahwah ang multi-effects?.. bitin kasi ako sa wah ng korg, pero it works naman,i just want more range.. whats the pros and cons?.. anyone tried it?..
Title: Re: Post your pedalboard chain routing here!
Post by: angeloesteban14 on February 23, 2009, 05:24:31 AM
Ah tama na pala yung ginawa ko haha pero thanks din sir!
Title: Re: Post your pedalboard chain routing here!
Post by: NiardicA on February 24, 2009, 07:09:21 PM
is my board set up correct??
Amp--> Boston EQ -->Boston Noise Gate --> Boss Flanger -->Danelectro Fab Chorus --> Zoom606 --> Boss Metal Zone ---> (and soon to be added TS7) ------>Guitar??
Title: Re: Post your pedalboard chain routing here!
Post by: angeloesteban14 on February 24, 2009, 07:14:27 PM
Amp--> Boston EQ -->Boston Noise Gate --> Boss Flanger -->Danelectro Fab Chorus --> Zoom606 --> Boss Metal Zone ---> (and soon to be added TS7) ------>Guitar??
pag ba nasa huli ang multi effects mas prone sa tone sucking?
may gfx4 kasi ako..
eto plano ko na setup..
guitar>dist>equa>noisegate>gfx>amp
thanks sa mag comment..
i suggest you try this setup:
guitar > noisegate > dist >eq > gfx > amp
Title: Re: Post your pedalboard chain routing here!
Post by: esteban4377 on February 24, 2009, 08:02:41 PM
MGA BOSSING NEWBIE HERE NEED SOME HELP, IM ABOUT TO KNOW KUNG ANO PO UNG DAPAT KO NA ISAMA KASI MAY DIGITECH AKO NA RP 90 AT OD BOSTON 100,GUSTO KO PA DAGDAGAN PEDAL WHAT PO MASASUGEST NYO PO...SALAMAT
Title: Re: Post your pedalboard chain routing here!
Post by: turiguiliano on February 24, 2009, 08:08:38 PM
MGA BOSSING NEWBIE HERE NEED SOME HELP, IM ABOUT TO KNOW KUNG ANO PO UNG DAPAT KO NA ISAMA KASI MAY DIGITECH AKO NA RP 90 AT OD BOSTON 100,GUSTO KO PA DAGDAGAN PEDAL WHAT PO MASASUGEST NYO PO...SALAMAT
it all depends on what music you're playing and what sounds do you want to achieve.
Title: Re: Post your pedalboard chain routing here!
Post by: kune_km on February 25, 2009, 09:32:25 AM
Title: Re: Post your pedalboard chain routing here!
Post by: bukokurs on March 26, 2009, 08:25:13 PM
mga sir! magtatanong lng sna poh ako ng mgandang chain un mga pedals ko po boston eq boston noise gate boston hm-100 boston ds1 cry baby slash pedal zoom g2.1u
ano pa po ba kulang??? tnx po
Title: Re: Post your pedalboard chain routing here!
Post by: angeloesteban14 on March 27, 2009, 06:14:08 AM
Bro, d ba dapat ung Boss NF-1 is after ng dirt stomps mo??
partly right for me bro.
depende sa purpose eh. if I may to use it as noise gate for hums and feedback coming from my guitar, i use it on the first few pedals prior to my dirts. whereas, if i need to reduce the noise coming from my dirt pedals, i put my noise gate after all my dirt pedals.
depende yun sa mood and taste ng user. i might put it after my dirt pedals within this week. kinapos lang din ako ng patch plugs. pagpatch cables kasi masyadong masikip na sa board ko eh. but this setup works for me naman for now.
thanks for your concern bro.
Title: Re: Post your pedalboard chain routing here!
Post by: ejecruz on June 09, 2009, 12:55:07 PM
depende sa purpose eh. if I may to use it as noise gate for hums and feedback coming from my guitar, i use it on the first few pedals prior to my dirts. whereas, if i need to reduce the noise coming from my dirt pedals, i put my noise gate after all my dirt pedals.
depende yun sa mood and taste ng user. i might put it after my dirt pedals within this week. kinapos lang din ako ng patch plugs. pagpatch cables kasi masyadong masikip na sa board ko eh. but this setup works for me naman for now.
thanks for your concern bro.
Ah ok, gotta try that setting too, Thanks sa bagong info bro.. God Bless...
Title: Re: Post your pedalboard chain routing here!
Post by: kune_km on June 09, 2009, 01:31:34 PM
Ah ok, gotta try that setting too, Thanks sa bagong info bro.. God Bless...
no problem bro.
chain routing is always a trial & error procedure depending on the usage and taste of the user. some setup may works fine for others but not for some. just keep on experimenting...
GOD BLESS YOU TOO...
:lol:
Title: Re: Post your pedalboard chain routing here!
Post by: papotzki85 on June 09, 2009, 03:24:19 PM
AMPLIFIER to Boss TU-2 to TR-2 to PS-2 to NS-2 (under NS-2 send to Behringer GDi to Boss HF-2, PH-2, DC-3 return to NS-2) NS-2 to Boss TU-12 to Fender Strat Plus Deluxe :wink:
rarely, because the gain on this amp, as i said if i played messhugah perfect! lol but i dont, its really tight saijo, its a thick brick wall of chug, if i do use it.. i have the gain near clean but a bit gritty
Title: Re: Post your pedalboard chain routing here!
Post by: Jejan on June 10, 2009, 03:37:33 AM
sir, hows the rp50 with the other dirt? modulations lang ba gamit mo sa rp?
im planning to buy eq din kasi; i have rp90. :-D
Hmm. So here's my patch set-up for the RP50:
1 - OD 2 - OD+Wah (I have an expression pedal) 3 - Whammy 4 - Phaser + Delay 5 - Chorus 6 - Crazy Phaser (Set to the fastest rate) 7 - MT-2 type distortion 8 - Tremolo (Set to the fastest rate) 9 - (Nothing Special) 10 - Phaser + Delay + Reverb (For clean tone)
But my clean tone is usually the preset 1. But for a really clean sound, I put it to bypass mode. I do not use these effects regularly when jamming or in gigs. I just use them to some parts of the song.
Title: Re: Post your pedalboard chain routing here!
Post by: kune_km on June 10, 2009, 09:15:23 AM
rarely, because the gain on this amp, as i said if i played messhugah perfect! lol but i dont, its really tight saijo, its a thick brick wall of chug, if i do use it.. i have the gain near clean but a bit gritty
hmmm,interesting...
Title: Re: Post your pedalboard chain routing here!
Post by: manilacoke3 on June 10, 2009, 11:53:29 PM
I currently have this setup:
Comp > Wah > Drive > Tremolo > Delay
and I want to an autowah just as a modulator. Di ko naman pagsasabayin yung dalawang wah unless mag trip ako. haha. Saan ba best spot?
Title: Re: Post your pedalboard chain routing here!
Post by: william251082 on June 11, 2009, 02:19:05 AM
Try a standard GCB-95 or a Vox 847. Hmmm.... subukan mo din tanggalin yung FX-100. Wala pa kong nasusubukang buffer ng Behringer na nagustuhan ko e.
inalis ko na yung hellbabe. ok naman yung fx100, delay lang naman silbi nun.. pero yung wah talaga panira, ampanget! sobra! nakukulob yung tunog, humihina pa..
Title: Re: Post your pedalboard chain routing here!
Post by: wannabeguitarist on June 25, 2009, 11:27:00 PM
Guitar > DOD Grunge > Yamaha DG-Stomp (for amp modeler, flanger, phaser and reverb) > Turbo Rat > CH1 > DD100 > Mixer/Amp
Title: Re: Post your pedalboard chain routing here!
Post by: jfidelity on June 26, 2009, 02:36:55 PM
Medyo OT:
I just traded a my korg ax3000g for a tonebone hot british + cash. What I have now is just the tonebone and an ibanez ts7 and a dod fx20 equalizer. Ano kaya magandang gawin na order para sa signal chain ng tatlo? As of now nagiisip pa ko ng magandang analog modulation and delay effects..
Ngayon naghahanap naman ako ng compact na multi effect new or old model.. para gawin yung mod + delay for the mean time.. Can you suggest me some? Yung wala if not minimal tone suck.. Thanks. Temporary solution.
Title: Re: Post your pedalboard chain routing here!
Post by: papotzki85 on June 26, 2009, 09:16:07 PM
kung hindi ka masyadong pihikan sa footprint pwede na nga, kasi mas malaki hardwires sa mga x series hehe :lol:
yun nga po magpapalit na ko ng board bye bye bcb6 muna kasi trip ko na magbotique pedals hahahaha bk butler at blackstar for my drives and mga true bypass na reverb and tuners tsaka NOSE gate para di makahinga (http://smileyicons.net/s/132.gif)
Title: Re: Post your pedalboard chain routing here!
Post by: charles55 on September 09, 2009, 12:13:13 PM
guitar-wah-od-distortion-amp :-D
Title: Re: Post your pedalboard chain routing here!
Post by: maxi_musikero on September 10, 2009, 10:02:44 AM
since i already have a final list of pedals that will be included in my board (and about a month to complete them), maybe i can already get inputs on proper routing (sorry kung excited! :lol:).
2 ODs, wah, compressor, chorus, delay, reverb and tuner.
appreciate your inputs guys! :-)
Title: Re: Post your pedalboard chain routing here!
Post by: arkeetar on September 10, 2009, 10:03:40 AM
since i already have a final list of pedals that will be included in my board (and about a month to complete them), maybe i can already get inputs on proper routing (sorry kung excited! :lol:).
2 ODs, wah, compressor, chorus, delay, reverb and tuner.
appreciate your inputs guys! :-)
another delay :-D
Title: Re: Post your pedalboard chain routing here!
Post by: maxi_musikero on September 10, 2009, 10:10:27 AM
i was planning to add a multi effects to the chain for added modulation and delay(maybe a gfx model or a boss ME series type) san kaya magandang ilagay?salamat!
soon ill change my guyatone phaser to a mxr phase 100 or 90 OR a boss PH-2..
Title: Re: Post your pedalboard chain routing here!
Post by: maxi_musikero on September 14, 2009, 11:28:02 AM
i was advised to place the wah pedal before compressor. this would improve the wah sweep since it will be directly connected to the guitar and it can directly affect the guitar tone.
any inputs on this? :-)
Title: Re: Post your pedalboard chain routing here!
Post by: arkeetar on September 14, 2009, 11:47:23 AM
i was advised to place the wah pedal before compressor. this would improve the wah sweep since it will be directly connected to the guitar and it can directly affect the guitar tone.
any inputs on this? :-)
ako kahit before or after ok lang, hindi ko masyadong maramdaman difference, ngayon, comp>wah... :lol:
Title: Re: Post your pedalboard chain routing here!
Post by: dantuts on September 14, 2009, 11:49:23 AM
i was advised to place the wah pedal before compressor. this would improve the wah sweep since it will be directly connected to the guitar and it can directly affect the guitar tone.
any inputs on this? :-)
ganun yung madalas na suggestion.. try mo tapos check mo kung ok sayo tunog
Title: Re: Post your pedalboard chain routing here!
Post by: guitbox on September 14, 2009, 11:58:00 AM
Title: Re: Post your pedalboard chain routing here!
Post by: raphy137 on October 26, 2009, 06:34:15 PM
Mga Boss Pano ko ba iseset ang aking Mga pedals sa aking Pedal Board ?
Meron po akong Boston HM100 , Boss CH-1 , WAH and Volume Pedal , EQ , And An MXR Wylde Overdrive . 2g2gan ko po eh , Heavy Metal , like lamb of GOd , Slipknot , And Sometimes alternative Rock . So please help me . Thanks ! :-) :-D
Title: Re: Post your pedalboard chain routing here!
Post by: ogagka0606 on October 26, 2009, 06:52:07 PM
ano ba dapat ang pagkakaayos ng pedals?
yung usual lang. kunware, guitar, dist,od,. then?
Title: Re: Post your pedalboard chain routing here!
Post by: wannabeguitarist on October 26, 2009, 07:27:51 PM
Quote
Mga Boss Pano ko ba iseset ang aking Mga pedals sa aking Pedal Board ?
try mo to bro.
guitar>wah>eq>hm100>OD>CH1>amp
or
guitar>Wah>HM100>OD>EQ(booster)>CH1>amp
new set-up ko
Guitar>Marshall JackHammer>ME50>MXR EQ>Amp
Title: Re: Post your pedalboard chain routing here!
Post by: aya13allen on October 26, 2009, 08:11:58 PM
here's mine
TC Nova Delay --- EHX Small Clone --- Fulltone OCD (dati) --- Xotic BB plus --- MI Audio Tubezone --- Korg Pitchblack --- Budwah (soon to be LOL)
Title: Re: Post your pedalboard chain routing here!
Post by: ian1227 on October 27, 2009, 11:19:47 AM
Title: Re: Post your pedalboard chain routing here!
Post by: weareathome on November 01, 2009, 09:35:57 AM
Guitar -> Satchurator -> bad monkey -> multi effects -> MM4 -> DL4 -> RC-20xl The rc-20's mono and the multieffects up to the mm4 is stereo. I was wondering how i could end the loop with stereo so i could utilize my stereo delays, etc. If i plugged it before the multi effects, the signal of the loop would have effects to and that's just weird.
Title: Re: Post your pedalboard chain routing here!
Post by: kiiimpoiii on November 02, 2009, 01:44:13 AM
it makes a good sound and more analogish lalo na pag may loop pa ung amp... ska more powerful ung dala ng gt5 pag hook up sa loop ung reverb at delays mo....
ung wah ung booster at keeley comp together with my 2 dirts no need for loops sa loob ng gt5 mag sesend lng sila ng panget na signal ehh... kea un ung purpose ng looper pa ulit sa labas....
Title: Re: Post your pedalboard chain routing here!
Post by: raphy137 on November 02, 2009, 07:54:16 AM
WOOH ! LAPIT NA PASKO ! 1/2 na BUWAN NALANG !!!!!!!!!! MAY PANG GAS NANAMAN !!! WOOHOOO !!
Title: Re: Post your pedalboard chain routing here!
Post by: guitbox on November 02, 2009, 09:29:07 AM
latest route:
gtr > tuner > wah > OD > OD > OD > chorus > delay
Strat > Kordg Pitchblack > GCB-95 > G2D Custom OD > Xotic BB+ > OCD v.3 > EHX Small Clone > TCE Nova Delay
this should last me for a long time---i hope. :-D :-D :-D
Title: Re: Post your pedalboard chain routing here!
Post by: janjan0416 on November 05, 2009, 01:10:00 PM
Eto akin.... guitar >G2.1u (for modulations) > DS-1 BritMode(Markv) > SD-1 (for boost) > amp ng ng-ggtara sa ilalim ng foot bridge.. hehehe... Game na kya to? :-D :?
Title: Re: Post your pedalboard chain routing here!
Post by: zyehj on November 05, 2009, 02:19:02 PM
tanong lang mga bro
DS1 >> AX1500g >> DDelay >> EQ
or
DS1 >> AX1500g >> EQ >> DDelay
Thanks
Title: Re: Post your pedalboard chain routing here!
Post by: voidmain on November 05, 2009, 07:08:35 PM
Here's my problem parang mahina yung tunog nung ax1500 sa chain kahit nakatodo na yung level tsaka master volume nya.I use the ax for some modulations and reverbs naka off drive and cab sim nya.Mas malakas pa yung dirt ko kaysa sa modulation na nakukuha ko sa ax1500g.Do i have to put my multifx in front of the chain or last or just keep it in place and change the positions of the other pedals?Para maging equal yung tunog ng ax sa mga ibang pedals sa chain.Nga pla, my amp doesnt have any fx loops on it.So yun hehe
Salamat sa advice in mga sirs! :-D
Title: Re: Post your pedalboard chain routing here!
Post by: kurtcobainer on November 22, 2009, 01:41:29 AM
Title: Re: Post your pedalboard chain routing here!
Post by: soundgardener75 on November 23, 2009, 09:35:19 AM
NS-2>G System>{Loop 1 - BD-2, Loop 2 - BRJ Big Red Fuzz, Loop 3 and 4 - undecided pa}>Left out - Ampeg VL-501> Right out - Peavey VTM 60.
Pag di ko kailangan ang effects, pwede kong i-bypass ang G System, so yung NS-2 talagang pang-eliminate lang ng noise ng gitara na gagamitin ko.
Title: Re: Post your pedalboard chain routing here!
Post by: daturd on November 25, 2009, 12:14:18 PM
mga sir. magpapatulong lang sana ako sa pag arrange ng pagkasunod sunod ng pedals ko.wala kasi ako idea kung pano gawin ito. ano po kaya magandang power supply para mapagana mga eto? magpapabili sana ako sa kapatid ko ng voodoo lab sa US pero 110 daw dun. ok lang po ba ipa convert sa 220 dito sa pinas? salamat.. 1.boss ds1 keeley 2.boss mt2 keeley 3.fulltone OCD 4.Vox satchurator 5.line6 DL4 6.boss dd3 7.boss chromatic tuner 8.boss rv5 9.boss bf3 10.mxr 10 band EQ 11.boss Noise supressor 12.Mxr phase 90 13.boss CE5 14.crybaby wah classic gcb95f
Title: Re: Post your pedalboard chain routing here!
Post by: kristupito on November 29, 2009, 10:31:56 PM
eto sakin:
guitar > wah > looper (diy) > volume pedal > analog delay > amp Line A: compressor > chorus Line B: Mt2 > OD > EQ
planning to have a noise gate... san ba tapat isingit?
Title: Re: Post your pedalboard chain routing here!
Post by: kokokcrunch on December 03, 2009, 09:16:10 PM
:-D my routing is kind of weird but here goes :
Guitar > EHX Small Clone Chorus > Boston HM-100 > MXR Distortion + > Behringer DD100 > Boston EQ 100 > Zoom G1X > AMP
up to now di ko pa nafigure out bakit ganyan ko sila inarrange hehehe :-D
Title: Re: Post your pedalboard chain routing here!
Post by: lykenhowl on December 04, 2009, 02:58:10 AM
Title: Re: Post your pedalboard chain routing here!
Post by: ernestjulian on December 22, 2009, 11:04:59 PM
Goodpm mga sir, di naman siguro masamang magtanong.. Bago pa lang kasi ako sa analog setup, so what is the best na mairerecommend nyo sa pagkakasunod-sunod ng mga pedals ko.. eto po ang mga pedals ko: jh1 wah, tu2, shredhead, sd1, mxr phase90, bf3, ds1(brit), ce5, ns2 ano po dapat ang pagkakasunod-sunod nito at papano ang connection ng mga patch cables ko.. I guess di naman masama magtanong.. Thanks po in advance sa mga sasagot.. Merry Christmas to all!! :lol:
Title: Re: Post your pedalboard chain routing here!
Post by: r_chino18 on December 22, 2009, 11:13:25 PM
Goodpm mga sir, di naman siguro masamang magtanong.. Bago pa lang kasi ako sa analog setup, so what is the best na mairerecommend nyo sa pagkakasunod-sunod ng mga pedals ko.. eto po ang mga pedals ko: jh1 wah, tu2, shredhead, sd1, mxr phase90, bf3, ds1(brit), ce5, ns2 ano po dapat ang pagkakasunod-sunod nito at papano ang connection ng mga patch cables ko.. I guess di naman masama magtanong.. Thanks po in advance sa mga sasagot.. Merry Christmas to all!! :lol:
try it before the DS2. try mo rin yung Phaser before the DS2 para hindi masyadong swooshy yung tunog ng phaser. :wink:
cge thanks!! :mrgreen:
Title: Re: Post your pedalboard chain routing here!
Post by: morphine on January 05, 2010, 10:40:36 AM
eto sakin dpa kompleto e
guitar>(crybaby)>Lu20>ts9>dod preamp 250>ds1>(small clone)>dd3>(holy grail)>amp yung naka close parent....yung ang mga missing in action pa.... tamaby tambay muna sa classifieds.. :-D comments naman sa set up thanks
Title: Re: Post your pedalboard chain routing here!
Post by: lycan.neo on January 05, 2010, 10:46:15 AM
Epiphone Les Paul Standard > Bad Horsie 2 > Metal Muff > DS-1 Keeley Moded > Boss PH-2 > TR-2 Tremolo > Digitech Whammy 4 > Boss DD-20 Giga Delay> Boston Flanger > AMP
Title: Re: Post your pedalboard chain routing here!
Post by: soundgardener75 on January 05, 2010, 11:13:21 AM
I need a wah and a reverb pedal...i want a chorus or flanger pedal...never liked delays, though it's fun to play with them. :-)
Suggest ko sa iyo yung Ibanez Tone-Lok CF-7 Chorus/Flanger. Parehong usable chorus at flanger features, may Normal at Whacked mode, at since set-and-forget siya (thanks to the push-up knobs), hindi ka na mamo-mroblema sa settings. :-D
Title: Re: Post your pedalboard chain routing here!
Post by: red_hot on January 05, 2010, 11:21:59 AM
[size=15pt]
Vox wah 847 ->Ibanez Ts9 -> MXR doubleshot Distortion -> Boss GE7 -> Korg Dt10 -> Boss Bf2 -> Boss DD7 to amp simple but earthshaking new year set-up [/size]
Title: Re: Post your pedalboard chain routing here!
Post by: dayuhanspace on January 06, 2010, 01:26:06 AM
eto sa akin: -Digitech synth wah>Dan electro coolcat fuzz>Sansamp GT2>Zoom 506 multi>Amp.
i only use the modulation ng zoom 506II at pitch shifter,pero pansin ko mas malakas yun ugong na digital pag naka on yun GT2. Minsan sinasabay ko yun Fuzz at GT2 para mas matapang yun drive.
Title: Re: Post your pedalboard chain routing here!
Post by: krunch on January 06, 2010, 08:45:40 AM
it's up to you kung san mo ilagay. i prefer the phaser before the drives. it makes the phase tones subtle. after the drives, it sounds squishy. :lol:
when you say that it makes the phase tones subtle, do you mean it in a Brian May kind of way?
Title: Re: Post your pedalboard chain routing here!
Post by: vin12 on January 06, 2010, 10:26:51 AM
crybaby>korg dt10>digitech bm>boss ds1>boston eq> boss bf2>phaser trem in one box>boss dd3>boss ch1
Title: Re: Post your pedalboard chain routing here!
Post by: blackwingchai on January 06, 2010, 10:38:36 AM
eto ang simple,
guitar>Crybaby gcb95>Fbm-1>Bd2>amp
tuner pedal nalang kulang
Title: Re: Post your pedalboard chain routing here!
Post by: Deewende1 on January 06, 2010, 01:52:27 PM
share ko po akin mga bossing..
baka may masagap akong ideas or better set-up pa..
tugtugan po namin is Dub reggae, roots reggae / blues and project to cover The Dub Trio.. baka may idea po kyo bout the set up ng pedals mga bossing.
ito po set-up ko: Peavey Generation EXP guitar ----> Base Echo Delay -----> B3 analog delay -----> OCD -----> Dgitech Hyper Phaser stereo ------> Boss EQ7 -----> Boss Noise Gate -----> ELK Amp
pwede pong makahingi ng idea kung tama po ba ang set-up, lalo na po sa Equalizer and Noise gate? and im planing na bumili pa ng compressor / sustainer cs3 ba yun! ok lng po ba mga Bossing kung dadagdagan ko pa ng cs3 kahit na may noise gate ako? tnx... hope you can give me ideas mga boss.. :mrgreen:tnx...
Title: Re: Post your pedalboard chain routing here!
Post by: AnodBiomech on January 06, 2010, 03:55:36 PM
baka may masagap akong ideas or better set-up pa..
tugtugan po namin is Dub reggae, roots reggae / blues and project to cover The Dub Trio.. baka may idea po kyo bout the set up ng pedals mga bossing.
ito po set-up ko: Peavey Generation EXP guitar ----> Base Echo Delay -----> B3 analog delay -----> OCD -----> Dgitech Hyper Phaser stereo ------> Boss EQ7 -----> Boss Noise Gate -----> ELK Amp
pwede pong makahingi ng idea kung tama po ba ang set-up, lalo na po sa Equalizer and Noise gate? and im planing na bumili pa ng compressor / sustainer cs3 ba yun! ok lng po ba mga Bossing kung dadagdagan ko pa ng cs3 kahit na may noise gate ako? tnx... hope you can give me ideas mga boss.. :mrgreen:tnx...
Try mong unahin yung noise gate. Tsaka anong use mo sa EQ? Tone shaping or boost? Kung boost, mas gusto ko po siya sa dulo, kung tone shaping, try mo siya before the OCD.
Title: Re: Post your pedalboard chain routing here!
Post by: monsterkicker on January 07, 2010, 08:18:57 AM
pwede na ganito set up mga sir?
os2-ax10g-dd3 :-D dame pa kulang
Title: Re: Post your pedalboard chain routing here!
Post by: r_chino18 on January 07, 2010, 08:21:28 AM
baka may masagap akong ideas or better set-up pa..
tugtugan po namin is Dub reggae, roots reggae / blues and project to cover The Dub Trio.. baka may idea po kyo bout the set up ng pedals mga bossing.
ito po set-up ko: Peavey Generation EXP guitar ----> Base Echo Delay -----> B3 analog delay -----> OCD -----> Dgitech Hyper Phaser stereo ------> Boss EQ7 -----> Boss Noise Gate -----> ELK Amp
pwede pong makahingi ng idea kung tama po ba ang set-up, lalo na po sa Equalizer and Noise gate? and im planing na bumili pa ng compressor / sustainer cs3 ba yun! ok lng po ba mga Bossing kung dadagdagan ko pa ng cs3 kahit na may noise gate ako? tnx... hope you can give me ideas mga boss.. :mrgreen:tnx...
try mo din bro na after ng OCD yung dalawang delay.. tapos before ng OCD yung phaser.. :-)
Title: Re: Post your pedalboard chain routing here!
Post by: tianx on January 07, 2010, 08:31:28 PM
Hi guys! Here's mine:
Small Pedal Board: guitar amp << Brian Wampler AnalogEcho << Exotic Effects RC Booster << Korg Pitchblack << Barber Electronics Direct Drive with MOD PCB << guitar
Big Pedal Board: guitar amp << Loop-Master Triple TBP Looper (loop 1= Retro-Sonic Phaser, loop 2= Boss TU-2, loop 3= Retro-Sonic Analog Delay) << B.Y.O.C. Tremolo V2 << MI Audio Boost 'N' Buff V1 << Barber Electronics Small Fry Burn Unit << Barber Electronics Silver LTD << guitar
Title: Re: Post your pedalboard chain routing here!
Post by: shodawmoon on January 23, 2010, 10:58:30 PM
Title: Re: Post your pedalboard chain routing here!
Post by: sonikyut on January 24, 2010, 08:44:23 AM
Heres mine
Guitar>>>BOSS [OC2>>>(INPUT)]BOSS NS2>>>BOSS MT2>>>BOSS GE7>>>GUYATONE PHASER>>>BOSS ME-50[(RETURN) BOSS NS2]>>>BOSS NS2 (OUTPUT)>>>BOSS CE2>>>BOSS DD3>>>AMP ...tama ba yang setup na ganyan? kung hinde tulong naman sa mga expert sa chaining dyan o :-D :-D :-D
Title: Re: Post your pedalboard chain routing here!
Post by: icen on January 24, 2010, 08:18:46 PM
Here's mine :
Guitar -> noise gate -> heavy metal -> delay -> boss me-30 -> overdrive -> amp
Title: Re: Post your pedalboard chain routing here!
Post by: jaoko on January 25, 2010, 01:00:03 AM
Ibanez Weeping Demon Wah >> Cacophony's Crunch Box Clone >> Zoom GFX-1 >> Hardcore Misery's MT-2 Tri-Gain >> Mark V's Shredhead >> MXR 6-band EQ >> Dimetronics Echo Base Custom Analog Delay >> Boss RC-2 Loop Station
Harmonist nalang ok na ako :-D
Lies.. hehe :-D
^^^ Luma na to.. Currently I'm running:
My Ibby RGR321EX w/ Rockfield Pups into >> Ibanez Weeping Demon Wah >>Mark V's Shredhead >> Zoom GFX-1 >> Hardcore Misery's MT-2 Tri-Gain >> Sub Zero A.D.D. >> Boss PS-5 >> Echo Phase Custom Delay >> Boss RC-2 Loop Station >> into a Peavey Combo
Title: Re: Post your pedalboard chain routing here!
Post by: kurtcobainer on May 13, 2010, 01:31:01 AM
Title: Re: Post your pedalboard chain routing here!
Post by: voidmain on May 20, 2010, 08:45:14 AM
Latest routing: Korg Pitchblack > Kalikot Audio Hikari > Teese RMC-4 > Paul C Tim > Blackout Effectors Musket Fuzz > Fulltone OCD > MXR EVH Phase 90 > TC Electronics Nova Delay
Smart Gate gone, replaced by Area T's on my tele. Pickle Vibe gone, mukhang pitch-modulation and hinahanap ng tenga ko as opposed sa tunog ng totoong vibe.
So now current pedal GAS: EHX Small Clone (or an Analogman Mini Chorus if ever I get some cash), EHX Micro POG
Title: Re: Post your pedalboard chain routing here!
Post by: turiguiliano on May 21, 2010, 01:00:03 AM
Title: Re: Post your pedalboard chain routing here!
Post by: vin12 on May 21, 2010, 09:08:26 PM
Korg dt10-vox wah-4 channel looper-amp
loop1- badmonkey loop2- shredhead loop3- boss dd3 loop4- boss bf2
Title: Re: Post your pedalboard chain routing here!
Post by: DrDeathRNMD98 on May 26, 2010, 03:57:12 AM
Artec EQ>>Artec Crazy Metal>>EHX Big Muff>>EHX Small Clone chorus
Thanks to the EQ, I can boost the Artec metal as well as the Big Muff, love doing blues with the Muff, currently on a hunt for a cheap EHX #1 Echo.
Title: Re: Post your pedalboard chain routing here!
Post by: cayle on May 26, 2010, 07:28:21 AM
Got a new pedal yesterday. It's a Lovepedal Eternity clone. I'm more than satisfied with it....smooth...thick....gainy overdrive....Don't know how an actual Eternity sounds like, but this clone seems to have ended my drive GAS for now.
Title: Re: Post your pedalboard chain routing here!
Post by: arkeetar on May 26, 2010, 08:40:32 AM
ayos!!! :lol:
Title: Re: Post your pedalboard chain routing here!
Post by: jgaluno on June 03, 2010, 11:40:14 AM
nice thread. i'm a processor user and I plan to switch to analog. Mahal kas eh dahan dahan sa pageevolve. Share ko lang in my zoom gfx8 the chain is DRIVE-MODULATION-DELAY in general groups of course. It you what drive modulation and reverb to use. COngrats author
Title: Re: Post your pedalboard chain routing here!
Post by: wannabeguitarist on June 03, 2010, 03:18:42 PM
Title: Re: Post your pedalboard chain routing here!
Post by: william251082 on June 06, 2010, 10:55:38 PM
Latest :-D I love the Kalamazoo so much that it's now the only OD on my pedalboard! looper 1 rmc5wah-->lovepedal vibe-->rcbooster-->lovepedal Kalamazoo looper 2 Micro POG-->ibanez cs9
Title: Re: Post your pedalboard chain routing here!
Post by: daryl090804 on June 07, 2010, 12:49:47 AM
Guitar -> Dunlop Crybaby From Hell DB-01 -> Boss MT2 Overkill Mod -> Boss CE5 -> Amp
Title: Re: Post your pedalboard chain routing here!
Post by: jgaluno on June 07, 2010, 08:02:19 AM
Can i post a question here? What;s the difference between analog and digital delay? I usually see these two delays in pedal boards. And, is there a delay modeler that has both delays, what brand name po at model name? thanks
Title: Re: Post your pedalboard chain routing here!
Post by: spetsnaz1123 on June 09, 2010, 10:44:51 PM
Sa ngayon zoom G2.1u lang gamit ko pero dahil nagpabili na ako ng sansamp GT2 (inaantay ko pa rin dumating), magiging ganito na set-up ko ------- Guitar>>>GT2>>>G2.1u>>>amp. Ngayon ang tanong ko, OK lang ba mga sir kung gamitin ko yung compressor at noise suppressor ng G2.1u :|?
Dahil naman sa pagbasa-basa sa thread na ito, parang ganito naman gusto kong mangyari----- Guitar>>>crybaby wah>>>bad monkey(boost)>>>GT2>>>G2.1u(mod)>>>BBE sonicstomp>>>amp :-). Mga sir OK bang pangboost ang bad monkey sa GT2?
Title: Re: Post your pedalboard chain routing here!
Post by: voidmain on June 10, 2010, 07:26:39 AM
New board, new routing: Teese RMC-4 > Korg Pitchblack > Paul C Tim > Blackout Effectors Musket Fuzz > Fulltone OCD > Kalikot Audio Hikari > MXR EVH Phase 90 > Arion SCH-1 > TC Electronics Nova Delay
Title: Re: Post your pedalboard chain routing here!
Post by: voidmain on June 10, 2010, 07:34:33 AM
Sa ngayon zoom G2.1u lang gamit ko pero dahil nagpabili na ako ng sansamp GT2 (inaantay ko pa rin dumating), magiging ganito na set-up ko ------- Guitar>>>GT2>>>G2.1u>>>amp. Ngayon ang tanong ko, OK lang ba mga sir kung gamitin ko yung compressor at noise suppressor ng G2.1u :|?
Dahil naman sa pagbasa-basa sa thread na ito, parang ganito naman gusto kong mangyari----- Guitar>>>crybaby wah>>>bad monkey(boost)>>>GT2>>>G2.1u(mod)>>>BBE sonicstomp>>>amp :-). Mga sir OK bang pangboost ang bad monkey sa GT2?
Di pa ko nakaka-subok ng G2.1u, kaso sa experience ko sa Zoom multis, patayin mo yung noise gate unless ok lang sa iyo na halos ubos ang attack ng guitar mo. Also, put it in a true bypass looper. Pamatay sa tone yung bypass ng Zoom e.
Sa Bad Monkey, ok naman siya, but I'd go for something else. Good tone, bad bypass. Would rather get a locally made OD. As for the routing try mo muna sir. Ako kasi palipat lipat yung mga dirt pedals ko due to taste. Right now, dalawa boost ko. Isang pre-gain (for gain increase) at isang post-gain (for volume increase).
Title: Re: Post your pedalboard chain routing here!
Post by: kune_km on June 10, 2010, 07:58:32 AM
Guitar > Digitech Bad Monkey > Inamez TU30 Tuner > GCB95 Wah > DS1 Brit Mod > MT2 Ultra Gain Mod > BF2 > PH1R > Analog Delay > Zoom G1 > CH1 > Laney Cub10 > Stagg GA60R
Sa ngayon zoom G2.1u lang gamit ko pero dahil nagpabili na ako ng sansamp GT2 (inaantay ko pa rin dumating), magiging ganito na set-up ko ------- Guitar>>>GT2>>>G2.1u>>>amp. Ngayon ang tanong ko, OK lang ba mga sir kung gamitin ko yung compressor at noise suppressor ng G2.1u :|?
Medyo same setup tayu sir' ehe,
basta sa g2.1u sa pagkakaalam ko, hindi adviseable gamitan ng comp dahil normally ang comp nasa unahan dapat nung dist pedal which is the gt2, tapus un ata noise suppresor niya, para sakin lang, sa mga noise within the g2.1u lang yung tinatanggal niya,
I'm experimenting with the setup pa, pero i plan to have a mejo clean patch nalang sa g2.1u kasi hindi nga maganda na zoom bypass lang,
Di pa ko nakaka-subok ng G2.1u, kaso sa experience ko sa Zoom multis, patayin mo yung noise gate unless ok lang sa iyo na halos ubos ang attack ng guitar mo. Also, put it in a true bypass looper. Pamatay sa tone yung bypass ng Zoom e.
Sa Bad Monkey, ok naman siya, but I'd go for something else. Good tone, bad bypass. Would rather get a locally made OD. As for the routing try mo muna sir. Ako kasi palipat lipat yung mga dirt pedals ko due to taste. Right now, dalawa boost ko. Isang pre-gain (for gain increase) at isang post-gain (for volume increase).
basta sa g2.1u sa pagkakaalam ko, hindi adviseable gamitan ng comp dahil normally ang comp nasa unahan dapat nung dist pedal which is the gt2, tapus un ata noise suppresor niya, para sakin lang, sa mga noise within the g2.1u lang yung tinatanggal niya,
I'm experimenting with the setup pa, pero i plan to have a mejo clean patch nalang sa g2.1u kasi hindi nga maganda na zoom bypass lang,
Ah OK, dapat pala talaga nasa effects loop ng amp yung zoom kaya lang walang effects loop yung amp ko.
Salamat sa info mga bro...
in my case, i tried to put my zoom g1 sa effects loop ng amp ko. pero may konting hizz sound specially pag ginamitan ko ng distortion eh. kaya pinasok ko na lang sa chain yung zoom g1. di ko alam bakit may ingay sa ganung settings.
Title: Re: Post your pedalboard chain routing here!
Post by: spetsnaz1123 on June 10, 2010, 04:16:33 PM
basta sa g2.1u sa pagkakaalam ko, hindi adviseable gamitan ng comp dahil normally ang comp nasa unahan dapat nung dist pedal which is the gt2, tapus un ata noise suppresor niya, para sakin lang, sa mga noise within the g2.1u lang yung tinatanggal niya,
I'm experimenting with the setup pa, pero i plan to have a mejo clean patch nalang sa g2.1u kasi hindi nga maganda na zoom bypass lang,
Anong maisa-suggest mo na magandang true by-pass looper bro?
Title: Re: Post your pedalboard chain routing here!
Post by: lyrad24 on June 11, 2010, 12:50:44 AM
Under construction na pedalboard at chain routing:
Sayang yung mga modulation sa g2.1u ko, ehe, di ko magawan ng gusto kong clean patch, next time try ko ulit, pero ngayun I just sticked to this simple setup, aha (http://i81.photobucket.com/albums/j209/lyrad24/DSC00449.jpg)
Mas kuha yung clean lang na tone from the guitar kasi, :D
gitara >> GT2 >> OCD >> Boston SC >> Vol Pedal >> amp
Title: Re: Post your pedalboard chain routing here!
Post by: kurtseth on June 11, 2010, 05:55:01 AM
sa g2 ko modulations lang purely ang gamit ko and eq hehehe naka off ang zoom noise reduction and ang compresspor
so my chain is guitar>crybaby wah>badmonkey>ds1(markv britmod)>timmy clone by dimetronics>bypasslooper>
g2>amp
balak ko pang magdagdag ng warm sounding na analog :D para pag bypass ng g2
future setup ko
guitar>vol pedal>wah >bm>ds1>shredhead>ts808/ts9>bypass loop (ab switcher)>g2 echopark or DL4 :D
Title: Re: Post your pedalboard chain routing here!
Post by: g0d5_g1ft on June 11, 2010, 09:40:00 AM
sali po mga gitarista, Im a drummer pero eto setup ng guitar toys ko
slash crybaby -> OCDv4 clone -> Crunchbox v2 clone -> Boston HM100 -> Boston Chorus -> EP Booster Clone -> Line6 spider III 30w
Title: Re: Post your pedalboard chain routing here!
Post by: bluefilledmonday on June 11, 2010, 01:14:20 PM
my pedalboard routing
fulltone gt500 > proco rat 2 > catalinbread teaser stallion > semaphore tremolo > t.c. nova delay > boss ps3 > arion sch1 > boss ce2 > mxr phase 90 > boss dd7 > boss rv3 > amp
Title: Re: Post your pedalboard chain routing here!
Post by: solicitor_general02 on June 11, 2010, 02:28:42 PM
hybrid setup:
Guitar> dod comp> BH wah> boss Os2> Mi audio TZ> loop(digitech rp155)> boss dd20> mg10
Title: Re: Post your pedalboard chain routing here!
Post by: ingcokevin on June 12, 2010, 03:11:44 PM
I'm gonna need a new pedalboard for what's coming :/
Title: Re: Post your pedalboard chain routing here!
Post by: Gitaristang_Pulpol on June 16, 2010, 12:36:48 PM
utak >>> daliri>>>guitar >>> TS808 >>>TS808 (booster)>>>CE2>>>DD3>> amp...simpleng setup... enough na para kumain nang alikabok yung mga nagpost sa thread na to hahahahahahahaha joke...
Title: Re: Post your pedalboard chain routing here!
Post by: arkeetar on June 16, 2010, 12:41:36 PM
utak >>> daliri>>>guitar >>> TS808 >>>TS808 (booster)>>>CE2>>>DD3>> amp...simpleng setup... enough na para kumain nang alikabok yung mga nagpost sa thread na to hahahahahahahaha joke...
nice hahahaha :lol:
Title: Re: Post your pedalboard chain routing here!
Post by: kurtseth on June 16, 2010, 12:57:48 PM
utak >>> daliri>>>guitar >>> TS808 >>>TS808 (booster)>>>CE2>>>DD3>> amp...simpleng setup... enough na para kumain nang alikabok yung mga nagpost sa thread na to hahahahahahahaha joke...
ROFL
that i gotta see
Title: Re: Post your pedalboard chain routing here!
Post by: bhaahchico on June 16, 2010, 10:50:48 PM
utak >>> daliri>>>guitar >>> TS808 >>>TS808 (booster)>>>CE2>>>DD3>> amp...simpleng setup... enough na para kumain nang alikabok yung mga nagpost sa thread na to hahahahahahahaha joke...
buti nalang di pa ako nagpost dito.. wala akong nakaen haha lol :lol:
Title: Re: Post your pedalboard chain routing here!
Post by: Van* on June 17, 2010, 10:38:02 PM
utak >>> daliri>>>guitar >>> TS808 >>>TS808 (booster)>>>CE2>>>DD3>> amp...simpleng setup... enough na para kumain nang alikabok yung mga nagpost sa thread na to hahahahahahahaha joke...
Maglinis ka kc ng pedal board mo brow! 2 screamers pa nman yan sayang kung panay alikabok lng.
Yep, dalawa po ang amp ko na sabay ko ginagamit (para kunwari naka-cab ako, hehe!), i really loved the sound they produce when combined. Anyways, bedroom musician lang naman ako, so that does it for me.
Title: Re: Post your pedalboard chain routing here!
Post by: Gitaristang_Pulpol on June 21, 2010, 07:30:59 AM
Title: Re: Post your pedalboard chain routing here!
Post by: masterchoxter on June 23, 2010, 07:56:48 PM
current routing:
guitar > nobels odr-1 plus > amp :lol:
Title: Re: Post your pedalboard chain routing here!
Post by: cayle on June 23, 2010, 08:34:04 PM
guitar > tuner > barber > angelus > amp
:lol:
Title: Re: Post your pedalboard chain routing here!
Post by: kurtseth on June 24, 2010, 06:05:12 AM
guys question
if i were to put a gdi21 in my chain ( guitar>wah>boss sd-1>ds-1>timmyclone>bypass>g2) where should i put the gdi21?
should it be after the g2?since im going to use the di function?
Title: Re: Post your pedalboard chain routing here!
Post by: pipz_eyescream on July 07, 2010, 06:31:19 PM
I'm into multi effects before but now I'm trying to experiment (I still have some though). This GAS thing really hits me. hahaha.
Here's my setup. Correct me if I'm wrong, a newbie here. :-P
Guitar - Digitech EX-7 - Boss PSM 5 - Digitech Bad Monkey - Boss DS-2 - Boston EQ - Boss CH-1 - Boss AW-2 - Subzero T-007 (Gonna have this one prolly this week) - Boss Me-50 - Amp
I'm still thinking if I will add my Zoom 606 in this setup. :lol:
Title: Re: Post your pedalboard chain routing here!
Post by: bhaahchico on July 07, 2010, 08:53:32 PM
Title: Re: Post your pedalboard chain routing here!
Post by: everpogi on July 09, 2010, 05:20:08 PM
i started my 2nd pedalboard at eto ang routing nya:
guitar > boss AW-3 dynamic wah > boss PW-2 power driver > boss PSM-5 power switch [looper] > [loop A] boss SYB-3 bass synthesizer > boss PH-2 super phaser > boss RV-3 reverb/delay > return to boss PSM-5 > [loop B] artec EQ+tuner > amp
napakahelpful ng PSM-5 bilang simple looper.. akala ko pang-supply lang ng power ang role nito.. :wink:
Title: Re: Post your pedalboard chain routing here!
Post by: pualux on July 09, 2010, 06:55:57 PM
guitar>amp :-P
Title: Re: Post your pedalboard chain routing here!
Post by: Van* on July 09, 2010, 08:39:08 PM
Title: Re: Post your pedalboard chain routing here!
Post by: pualux on July 09, 2010, 10:16:55 PM
:-D
Title: Re: Post your pedalboard chain routing here!
Post by: modmod on July 09, 2010, 10:55:26 PM
Guitar-Dime wah-JH1 wah-MXR Comp-DS1-Dr.Boogie dual Rectifier-Ibanez TS9DX-Marshall SV1-Behringer DR100-DD3 Mabigat lang dalhin.Thanks sa Philmusic lahat ng gamit ko dito galing
Title: Re: Post your pedalboard chain routing here!
Post by: jesseboi on July 13, 2010, 07:20:00 AM
Title: Re: Post your pedalboard chain routing here!
Post by: oracodon on July 20, 2010, 09:58:57 PM
Incomplete pa ang pedalboard ko pero eto balak ko. Wala pang flanger at delay sa ngayon. Walang budget. :lol:
Guitar > OD > Chorus > Flanger > Delay > Amp
Ask ko lang, alin mas ok unahin? Chorus>Flanger or Flanger>Chorus? I have no idea, since both are modulation effects. Pati, san pala sinisingit ang loop station?
TIA.
Title: Re: Post your pedalboard chain routing here!
Post by: juan_alderete on July 20, 2010, 10:51:24 PM
building my live rig again, very simple setup for a very simple indie band were starting,, 40% complete, :evil:
Title: Re: Post your pedalboard chain routing here!
Post by: circle on July 20, 2010, 10:59:17 PM
Hello sa lahat. Currently eto lang setup ko....
Guitar > Ibanez Tuner > HellBabe > Boss SD2 > Boss CE2 > Very Old Roland Cube 60
meron pa akong Zoom 505 na gusto ko isali sa setup. based sa nabasa ko, its either ilagay ko siya before or after the SD2. any suggestions??? Im planning to use the 505 as a compressor, noise gate, signal booster or modulator (pero di ko gusto modulation effects nila so most likely di ko siya gamitin for that purpose).
Thanks.
Title: Re: Post your pedalboard chain routing here!
Post by: parirami on July 20, 2010, 11:07:02 PM
Title: Re: Post your pedalboard chain routing here!
Post by: masarapangtaho on July 21, 2010, 12:56:18 PM
i don't know if this is the right thread for this, is it wrong to stack THREE "dirt" pedals? currently i use a CC drive for my "clean" sound then boosted by a ds-1 as my main dirt. I tried adding a TS7 (in ts9 mode with drive knob on 8 o'clock position) just to give it some boost for solos.
para hindi OT: guitar >> korg pitchblack >> Dano CC Drive >> Boss DS-1 (modded) >> Ibanez TS-7 >> Boston DD100 >> Boston Noise Gate >> amp
Title: Re: Post your pedalboard chain routing here!
Post by: Van* on July 21, 2010, 08:30:20 PM
if it doesn't produce too much noise and you can still hear the guitar notes clearly,its fine.
Title: Re: Post your pedalboard chain routing here!
Post by: turiguiliano on July 21, 2010, 10:35:26 PM
i don't know if this is the right thread for this, is it wrong to stack THREE "dirt" pedals? currently i use a CC drive for my "clean" sound then boosted by a ds-1 as my main dirt. I tried adding a TS7 (in ts9 mode with drive knob on 8 o'clock position) just to give it some boost for solos.
para hindi OT: guitar >> korg pitchblack >> Dano CC Drive >> Boss DS-1 (modded) >> Ibanez TS-7 >> Boston DD100 >> Boston Noise Gate >> amp
To be frank, wala naman talagang wrong routing kasi it all goes back to what sound you want. Pero merong maling timpla =) you can use 3 dirts in chain pero ang active mo any given time is only 2 so ok lang... or timpla mo for instance is 3 sabay-sabay pero your using the 3rd date like an eq or the first drive as a preamp pwede pa rin... or gusto mo lang ng massive feedback and noise ok lang din... masakit sa tainga pero kung yun ang kailangan mo for your original sound and you can play it ok pa rin.
find your tone lang, your ears will tell you if it's not right.
Title: Re: Post your pedalboard chain routing here!
Post by: arkeetar on July 22, 2010, 07:28:18 AM
To be frank, wala naman talagang wrong routing kasi it all goes back to what sound you want. Pero merong maling timpla =) you can use 3 dirts in chain pero ang active mo any given time is only 2 so ok lang... or timpla mo for instance is 3 sabay-sabay pero your using the 3rd date like an eq or the first drive as a preamp pwede pa rin... or gusto mo lang ng massive feedback and noise ok lang din... masakit sa tainga pero kung yun ang kailangan mo for your original sound and you can play it ok pa rin.
find your tone lang, your ears will tell you if it's not right.
awesome. i was thinking lang kung overkill. pero i get the 3-on mechanics you pointed out. and that's what i am doing right now. thanks a lot sir. :-D
Title: Re: Post your pedalboard chain routing here!
Post by: turiguiliano on July 23, 2010, 03:51:16 AM
Look closely, the sides of the Zendrive and Kanji are not perfectly 90 degrees straight, unlike the BOSS enclosure. Because the connection between the two pedals is rigid, you put stress on the jacks each time you step on the pedals. Dahil hindi sila pantay. There's no relief for movements. If you have an all BOSS pedals, I guess it's fine since they all have fairly right angle enclosures. Worse, if your pedalboard has a soft surface where the pedals move when stepped on. You can look up this type if you really want to use a coupler, as it provides some relief by transferring some of the movements to the coupler itself:
Look closely, the sides of the Zendrive and Kanji are not perfectly 90 degrees straight, unlike the BOSS enclosure. Because the connection between the two pedals is rigid, you put stress on the jacks each time that you step on the pedals. Dahil hindi sila pantay. There's no relief for movements. If you have an all BOSS pedals, I guess it's fine since they all have a fairly right angle enclosures. Worse, if your pedalboard has a soft surface where the pedals move when stepped on. You can look up this type if you really want to use a coupler, as it provides some relief by transferring some of the movements to the coupler itself:
Upsizing again. My PT Pro just arrived yesterday. Lol. Getting another one. Filler up!
Just as I thought..I knew it wouldn't take that long for you to use a small board :lol:
Best, NINJeremy
Title: Re: Post your pedalboard chain routing here!
Post by: william251082 on July 23, 2010, 02:36:01 PM
Pedalboard update, many thanks to bossing Bart's advice! :-) Saka na pedaltrain, wala pang budget eh, PTnano kaya 'to or mini? (http://i921.photobucket.com/albums/ad60/piblips/CIMG2340.jpg)
Title: Re: Post your pedalboard chain routing here!
Post by: cayle on July 23, 2010, 04:16:29 PM
Gusto ko ng ganyan set-up sir. :-) PT Mini na or Jr., you'll never know when you'll add another one. :lol:
Brad may malaki na kong pedaltrain eh, etong set-up ay para mabilisan lang, kasya agad sa case ng gitara. :-D Mukhang bitin nga yung nano pero parang nalalakihan naman ako sa mini. :-D
Title: Re: Post your pedalboard chain routing here!
Post by: parirami on July 23, 2010, 04:22:46 PM
awesome. i was thinking lang kung overkill. pero i get the 3-on mechanics you pointed out. and that's what i am doing right now. thanks a lot sir. :-D
Actually overkill LOL (hindi ba nagstatic you'll need a noise gate) or just find that distortion tone you want and stick with just 1 pedal... hindi pa mahirap dalhin sa gig!
check this pic... 3 pre-amps, they all add distortions of their own layer upon layer.
awesome. i was thinking lang kung overkill. pero i get the 3-on mechanics you pointed out. and that's what i am doing right now. thanks a lot sir. :-D
Actually overkill LOL (hindi ba nagstatic you'll need a noise gate) or just find that distortion tone you want and stick with just 1 pedal... hindi pa mahirap dalhin sa gig!
check this pic... 3 pre-amps, they add distortions of their own layer upon layer.
Incomplete pa ang pedalboard ko pero eto balak ko. Wala pang flanger at delay sa ngayon. Walang budget. :lol:
Guitar > OD > Chorus > Flanger > Delay > Amp
Ask ko lang, alin mas ok unahin? Chorus>Flanger or Flanger>Chorus? I have no idea, since both are modulation effects. Pati, san pala sinisingit ang loop station?
TIA.
bump ko lang tong tanong ko
Title: Re: Post your pedalboard chain routing here!
Post by: r_chino18 on July 24, 2010, 08:55:48 PM
try putting the flanger after the dirt lalo kung ginagamit mo siya ng may dirt na kasabay para mas noticeable yung effect niya.. imo, kahit alin pwedeng mauna, either flanger or chorus.. :-)
about the loop station, sa dulo siya nilalagay para capture lahat ng tunog na gusto mo irecord.. :-)
Title: Re: Post your pedalboard chain routing here!
Post by: oracodon on July 24, 2010, 11:50:49 PM
try putting the flanger after the dirt lalo kung ginagamit mo siya ng may dirt na kasabay para mas noticeable yung effect niya.. imo, kahit alin pwedeng mauna, either flanger or chorus.. :-)
about the loop station, sa dulo siya nilalagay para capture lahat ng tunog na gusto mo irecord.. :-)
Alright then, thanks! :wink:
Title: Re: Post your pedalboard chain routing here!
Post by: bran_enzo on August 21, 2010, 02:20:47 PM
mga sir tanong...anu po mairerecommend nyong stomp box if urbandub at franco tugtogan ng isang gitarista?? :-)
Title: Re: Post your pedalboard chain routing here!
Post by: page8six.... on August 21, 2010, 02:53:28 PM
2 delays, phaser, Ds2, Mt2
now VS pedals na gmit nilang Dirts ,, Gab H2O,Doudle trouble od, John : J&H dist/od.
Title: Re: Post your pedalboard chain routing here!
Post by: weareathome on August 21, 2010, 05:01:37 PM
now VS pedals na gmit nilang Dirts ,, Gab H2O,Doudle trouble od, John : J&H dist/od.
e2 po ba ung gamit set up ng urbandub???
Title: Re: Post your pedalboard chain routing here!
Post by: page8six.... on August 22, 2010, 01:15:08 PM
yap but meron silang multis sa chain nila for preamp siguro?? kay Gab is korg di ko alam model heheh kay John Boss Me-50 for his 2nd delay, tremolo and wah. pero kung mag analog ka peda na siguro ang 2 delays, tremolo, phaser, mt2, ds2 ,ns2.. hehehe combination na yan ng kay gab and john. sana makatulong and kung may mali please correct me nalang.. :-D
Title: Re: Post your pedalboard chain routing here!
Post by: bran_enzo on August 22, 2010, 03:37:05 PM
matry nga tong set-up na toh...maraming salamt page8six
Title: Re: Post your pedalboard chain routing here!
Post by: parirami on August 23, 2010, 09:02:38 AM
Dulo yung lahat ng loops mo, right? Any advantage in not using the M13 for loop routing? You can setup scenes in latch mode na yung send/return mo is post-effects lahat so you can select from the board itself. Mas maliit yung board that way... although sayang lang yung switch board hindi magagamit... :P
Title: Re: Post your pedalboard chain routing here!
Post by: Gitaristang_Pulpol on August 26, 2010, 02:54:38 PM
synthaxe >>> BOSS NS2 >>>BOSS GE7>> 2.5watts amp
Title: Re: Post your pedalboard chain routing here!
Post by: pitongjerome on August 26, 2010, 03:29:15 PM
newest set up ko
guitar > amp
or
guitar > rp155 > peavey delta blues 210
or
guitar > amp with rp155 on effects loop
AIMING FOR: guitar > JnH > amp with rp155 on effects loop
Title: Re: Post your pedalboard chain routing here!
Post by: dextoi on October 27, 2010, 05:57:53 PM
GUITAR: Yamaha SA503 TVL - Marshall Blues Breaker - Boss FW2 Foot wah - DOD Grunge - DOD Icebox Chorus - Boss MD2 Mega Distortion - Boss ME70 Multi-effects Processor - Boss DD7 - Line6 Pocket Pod ---> AMP
KORG mini-kp (Kaoss Pad) connection:
Boss ME-70 (Rec out/ Phones) - Korg mini-kp (Line in) - Line out to: Line6 Pocket pod (aux in)
comments and suggestions are welcome po...
Title: Re: Post your pedalboard chain routing here!
Post by: dadaboo on October 27, 2010, 07:26:07 PM
Title: Re: Post your pedalboard chain routing here!
Post by: drong on October 27, 2010, 08:31:18 PM
guitar-vox845-Lu20-od3-sh-mxr6band.eq-ce5-dd3-amp. My next proj. Bare bone pedal set up. Guitar-Jnh-a.d.d-amp. waiting pa for now sa a.d.d still thinking mag add pa ako ng tuner. Sa tingin nyo mga bro?
Title: Re: Post your pedalboard chain routing here!
Post by: luin_theblue on October 27, 2010, 09:57:17 PM
i don't know if this is the right thread for this, is it wrong to stack THREE "dirt" pedals?
I use this for gainy stuff.: bad monkey > lpb-1 > shredhead You'd be surprised it's quiet. Well of course the shredhead's in a low-mid to mid gain setting but still. :mrgreen:
I also do: fuzz (from the Zoom pedal) > bad monkey > lpb-1 > shredhead.
Title: Re: Post your pedalboard chain routing here!
Post by: page8six.... on October 27, 2010, 10:05:47 PM
guitar>>WD7>>NS2>>Dr. boogie by Kevin>>BD2>>DS2>>DS1>>ME25>>GE7>>DD7>> Amp :-D
Title: Re: Post your pedalboard chain routing here!
Post by: posera!! on October 28, 2010, 12:24:13 AM
Title: Re: Post your pedalboard chain routing here!
Post by: jm the mute on October 30, 2010, 03:44:59 PM
update 10/30/2010
if di gamit sariling amp: guitar --> boss ps-2 > boss ge-7 > boss od-2 --> amp
if dala ko amp ko: guitar --> boss ps-2 > boss ge7 --> tube amp
i take out the boss ps-2 if di ko kailangan ng delay effects
Title: Re: Post your pedalboard chain routing here!
Post by: MYN11 on October 30, 2010, 04:56:23 PM
Guitar -> TC Electronic G-SYSTEM (Loop 1- Line6 PODxt Pro) -> Peavey JSX Head In
*Bank changes on PODxt Pro controlled via MIDI (G-System Midi OUT -> PODxt Pro Midi IN) *2 M-Audio EX-P Expression Pedals controlling the Volume and Expression via Pedal In of the G-System.
Title: Re: Post your pedalboard chain routing here!
Post by: luin_theblue on November 01, 2010, 01:00:06 AM
other pedals...> Boss DD -6 > dry signal out > Channel A of an A/B/Y Looper > EQ > Amp > wet signal out > another set of modulations and delays and verbs > Channel B of an A/B/Y Looper > back to EQ
Title: Re: Post your pedalboard chain routing here!
Post by: teleclem on November 01, 2010, 01:16:52 AM
Updated set-up(some are still in the mail):
Axe - modded Vox wah - Home Brew Electronics Powerscreamer w/ FB mod- Emma ReezaFratzits - Paul C. Timmy v2 - Analogman Chorus - Way Huge Aqua Puss - Strymon El Capistan tape echo - Amp
:-D
Title: Re: Post your pedalboard chain routing here!
Post by: doubletrouble on December 15, 2010, 05:13:09 PM
Title: Re: Post your pedalboard chain routing here!
Post by: Gitaristang_Pulpol on December 15, 2010, 08:40:33 PM
New Set Up
utak>>daliri>>gitara>> Ibanez TS-808>>BOSS CE-2>>BOSS DD-3>>amp...KABOOM!!!! pag may Shredhead na ako ano kaya mas ok pang boost sa kanilang dalawa nang TS-808??
Title: Re: Post your pedalboard chain routing here!
Post by: xelalien on December 15, 2010, 10:34:16 PM
my lazy setup as of now... sarap gumamit ng VST effects kasi :)
Title: Re: Post your pedalboard chain routing here!
Post by: kune_km on December 16, 2010, 09:59:35 AM
Acoustic Board: Guitar > Boss Ch1 > Analog Delay > GDI21 > Mixer
Electric GUitar Small Board: Guitar > GCB95 > Digitech Bad Monkey > Boss DS1 Brit Mod > Boss MT2 Ultra Gain Mod > Digitech Digidelay > Amp
Big Board: Guitar > GCB95 Bad Monkey > DS1 Brit > MT2 Ultra Gain > Boss PH1R > Boss BF2 > Boss CH1 > Analog Delay > Digitech Digidelay > GDI21 > Amp
Title: Re: Post your pedalboard chain routing here!
Post by: jm the mute on December 16, 2010, 10:06:08 AM
can't remember how many times ive posted on this thread....here's mine as of 12/16
yamaha sg600 /sg1000 > fulltone ocd v4 > any amp
still have afew pedals and gadgets in the drawer but only use them at home when im making demo recordings: ebow plus, nobels odr-1, ibanez de7, boss ge7
Title: Re: Post your pedalboard chain routing here!
Post by: KASALANAN on December 16, 2010, 10:08:25 AM
guitar >> Boss SD-1 >> Barber DirtyBomb >> Boss CH-1 >> EHX Holy Stain >> Digitech Digidelay >> AMP :-)
Title: Re: Post your pedalboard chain routing here!
Post by: bran_enzo on December 16, 2010, 11:20:40 AM
Power Supply (neatly tucked at the back, no messy masking tapes whatsoever, responsible for my super quiet board even when all the pedals are engaged! )
guitar--> looper--> 2 amps (fender pro junior and vox nighttrain) or (Fender twin reverb and Bugera 1960)
looper knobs(right to left): tuner-masterbypass-RMCwah-lovepedal univibe-rcbooster-OD pedal-microPOG--cs9chorus- mimic analog delay
Power Supply (neatly tucked at the back, no messy masking tapes whatsoever, responsible for my super quiet board even when all the pedals are engaged! )
OD pedals selections
hi bro, you've got some heavy stuff there. 8-)
what's the size of your board?
Title: Re: Post your pedalboard chain routing here!
Post by: william251082 on December 16, 2010, 03:25:26 PM
That's the correct way to use a vibe pedal: pre-dirt. I've seen a lot of boards in this forum where the vibe is placed after the dirt section.
William, try using the Pickle Vibe with a fuzz pedal. It's AWESOME.
Thanks bossing! I have to try that! ano bang fuzz pedal ang mai-rerecommend mo?, hindi ako makapili eh :-D Nag-decide nga akong mag univibe dahil kay Hendrix eh :lol:
I've read somewhere na yung POG dapat before the drive para walang latency, I tried both ways pero mas nagustuhan ko yung sound after the drive, kaya ganyan ang set-up ko.
Title: Re: Post your pedalboard chain routing here!
Post by: raidow on December 17, 2010, 07:06:58 AM
pitchblack->NG100->shredhead->DD3->PH3 8-)
Title: Re: Post your pedalboard chain routing here!
Post by: Garner on December 17, 2010, 08:26:40 AM
OS2 -> MXR EQ -> DL4 :)
Title: Re: Post your pedalboard chain routing here!
Post by: kurtseth on December 17, 2010, 10:09:34 AM
Before I used to place the SHO after my dirt as recommended by ZVEX, but for my ears it worked better after my wah. Mght go for an analog pedal or reverb at the end of the chain.
Title: Re: Post your pedalboard chain routing here!
Post by: guren on July 10, 2011, 12:14:35 AM
Hi guys. I'm new here but this is what I have so far:
Guitar (PRS Custom 24 SE) >> Boston HM-100 >> Bad Monkey >> AMP
I was looking at the following pedals and i'm still undecided on what to get next (mahal kasi haha): 1. Boss DD-3 2. MXR Dyna Comp or Boss CS-3 3. Digitech Multi-chorus or Digitech CF-7 or Cool Cat Chorus
I haven't found the need for other pedals (i.e. phase shifter/flanger/phaser)
Any suggestions? What about fuzz? Or use 2 bad monkeys? :D
Title: Re: Post your pedalboard chain routing here!
Post by: prinsipe_ng_sablay on July 10, 2011, 11:21:34 PM
Currently:
Guitar > RP90 > Amp
Di pa tapos project pedalboard ko hehe :-)
Title: Re: Post your pedalboard chain routing here!
Post by: coy_2cute on July 13, 2011, 06:13:31 PM
Guitar --> MXR 6 Band EQ --> A/B, A+B Looper --> Subzero Echobase --> Amp - - -- Channel A (EHX Double Muff) - -- Channel B (Marshall Jackhammer)
Title: Re: Post your pedalboard chain routing here!
Post by: BlackDiamond on July 13, 2011, 07:16:03 PM
Guitar--> Ibanez WD7--> Boss TU-2. The TU-2's output goes to the input of an A/B looper/switcher and the bypass out of the TU-2 goes to the Detector In of the Boss HR-2. The Zoom HL-01 and Zoom TM-01 are in the send/return loop of the Boss NS-2. The Zoom HL-01, Zoom TM-01 and Boss NS-2 are in loop A of the A/B looper/switcher. The Boss HR-2, Digitech Multichorus and Digitech Digidelay are in loop B of the A/B switcher, then A/B switcher's output--> DOD YJM308--> Dunlop High Gain Volume pedal---> amp.
hehehe nahilo ako dun ah.
Title: Re: Post your pedalboard chain routing here!
Post by: maximus0fficial on July 13, 2011, 08:23:13 PM
Title: Re: Post your pedalboard chain routing here!
Post by: kurtseth on July 13, 2011, 11:53:36 PM
guitar-crybaby-eb volume ped>(pitchblack in the tuner out) -d'zound (zendrive clone)-boston eq200-barber direct drive-shredhead-tc nova delay- behringer gi100 -amp
echo park out-timmy clone's dead
need modulation pedals soon and a timmy perhaps xD
Title: Re: Post your pedalboard chain routing here!
Post by: rowley75 on July 14, 2011, 12:13:01 AM
Title: Re: Post your pedalboard chain routing here!
Post by: brown on July 14, 2011, 09:56:36 AM
^ thanks! actually current set up is with the pitchblack na on the bottom right of the wah. I moved the inside board to the left which is screwed on the case itself. sorry, I havent gotten to take pictures yet. :-D
Title: Re: Post your pedalboard chain routing here!
Post by: everpogi on July 14, 2011, 01:21:12 PM
Guitar - Ibanez LU20 - Boss OS-2 - Boss PH-3 - Boss BF-3 - Boss DD-3 - Behringer GDI21 - Amp
waiting for Boss OD-3, TU-3 and AW-3. para ok na ang "3" series ng Boss setup ko.. heheheh..
:evil:
Title: Re: Post your pedalboard chain routing here!
Post by: brown on July 14, 2011, 04:50:15 PM
^ thanks! actually current set up is with the pitchblack na on the bottom right of the wah. I moved the inside board to the left which is screwed on the case itself. sorry, I havent gotten to take pictures yet. :-D
in response to this :-D
(http://i710.photobucket.com/albums/ww105/mt_chunli/SAM_1920.jpg) took pics awhile ago.
Title: Re: Post your pedalboard chain routing here!
Post by: lycan.neo on July 14, 2011, 09:25:02 PM
Title: Re: Post your pedalboard chain routing here!
Post by: wilay on July 21, 2011, 12:53:07 AM
Eto evolution ng pedalboard ko :-D
Noong college, dahil walang masyadong budget, ito lang: Guitar > Daphon wah > HM-100 > Amp
Pagkagraduate, nasira ang wah dahil di-sinasadyang naikabit ko ng baliktad ang polarity--bat ba kasi positive ang gusto niya? :lol: So, pinaltan ang wah: Guitar > Jimi Hendrix Crybaby > HM-100 > Amp
Kinakapos sa volume pag nagsosolo, so dinagdagan ng pangboost. Guitar > Jimi Hendrix Crybaby > HM-100 > MXR 10-band EQ > Amp
Tapos, naisipang ikumpara ang HM-100 sa original. At pagandahin na rin ang clean tone: Guitar > Jimi Hendrix Crybaby > MT-2 > HM-100 > MXR 10-band EQ > CE-200 > Amp
E nadiskubre ang PhilMusic, at nakahanap ng magandang distortion at chorus. At napansing nawawala sa tono minsan ang Floyd Rose: Guitar > Pitchblack > Jimi Hendrix Crybaby > Shredhead > MXR 10-band EQ > CE-5 > Amp
At nangailangan ng funky phaser para sa soul band: Guitar > Pitchblack > Jimi Hendrix Crybaby > Shredhead > MXR 10-band EQ > Phase 90 > CE-5 > Amp
Ngayon, dahil tapos na ang upgrade ng pickups ng gitara, hindi na masyadong kailangan ang chorus para sa magandang clean tone. Pinag-iisipan pa kung aalisin na ba siya sa board :lol:
Title: Re: Post your pedalboard chain routing here!
Post by: KASALANAN on July 21, 2011, 01:23:39 AM
boss dd6 then vol ped para nakakapag swell ako ng delays. kasi gamit ko na ngayon sg310 unlike before naka strat ako. abot ko lang yung vol knob :mrgreen:
Title: Re: behringer CS-100
Post by: nickson on June 02, 2013, 10:47:12 AM
Guitar--> Ibanez WD7--> Boss TU-2. The TU-2's output goes to the input of an A/B looper/switcher and the bypass out of the TU-2 goes to the Detector In of the Boss HR-2. The Zoom HL-01 and Zoom TM-01 are in the send/return loop of the Boss NS-2. The Zoom HL-01, Zoom TM-01 and Boss NS-2 are in loop A of the A/B looper/switcher. The Boss HR-2, Digitech Multichorus and Digitech Digidelay are in loop B of the A/B switcher, then A/B switcher's output--> DOD YJM308--> Dunlop High Gain Volume pedal---> amp.
Guitar--> Ibanez WD7--> Boss TU-2. The TU-2's output goes to the input the Zoom PD-01 then to the input of the A/B looper/switcher and the bypass out of the TU-2 goes to the Detector In of the Boss HR-2. The Zoom HL-01, Zoom TM-01 and the modded DOD YJM308 are in the send/return loop of the Boss NS-2. The Zoom HL-01, Zoom TM-01, modded DOD YJM308 and Boss NS-2 are in loop A of the A/B looper/switcher. The Boss HR-2, Digitech Multichorus and Digitech Digidelay are in loop B of the A/B switcher, then A/B switcher's output-->Dunlop High Gain Volume pedal---> amp.
:nosebleed:
Title: Re: Post your pedalboard chain routing here!
Post by: AnalogKiD on June 03, 2013, 01:39:26 PM
this is my favorite set-up also kaso since both my amps are clean (fender blues junior & fender blues deville), i need an od at least. my most minimal set-up is
guitar with clip-on tuner > od pedal > amp
Title: Re: Post your pedalboard chain routing here!
Post by: nitroaurora on June 05, 2013, 04:11:51 PM
no pedalboard but... Phaser > SD1 > Shredhead > Dano CC Chorus > DE7
Title: Re: Post your pedalboard chain routing here!
Post by: CeL1916 on June 05, 2013, 10:06:52 PM
san sa chain niyo ang EQ? sa unahan lang sakin pero baka may mas ok..
Title: Re: Post your pedalboard chain routing here!
Post by: deathkid on June 06, 2013, 05:18:54 PM
guitar - nady wireless system - korg pitchblack - mxr noise clamp - custom od808/ts9 - (kapag walang dalang amp) boss mt2 - behringer eq700 to amp
:-D
Title: Re: Post your pedalboard chain routing here!
Post by: Bolt Thrower on June 06, 2013, 07:48:37 PM
damn andito nanaman tong board na to.. gustong gusto ko to, anlinis tignan!
parang mga pedals na nakatayo sa pedestal...
Title: Re: Post your pedalboard chain routing here!
Post by: ebacoids on July 05, 2013, 10:30:04 AM
Amp > Boss BD-2 > MXR Micro amp > Vox Wah > Strat
Thats my current setup. But I'm planning on changing the micro amp to a fuzz pedal and adding a chorus or a tremolo. Suggestions on which fuzz, chorus or trem pedals?
Title: Re: Post your pedalboard chain routing here!
Post by: kalantari123 on July 06, 2013, 03:17:44 AM
Title: Re: Post your pedalboard chain routing here!
Post by: drazenjake on July 10, 2013, 07:26:19 PM
tanong lang po mga sir. paano po ayusin yung effects ko? eto po mga stomp ko. :-D
EHX Metal Muff Joyo US Dream Boston Noise Gate MXR Phase 90 DOD Stereo Flanger Zoom GFX-5
may nakapagsabi po kasi sa akin na mas maganda daw po kung magkasunod yung dirt pedals at yung noise gate pero meron yung mga time na parang hindi ko feel yun. hahaha :) help po :-D thanks!
Title: Re: Post your pedalboard chain routing here!
Post by: Shred_22 on July 10, 2013, 11:24:55 PM
tanong lang po mga sir. paano po ayusin yung effects ko? eto po mga stomp ko. :-D
EHX Metal Muff Joyo US Dream Boston Noise Gate MXR Phase 90 DOD Stereo Flanger Zoom GFX-5
may nakapagsabi po kasi sa akin na mas maganda daw po kung magkasunod yung dirt pedals at yung noise gate pero meron yung mga time na parang hindi ko feel yun. hahaha :) help po :-D thanks!
kung sakin yan ganito aayos ko jan
guitar-noise gate-phase90-us dream- metal muff-flanger-gfx 5-amp
btt. ito akin
guitar - 535q - TOD v1 - metal muff - eq - g3 - amp
Title: Re: Post your pedalboard chain routing here!
Post by: drazenjake on July 13, 2013, 05:38:31 PM
Title: Re: Post your pedalboard chain routing here!
Post by: scuttlebutter on July 26, 2013, 06:04:57 PM
right now, it's this - visual sound route 808 > tc electronic polytune mini > dunlop zw45 wah > okko diablo gain plus > barber trifecta > hermida zendrive > kalikot audio lss delay.
Title: Re: Post your pedalboard chain routing here!
Post by: joel_marcelo on July 26, 2013, 06:26:15 PM
Lol @pedalboard thread para sa walang camera. Ok sali ako:
Guitar- Cry Baby GCB 95 Wah- BBE Green Screamer- Boss Blues Driver- Wampler Pinnacle Deluxe- TC Electronics Nova Modulator- TC Electronics Nova Repeater- AMT Electronics Tweed Sound Preamp- Laney Cub12r
AMMK!
Title: Re: Post your pedalboard chain routing here!
Post by: gainsucker on July 26, 2013, 06:54:31 PM
guitar - empress buffer - diamond marquis - zenkudo - deep blue delay - reverberator - 68' Deluxe Reverb
Title: Re: Post your pedalboard chain routing here!
Post by: sweeplikevai on July 26, 2013, 07:19:52 PM
Lol @pedalboard thread para sa walang camera. Ok sali ako:
Guitar- Cry Baby GCB 95 Wah- BBE Green Screamer- Boss Blues Driver- Wampler Pinnacle Deluxe- TC Electronics Nova Modulator- TC Electronics Nova Repeater- AMT Electronics Tweed Sound Preamp- Laney Cub12r
AMMK!
para sa po yung TC electronics nova modulator..? tia.
Title: Re: Post your pedalboard chain routing here!
Post by: nickson on July 26, 2013, 07:21:14 PM
Uwian na.
Title: Re: Post your pedalboard chain routing here!
Post by: joel_marcelo on July 26, 2013, 07:40:27 PM
Title: Re: Post your pedalboard chain routing here!
Post by: newbee123 on December 24, 2013, 07:19:08 PM
noob question po..pano po ba gamitin ang fx loop ng amp? maypedalboard po ako lahat ng pedals running straight sa amp guitar input, pano ko ba mapaghiwalay yung dirt pedal sa front ng amp at yung modulation pedals sa fx loop sana? pano magiging koneksyon? procedure? kelangan pa po ba ng other gadget para magaw ito? salamat po...
Title: Re: Post your pedalboard chain routing here!
Post by: gainsucker on December 25, 2013, 03:07:29 PM
Title: Re: Post your pedalboard chain routing here!
Post by: scuttlebutter on January 28, 2014, 02:23:44 PM
my current pedalboard set-up:
1. tce polytune mini 2. lipton boost - always-on preamp; adds sparkle and makes everything sound better 3. dunlop zakk wylde wah - i love the range and warmth of this wah 4. barber ltd - main overdrive 5. okko diablo gain plus - for more rockin tunes 6. general guitar gadgets bluesbreaker clone - used as volume boost 7. kalikot audio lss delay - i use it for santana tunes
Title: Re: Post your pedalboard chain routing here!
Post by: voidmain on January 29, 2014, 12:10:41 PM
Haven't posted here in a long time.
Current routing: Kalikot Audio Hikari > Teese RMC-4 > Korg Pitchblack > Fulltone OCD > Blackout Effectors Musket Fuzz > Paul C Tim > Mooer Ensemble King (not mine) > Strymon El Capistan > Neunaber Stereo Wet
Title: Re: Post your pedalboard chain routing here!
Post by: ryechua on January 29, 2014, 12:18:52 PM
Looks fine to me. Though pagbabaliktarin ko yung Mooer at Zoom. I'm assuming gumagamit ka ng modulation effects sa Zoom
yes, using it for modulations and stereo out. I'm thinking na i-dispatch na mooer reecho.
Title: Re: Post your pedalboard chain routing here!
Post by: jamesplaysguitar on February 13, 2014, 04:00:53 PM
Share lang din my simple effects chain:
Guitar> Dyna compressor> Ibanez TS9> Fulltone fulldrive 2 mosfet> Catalinbread DLS v2> Morley Volume > Looper with (G2 in loop) > TC Nova Delay> Boss DD-20> Amp
Happy so far.. I might replace the G2 and looper with 1 modulation (multi) and 1 RV5 soon... That might be it.. or.. :wink:
Title: Re: Post your pedalboard chain routing here!
Post by: ninevoltrhythm on February 13, 2014, 04:12:28 PM
marked
Title: Re: Post your pedalboard chain routing here!
Post by: lolwat on February 13, 2014, 04:22:51 PM
I tried to clean out my pedalboard one time, and tried out a more traditional "daisy chain" setup, as follows:
guitar -> DOD Milkbox Compressor -> Joyo Vintage Overdrive -> MI Audio Tube Zone -> EHX Small Clone -> AMZ MOSFET Boost -> TC Electronic Flashback -> amp
It turns out that, while the Milkbox's buffer made my signal better when on its own, I found that it introduced a lot of noise into my signal when I turned on the drive pedals. Taking the Milkbox out completely made the signal sound quieter, but I needed a compressor on all the time for my cleans, so I hooked everything up using the old A/B switcher way.
On a side note, having a looper BEFORE all your other pedals can serve as a limited sort of reamping device, which can help with tweaking your settings to approach the sounds you hear from records more accurately. It's slightly more difficult to do it when you're busy playing your guitar AND turning knobs on your pedals.
Title: Re: Post your pedalboard chain routing here!
Post by: ninevoltrhythm on February 14, 2014, 05:36:45 PM
may problema ako sa volume pedal.. it affects my Mojo and Shredhead.. but i need the VP for volume control(of course) and swelling..
paano kaya to?
Try after shredhead or after GE7. I'm using active volume control with only expression pedal to get rid of potentiometer scratch
Title: Re: Post your pedalboard chain routing here!
Post by: gnarly on April 08, 2014, 03:50:22 AM
back to the pedal hunt. this thread's really helpful!
:wave:
Title: Re: Post your pedalboard chain routing here!
Post by: ziondelapena on April 08, 2014, 05:34:36 PM
Here's mine:
Strat -> Oxfuzz -> Dunlop Crybaby -> Fulltone Fulldrive 2 (Non-Mosfet) -> Xotic EP Booster -> Korg Pitchblack -> Danelectro FAB Chorus -> Boss DD-3
Most of the time, always on yung EP Booster. But I like to play around with the combinations and order ng pedals. Minsan, ginagamit kong solo boost yung EP Booster while using the Fulldrive's compcut mode. Pag maganda naman yung amp, ginagamit ko yung fuzz lang tapos ginagamit ko na lang yung volume knob ng guitar to add dirt. Balak ko mag-add ng octavia-type pedal at ng uni-vibe in the future. At bilang mahal sila, siguro in the distant future pa. :lol:
Title: Post your pedalboard chain routing here!
Post by: MYN11 on April 08, 2014, 06:51:49 PM
Title: Re: Post your pedalboard chain routing here!
Post by: charles55 on April 09, 2014, 03:54:19 PM
Since gumagamit ako ng AMT Preamps, heto ang setup ng chain ko. Ayos ang pre-amps ng AMT, pwede syang regualar distortion, pre-amp para sa effects loop, at may emulated cab out derecho sa mixer/PA system. :) Sa mga may preamps, hope this helps.
Title: Re: Post your pedalboard chain routing here!
Post by: gainsucker on April 09, 2014, 04:50:53 PM
in --> polytune--> honeubee --> fetto standard --> gekko --> out (http://i96.photobucket.com/albums/l189/jents81/7b9c9034-b703-4c81-be8b-ca83d5ae85a4_zpsd85176ac.jpg)
Title: Re: Post your pedalboard chain routing here!
Post by: j.nikko3123 on May 13, 2014, 08:54:50 PM
Sir how is the LS-2 doing? wala bang signal bleed?
ay sir, the LS-2 is doing a great job, and about sa signal, wala naman akong na experience na problema, or any delay sound pag nag change ako ng lines, sulit and it is very big help for me.
Title: Re: Post your pedalboard chain routing here!
Post by: j.nikko3123 on May 13, 2014, 09:15:42 PM
ay sir, the LS-2 is doing a great job, and about sa signal, wala naman akong na experience na problema, or any delay sound pag nag change ako ng lines, sulit and it is very big help for me.
Alright! thank you for that sir,I'm waiting for my LS-2 to arrive. cheers!
Title: Re: Post your pedalboard chain routing here!
Post by: Asurada666 on May 13, 2014, 09:26:29 PM
Alright! thank you for that sir,I'm waiting for my LS-2 to arrive. cheers!
Hahaha :) good for you sir,
but sir don't use a big L type jack like a PANCAKE Style jack when you put it to LS-2 cause it will not fit for 3 slot, it is more advisable to use LAVA or George L's or small type of jack.
Title: Re: Post your pedalboard chain routing here!
Post by: j.nikko3123 on May 13, 2014, 09:50:16 PM
but sir don't use a big L type jack like a PANCAKE Style jack when you put it to LS-2 cause it will not fit for 3 slot, it is more advisable to use LAVA or George L's or small type of jack.
Ok sir thank you for the head's up!
my chain will be -> Polytune -> Cry Baby gcb95f -> comp 66 -> mxr 10 band EQ -> Mxr Smart Gate -> J & H -> DLS MKIII -> Megalith Delta -> Mxr Smart Gate -> LS-2 (with zoom g5 on loop A) -> Ekko 616 Dark -> Hall of Fame
Title: Re: Post your pedalboard chain routing here!
Post by: kune_km on May 19, 2014, 04:11:14 PM
Since gumagamit ako ng AMT Preamps, heto ang setup ng chain ko. Ayos ang pre-amps ng AMT, pwede syang regualar distortion, pre-amp para sa effects loop, at may emulated cab out derecho sa mixer/PA system. :) Sa mga may preamps, hope this helps.
baka in the end zoom g3 nalang din and a dirt pedal matira sakin..haha
Hahaha dati kasi syempre gusto mo parang ang angas pag sobrang dami ng pedals saka yung mga tao pagtitinginan talaga pag andami kaya lang bilang player ang hirap naman tapakan kahit pa sabihin nating ginagamit mo lahat. Pinakahassle pa dyan eh ang pagbubuhat lalo na pag wala kang auto haha... Eh kung may pera lang para sa amp na maganda kahit wala nang pedal pedal eh tuner na lang laban na!
Title: Re: Post your pedalboard chain routing here!
Post by: gandydancer123 on October 29, 2014, 02:58:33 PM
Hahaha dati kasi syempre gusto mo parang ang angas pag sobrang dami ng pedals saka yung mga tao pagtitinginan talaga pag andami kaya lang bilang player ang hirap naman tapakan kahit pa sabihin nating ginagamit mo lahat. Pinakahassle pa dyan eh ang pagbubuhat lalo na pag wala kang auto haha... Eh kung may pera lang para sa amp na maganda kahit wala nang pedal pedal eh tuner na lang laban na!
Pinakahassle pa dyan eh ang pagbubuhat lalo na pag wala kang auto haha.
eto for me...hahaha thrill is gone nadin..nagsawa nadin sa wakas..siguro the occassional purchase once in a while..pero hindi tulad ng dati..parang gusto mo acquire lahat ng klaseng tunog..haha ok nadin..
Title: Re: Post your pedalboard chain routing here!
Post by: walanakamingyelo on October 29, 2014, 03:46:35 PM
eto for me...hahaha thrill is gone nadin..nagsawa nadin sa wakas..siguro the occassional purchase once in a while..pero hindi tulad ng dati..parang gusto mo acquire lahat ng klaseng tunog..haha ok nadin..
Mismo men... kahit nga gumawa ngayon ng pedal minsan nakakatamad na eh dahil sa trabaho... kaya andaming pending na projects di na nagagawa hahaha :lol:
Title: Re: Post your pedalboard chain routing here!
Post by: fretzburner on October 29, 2014, 04:21:27 PM
Ako din pa liit ng paliit na. Gtr-DIY 3n1 pedal (RCbooster/Pinnacle/Volume/DBDelay)-MS50g(FXloop ng 3n1)-Cabsim(xlr/PLjack)
Although may bigger board pa din, itong small board lang pinag abalahan ngayun. :-D
Title: Re: Post your pedalboard chain routing here!
Post by: halo88 on October 30, 2014, 10:46:51 AM
Kung active p-ups sir at mejo matapang na sa p-up pa lang I'd say noise gate muna. pero kung passive naman, I suggest scratch the noise gate then go with comp> od > dist > EQ o kaya naman pwede, Comp > OD > Dist > NG > EQ pero still, personally speaking I'd rather not put a noise gate on my chain.
Title: Re: Post your pedalboard chain routing here!
Post by: joancolar on October 30, 2014, 03:23:43 PM
Kung active p-ups sir at mejo matapang na sa p-up pa lang I'd say noise gate muna. pero kung passive naman, I suggest scratch the noise gate then go with comp> od > dist > EQ o kaya naman pwede, Comp > OD > Dist > NG > EQ pero still, personally speaking I'd rather not put a noise gate on my chain.
thanks sir! ittry ko walang noise gate. baka kasi sobra ingay pag nagsma comp, dist at od..
Title: Re: Post your pedalboard chain routing here!
Post by: walanakamingyelo on October 30, 2014, 03:41:09 PM
thanks sir! ittry ko walang noise gate. baka kasi sobra ingay pag nagsma comp, dist at od..
Di naman sir. Ano po ba tugtugan niyo? kasi kung mabigat na let's say metal tapos high gain ang mga pedals EX. 4 pataas na high gain, mejo kakailanganin mo nga ng noise gate pero kung hindi naman, pwede nang wala. I play metal with an EQ, OD SH and a fuzz mostly high gain pedals pero sa timpla naman eh naayos kaya pwede na kahit walang NG.
Title: Re: Post your pedalboard chain routing here!
Post by: joancolar on October 31, 2014, 05:34:49 PM
metal sir.. yan lang naman ung balak ko na set up hehe.. noise gate na lang tlga kulang :)
Title: Re: Post your pedalboard chain routing here!
Post by: walanakamingyelo on October 31, 2014, 08:06:09 PM
^ Swabe na yan sir laban na yan! timpla na lang! :razz:
Title: Re: Post your pedalboard chain routing here!
Post by: emg on November 10, 2014, 06:26:28 AM
Title: Re: Post your pedalboard chain routing here!
Post by: UselessFingers17 on February 22, 2015, 06:14:59 PM
guitar>polytune>shredhead>come on scream>PH3>TR2>DD3>MS50g>amp :wave:
Title: Re: Post your pedalboard chain routing here!
Post by: Zacchary_amadeus on July 28, 2015, 05:59:22 PM
Pahelp po.. Ano po magandang routing ng mga pedals ko.. 1. Boss cs3 compressor 2. Gt2 sansamp clone apax box of amps 3. Apax manila proverb 4. Joyo analog chorus 5. Mxr carbon copy analog delay 6. Soon on my pedal board Tech 21 sansamp para driver DI preamp
Thanks sa sasagot..
Title: Re: Post your pedalboard chain routing here!
Post by: arkeetar on July 29, 2015, 07:44:09 PM
makapag post lang ako medyo ganado lang...
guitar> Snark SN-10 pedal tuner > Xotic Robotalk RI > Jmorrero Mambalaw OD > Providence Heat Blaster > Jmorrero D'zound blackface > Jmorrero Compross (after dirt ehem) > T-rex Tap Tone Delay (ito na lang delay pedal ko hahaha) > Mooer Pitchbox > Malekko Spring Chicken Reverb pedal > amp
Title: Re: Post your pedalboard chain routing here!
Post by: cacophony on July 30, 2015, 09:48:20 AM
Pahelp po.. Ano po magandang routing ng mga pedals ko.. 1. Boss cs3 compressor 2. Gt2 sansamp clone apax box of amps 3. Apax manila proverb 4. Joyo analog chorus 5. Mxr carbon copy analog delay 6. Soon on my pedal board Tech 21 sansamp para driver DI preamp
Thanks sa sasagot..
Amp ◄ Tech21 sansamp para driver DI preamp ◄ MXR carbon copy analog delay ◄ Apax manila proverb ◄ Joyo analog chorus ◄ GT2 sansamp clone apax box of amps ◄ Boss cs3 compressor/sustainer ◄ Guitar